Inverse opal structure of SnO2 and SnO2 : Zn for gas sensing

In the present work, we propose a low cost synthetic sol-gel route that allows to produce high quality oxide nanostructures with inverse opal architecture which, transferred on alumina substrates provided with Pt interdigitated contacts and heater, are tested as gas sensing devices. An opal template of sintered monodisperse polystyrene spheres was filled with alcoholic solutions of metal oxide precursors and transferred on the alumina substrate. The polystyrene template was removed by thermal treatment, leading to the simultaneous sintering of the oxide nanoparticles. Beside SnO₂, a binary oxide well known for gas sensing application, a Zn containing ternary solid solution (SnO₂:Zn, with Zn 10% molar content) was taken into account for sensor preparation. The obtained high quality macro and meso-porous structures, characterized by different techniques, were tested for pollutant (CO, NO₂) and interfering (methanol) gases, showing that very good detection can be reached through the increase of surface area offered by the inverse opal structure and the tailoring of the chemical composition. The electrical characterization performed on the tin dioxide based sensors shows an enhancement of the relative response towards NO₂ at low temperatures in comparison with conventional SnO₂ sensors obtained with sputtering technique. The addition of Zn increases the separation between the operating temperatures for reducing and oxidizing gases and results in a further enhancement of the selectivity to NO₂ detection.

Fluorescent anion sensors based on 4-amino-1,8-naphthalimide that employ the 4-amino N-H

The new charge neutral 4-amino-1,8-naphthalimide based anion sensors 2 and 3 bind to both acetate and dihydrogenphosphate with 1:1 stoichiometry through hydrogen bonding to both thiourea N–H atoms and in the case of dihydrogenphosphate, the naphthalimide 4 amino N–H group as well. This was clearly established from ¹H NMR titration experiments with H₂PO₄^- in DMSO-d₆ where a substantial shift in the resonance for the naphthalimide N–H was observed concomitant with the expected migration of the thiourea N–H chemical shifts. The binding constants determined from the titration studies indicate that the new sensors bind H₂PO₄^- more strongly than AcO⁻. Fluorescence titrations with sensor 3 indicate quenching of 59% and 36% upon addition of acetate and dihydrogenphosphate, respectively.

Location based power control for energy critical sensors in a disconnected network

This paper provides a location based power control strategy for disconnected sensory nodes deployed for long term service. Power conservation is of importance particularly when sensors communicate with a mobile robot used for data collection. The proposed algorithm uses estimations from a Robust Extended Kalman Filter (REKF) with RSSI measurements, in implementing a sigmoid function based power control algorithm which essentially approaches a desired power emission trajectory based on carrier-to-interference ratios(CIR) to ensure interferenceless reception. The more realistic modelling we use incorporates physical dynamics between the mobile robot and the sensors together with the wireless propagation parameters between the transmitter and receiver to formulate a sophisticated and effective power control strategy for the exclusive usage of energy critical disconnected nodes in a sensory network increasing their life span.

Simple naphthalimide based anion sensors: deprotonation induced colour changes and CO2 fixation

The 4-amino-1,8-naphthalimide based chemosensors 2, 4 and 6 show striking green-to-purple colour changes due to the deprotonation of the 4-amino moiety on interaction with strongly basic anions such as F⁻: these colour changes reverse gradually with time due to the fixation of atmospheric CO₂ (as HCO₃⁻) yielding 1:1 adducts as demonstrated by X-ray crystallography.

Colorimetric and fluorescent anion sensors : an overview of recent developments in the use of 1,8-naphthalimide-based chemosensors

This critical review focuses on the development of anion sensors, being either fluorescent and/or colorimetric, based on the use of the 1,8-naphthalimide structure; a highly versatile building unit that absorbs and emits at long wavelengths. The review commences with a short description of the most commonly used design principles employed in chemosensors, followed by a discussion on the photophysical properties of the 4-amino-1,8-naphthalimide structure which has been most commonly employed in both cation and anion sensing to date. This is followed by a review of the current state of the art in naphthalimide-based anion sensing, where systems using ureas, thioureas and amides as hydrogen-bonding receptors, as well as charged receptors have been used for anion sensing in both organic and aqueous solutions, or within various polymeric networks, such as hydrogels. The review concludes with some current and future perspectives including the use of the naphthalimides for sensing small biomolecules, such as amino acids, as well as probes for incorporation and binding to proteins; and for the recognition/sensing of polyanions such as DNA, and their potential use as novel therapeutic and diagnostic agents (95 references).

SMS-based medical diagnostic telemetry data transmission protocol for medical sensors

People with special medical monitoring needs can, these days, be sent home and remotely monitored through the use of data logging medical sensors and a transmission base-station. While this can improve quality of life by allowing the patient to spend most of their time at home, most current technologies rely on hardwired landline technology or expensive mobile data transmissions to transmit data to a medical facility. The aim of this paper is to investigate and develop an approach to increase the freedom of a monitored patient and decrease costs by utilising mobile technologies and SMS messaging to transmit data from patient to medico. To this end, we evaluated the capabilities of SMS and propose a generic communications protocol which can work within the constraints of the SMS format, but provide the necessary redundancy and robustness to be used for the transmission of non-critical medical telemetry from data logging medical sensors.

Towards an interactive architecture for web-based databases

World Wide Web has brought us a lot of challenges, such as infinite contents, resource diversity, and maintenance and update of contents. Web-based database (WBDB) is one of the answers to these challenges. Currently the most commonly used WBDB architecture is three-tier architecture, which is still somehow lack of flexibility to adapt to frequently changed user requirements. In this paper, we propose a hybrid interactive architecture for WBDB based on the reactive system concepts. In this architecture, we use sensors to catch users frequently changed requirements and use a decision making manager agent to process them and generate SQL commands dynamically. Hence the efficiency and flexibility are gained from this architecture, and the performance of WBDB is enhanced accordingly.

Lease based addressing for event-driven wireless sensor networks

Sensor Networks have applications in diverse fields. They can be deployed for habitat modeling, temperature monitoring and industrial sensing. They also find applications in battlefield awareness and emergency (first) response situations. While unique addressing is not a requirement of many data collecting applications of wireless sensor networks it is vital for the success of applications such as emergency response. Data that cannot be associated with a specific node becomes useless in such situations. In this work we propose an addressing mechanism for event-driven wireless sensor networks. The proposed scheme eliminates the need for network wide Duplicate Address Detection (DAD) and enables reuse of addresses.