Permanent genetic resources added to molecular ecology resources database 1 August 2010 – 30 September 2010

This article documents the addition of 229 microsatellite marker loci to the Molecular Ecology Resources Database. Loci were developed for the following species: Acacia auriculiformis · Acacia mangium hybrid, Alabama argillacea, Anoplopoma fimbria, Aplochiton zebra, Brevicoryne brassicae, Bruguiera gymnorhiza, Bucorvus leadbeateri, Delphacodes detecta, Tumidagena minuta, Dictyostelium giganteum, Echinogammarus berilloni, Epimedium sagittatum, Fraxinus excelsior, Labeo chrysophekadion, Oncorhynchus clarki lewisi, Paratrechina longicornis, Phaeocystis antarctica, Pinus roxburghii and Potamilus capax. These loci were cross-tested on the following species: Acacia peregrinalis, Acacia crassicarpa, Bruguiera cylindrica, Delphacodes detecta, Tumidagena minuta, Dictyostelium macrocephalum, Dictyostelium discoideum, Dictyostelium purpureum, Dictyostelium mucoroides, Dictyostelium rosarium, Polysphondylium pallidum, Epimedium brevicornum, Epimedium koreanum, Epimedium pubescens, Epimedium wushanese and Fraxinus angustifolia.

Symmetrically tapered <30-micron-thick quasi-planar Ge waveguides as chemical sensors for microanalysis

Symmetrically tapered planar IR waveguides have been fabricated by starting with a ZnS coated concave piece of single-crystal Ge, embedding it in an epoxide resin as a supporting substrate, and then grinding and polishing a planar surface until the thickness at the taper minimum is <30 μm. Such tapering is expected to enhance a waveguide's sensitivity as an evanescent wave sensor by maximizing the amount of evanescent wave energy present at the thinnest part of the waveguide. As predicted by theory, the surface sensitivity, i.e., the absorbance signal per molecule in contact with the sensing region, increases with decreasing thickness of the tapered region even while the total energy throughput decreases. The signal-to-noise ratio obtained depends very strongly on the quality of the polished surfaces of the waveguides. The surface sensitivity is superior to that obtained with a commercial Ge attenuated total reflection (ATR) accessory for several types of sample, including thin films (<10 ng) and small volumes (<1 μL) of volatile solvents. By using the waveguides, light-induced structural changes in the protein bacteriorhodopsin were observable using samples as small as ∼50 pmol (∼1 μg). In addition, the waveguide sensors can reveal the surface compositions on a single human hair, pointing to their promise as a tool for forensic fiber analysis.

The use of Fe-30% Ni and Fe-30% Ni-Nb alloys as model systems for studying the microstructural evolution during the hot deformation of austenite

The development of physically-based models of microstructural evolution during thermomechanical processing of metallic materials requires knowledge of the internal state variable data, such as microstructure, texture, and dislocation substructure characteristics, over a range of processing conditions. This is a particular problem for steels, where transformation of the austenite to a variety of transformation products eradicates the hot deformed microstructure. This article reports on a model Fe-30wt% Ni-based alloy, which retains a stable austenitic structure at room temperature, and has, therefore, been used to model the development of austenite microstructure during hot deformation of conventional low carbon-manganese steels. It also provides an excellent model alloy system for microalloy additions. Evolution of the microstructure and crystallographic texture was characterized in detail using optical microscopy, X-ray diffraction (XRD), SEM, EBSD, and TEM. The dislocation substructure has been quantified as a function of crystallographic texture component for a variety of deformation conditions for the Fe-30% Ni-based alloy. An extension to this study, as the use of a microalloyed Fe-30% Ni-Nb alloy in which the strain induced precipitation mechanism was studied directly. The work has shown that precipitation can occur at a much finer scale and higher number density than hitherto considered, but that pipe diffusion leads to rapid coarsening. The implications of this for model development are discussed.

Ambient forest 30 sec

An ambient, new age style short composition featuring; African percussion and synths; 30 seconds in length.

Effective grain orientation on the substructure development of 304 stainless steel and NA-30% fe

This data is the result of an investigation into the effect of grain orientation on the substructure development of 304 stainless steel and a Ni-30wt.%Fe alloy. Both alloys have been used as model alloys to study the high temperature deformation of austenite. The development of the dislocation substructure as a function of strain, temperature and grain orientation was investigated using a combination of electron backscatterd diffraction (EBSD) and transmission electron microscopy (TEM).

Substructure and texture characteristics of the deformed matrix and dynamically recrystallized grains in a Ni-30%Fe austenitic alloy

The substructure and crystallographic texture characteristics of both the deformed matrix and dynamically recrystallized (DRX) grains were investigated in a Ni-30%Fe austenitic model alloy subjected to hot torsion. Deformation was performed at a temperature of 1000°C using strain rates of 1, 0.1 and 0.01 s-1, which produced a range of DRX grain sizes. Electron back-scattered diffraction and transmission electron microscopy were employed in the investigation. Both the deformed matrix and DRX grains revealed the texture components expected for simple shear deformation by crystallographic slip. The texture of DRX grains was dominated by low Taylor factor components as a result of their lower consumption rate during growth of these grains. There was a marked difference in the substructure characteristics between the deformed matrix and DRX grains regardless of the grain size and orientation. The deformed matrix substructure was largely characterized by organized, banded subgrain arrangements with alternating misorientations. By contrast, the substructure of DRX grains was generally more random in character and displayed complex, more equiaxed subgrain/cell arrangements characterized by local accumulation of misorientations. Based on the experimental observations, a mechanism of the distinct substructure development within DRX grains has been proposed.

Feminist geography 30 years on : they came, they saw but did they conquer?

Feminist geography emerged in Australia in the 1980s, spurred on by the local Women’s Liberation Movement and inspired by the academic activism emanating from England, Canada and the United States. Producing critical evaluations of male-dominated geography departments, curriculum and journals, feminist geographers proceeded to stake claims in each of these spheres while also substantially revising the content of geographical research. There were significant interventions into urban, social, cultural and economic geography, in environmental discourses as well as into the gendered research process. Having arrived, identified and addressed these issues, the discipline was critiqued and transformed over the 1980s and 1990s. Crucial to the strength of this critique were key individuals, the Gender and Geography Group within the Institute of Australian Geographers and the role played by journals such as Geographical Research and the Australian Geographer in providing spaces for feminist work. However, as the new century dawned, the agenda changed and the anger and urgency dissipated as the broader and university contexts altered. It was a period of consolidation, as feminist insights and approaches were focused on key subject areas – such as the home, identity and sexuality – and became more mainstream. But is this work and the presence of women in the academy an indication of success or of co-option? This paper will trace these various shifts – from the arrival to the mainstreaming of feminist geography - and analyse what might be read as a retreat from feminist politics and practice within the discipline in Australia. I will conclude by re-stating the case to advance a new feminist agenda in the face of continuing gender inequality within the academy, in Australia and across the globe.

"Lose 30lbs in 30 days" : assigning responsibility for deceptive advertising of weight-loss products

Purpose – The aim of this paper is to outline key social marketing issues apparent in deceptive weight-loss advertising, from the perspective of government policy-makers, manufacturers, the media, and consumers. The purpose is to examine the complexity of one aspect of the obesity battle and provide a framework for coordinated and integrated social marketing initiatives from a multiple stakeholder perspective.

Design/methodology/approach – The results of deceptive weight-loss advertising are framed using the harm chain model, and the paper offers recommended solutions based on a framework of marketing, education and policy changes across the network of stakeholders.

Findings – This paper concludes that a resolution to the harm created by deceptive weight-loss advertising can be achieved by the creation of a more holistic, system-wide solution to this important health and policy issue. This networked approach must involve all aspects of harm in a multi-stakeholder solution, including both upstream and downstream integration. Specific recommendations are made for policy-makers, manufacturers, the media, and consumers to achieve this goal.

Social implications – From a marketing perspective, analyzing the issue of deceptive weight-loss advertising using the harm chain allows for the creation of a more holistic, system-wide solution involving stakeholders in all aspects of harm for this important health and policy issue.

Originality/value – This research examines the problem of obesity and weight-loss advertising from the unique perspective of the harm chain framework. The authors make unified recommendations for various stakeholders including industry, media, government and consumers, in order to direct integrated social marketing and consumer-oriented strategies within this industry.