Placing space/time through photography’s old and new technologies

The discovery that an impressively strong 3-dimensional effect in a 2-dimensional photographic representation of natural outdoor scenes occurs when a single camera is directed around one point in the scene, thus drawing into relief the subject of attention and blurring the surrounding space, has important implications for understanding basic processes in 3-dimensional vision. For the development of new ways for generating 3D effects in motion and static representations of scenes we might well learn from photography’s old technologies, as well as digital technologies of the static print, which have yet to release the full impact of their potential in the representation of motion and space.

Shifting ground in some Australian photography

This is a report of a practice-as-research project. The chapter outlines McArdle's discoveries of means by which the pre-conscious processes of binocular vision and steropsis can be made visible in an effect which with one-eyed vision renders the scene 3-dimensional.

In the book's introduction editor Mehigan writes "[The] will to creation is only assayable once we estimate the role of the observer in the construction of space. McArdle's contribution, in engaging with the question of the animating presence of the observer focuses not just on what is caught in the lens of the photographer at the moment of depiction, but how the photographer's movement through space is the 'force field' that insinuates itself into the landscape and enters into a reciprocal relationship with it. The schematism of Euclidean geometry, for this reason, cannot account for the truth of the photographer's images; McArdle's metaphors are singularly non-Euclidean in their description of how objects are held together in the imaginative space of mental awareness."

Evolution of moisture management behavior of high-wicking 3D warp knitted spacer fabrics

Moisture management behavior is a vital factor in evaluating thermal and physiological comfort of functional textiles. This research work studies functional 3 dimensional (3D) warp knitted spacer fabrics containing high-wicking materials characterized by their profiled cross section. These spacer fabrics can be used for protective vest to absorb a user’s sweat, to reduce the humidity and improve user’s thermal comfort. For this reason, different 3D warp knitted spacer fabrics were produced with functional fiber yarns in the back layer of the fabric (close to the body) and polyester in the front and middle layers (outer surface). Comfort properties such as air and water vapor permeability and wicking and other moisture management properties (MMP) of different fabric samples were measured. It is demonstrated that by using profiled fibers such as Coolmax fiber, moisture management properties of spacer fabrics can be improved, enabling them to be use as a snug-fitting shirt worn under protective vests with improved comfort.

Estimating nephron number in the developing kidney using the physical disector/fractionator combination

Over the last decade the development of new molecular biology tools, advanced microscopy, live imaging and systems biology approaches have revolutionized our conception of how embryonic development proceeds. One fundamental aspect of development biology is the concept of morphogenesis: understanding how a group of multipotent cells organize and differentiate into a complex organ. In Kidney Development: Methods and Protocols, expert researchers in the field detail different approaches to tackle kidney development. These approaches include culture and live imaging aspects of kidney development, analyzing the 3-dimensional aspects of branching morphogenesis as well as nephrogenesis, manipulation of the gene/protein expression during kidney development as well as in the adult kidney, and how to assess kidney malformation and disease. Written in the highly successful Methods in Molecular Biology series format, chapters include introductions to their respective topics, lists of the necessary materials and reagents, step-by-step, readily reproducible laboratory protocols, and key tips on troubleshooting and avoiding known pitfalls. Authoritative and practical, Kidney Development: Methods and Protocols seeks to aid scientists in the further study of the process of morphogenesis which is fundamental important not only for studying developmental biology but also for regenerative medicine.

An experimental investigation of edge strain and bow in roll forming a V-section

V-sections were roll formed from two grades of steel, and the strain on the top and bottom of the strip near the edge was measured using electrical resistance strain gauges. The channels were bent to a radius of 2 and 15 mm along the centerline. The steel strips were of mild and dual phase steel of yield strength 367 MPa and 597 MPa respectively. The longitudinal bow was measured using a 3-dimensional scanning system. The strain measurements were analysed to determine bending and mid-surface strains at the edge during forming. The peak longitudinal edge strain increased with material yield strength for both profile radii. For the 15 mm radius, the bow was larger in the dual phase steel than in the mild steel. For the 2 mm profile radius, the bow was smaller compared with the 15 mm profile radius and it was similar for both steels. It was observed that the difference between the peak longitudinal edge strain and yield strength to Youngs modulus ratio of the material is an important factor in determining longitudinal bow.

Role of marsupial tammar wallaby milk in lung maturation of pouch young

Background: Marsupials such as the tammar wallaby (M.Eugenii) have a short gestation (29.3 days) and at birth the altricial young resembles a fetus, and the major development occurs postnatally while the young remains in the mother's pouch. The essential functional factors for the maturation of the neonate are provided by the milk which changes in composition progressively throughout lactation (300 days). Morphologically the lungs of tammar pouch young are immature at birth and the majority of their development occurs during the first 100 days of lactation. Results: In this study mouse embryonic lungs (E-12) were cultured in media with tammar skim milk collected at key time points of lactation to identify factors involved in regulating postnatal lung maturation. Remarkably the embryonic lungs showed increased branching morphogenesis and this effect was restricted to milk collected at specific time points between approximately day 40 to 100 lactation. Further analysis to assess lung development showed a significant increase in the expression of marker genes Sp-C, Sp-B, Wnt-7b, BMP4 and Id2 in lung cultures incubated with milk collected at day 60. Similarly, day 60 milk specifically stimulated proliferation and elongation of lung mesenchymal cells that invaded matrigel. In addition, this milk stimulated proliferation of lung epithelium cells on matrigel, and the cells formed 3-dimensional acini with an extended lumen. Conclusions: This study has clearly demonstrated that tammar wallaby milk collected at specific times in early lactation contains bioactives that may have a significant role in lung maturation of pouch young.

A highly interactive 3D programmable surface

Abstract : This presentation will focus on design, modularity, development and control of a highly interactive programmable surface created within the CISR. The system is comprised of thousands of pneumatic cylinders controlled simultaneously in real-time to create a highly dynamic and responsive 3 dimensional surface. The idea behind this research project was the creation of a dynamically responsive surface that configures in real-time according to input from a variety of electronic inputs (movements, sound, etc). The surface is also viewed potentially as a universal motional simulator platform. A simulator that was developed for ease of system reconfiguration demonstrates the translation of complex mathematical functions into 3D shapes in the virtual world before being generated on the real surface. Application areas span from optical telescope to product manufacturing and giant 3D screens billboards for advertising and artwork.

Slope stability charts for two-layered purely cohesive soils based on finite-element limit analysis methods

Stability charts for soil slopes, first produced in the first half of the twentieth century, continue to be used extensively as design tools, and draw the attention of many investigators. This paper uses finite-element upper and lower bound limit analysis to assess the short-term stability of slopes in which the slopematerial and subgrade foundation material have two distinctly different undrained strengths. The stability charts are proposed, and the exact theoretical solutions are bracketed to within 4.2% or better. In addition, results from the limit-equilibrium method (LEM) have been used for comparison. Differences of up to 20% were found between the numerical limit analysis and LEM solutions. It also shown that the LEM sometimes leads to errors, although it is widely used in practice for slope stability assessments.

Validity of a trunk-mounted accelerometer to measure physical collisions in contact sports

CONTEXT: Accelerometer peak impact accelerations are being used to measure player physical demands in contact sports. However, their accuracy to do so has not been ascertained. PURPOSE: To compare peak-impact-acceleration data from an accelerometer contained in a wearable tracking device with a 3-dimensional motion-analysis (MA) system during tackling and bumping. METHODS: Twenty-five semielite rugby athletes wore a tracking device containing a 100-Hz triaxial accelerometer (MinimaxX S4, Catapult Innovations, Australia). A single retroreflective marker was attached to the device, with its position recorded by a 12-camera MA system during 3 physical-collision tasks (tackle bag, bump pad, and tackle drill; N = 625). The accuracy, effect size, agreement, precision, and relative errors for each comparison were obtained as measures of accelerometer validity. RESULTS: Physical-collision peak impact accelerations recorded by the accelerometer overestimated (mean bias 0.60 g) those recorded by the MA system (P < .01). Filtering the raw data at a 20-Hz cutoff improved the accelerometer's relationship with MA data (mean bias 0.01 g; P > .05). When considering the data in 9 magnitude bands, the strongest relationship with the MA system was found in the 3.0-g or less band, and the precision of the accelerometer tended to reduce as the magnitude of impact acceleration increased. Of the 3 movements performed, the tackle-bag task displayed the greatest validity with MA. CONCLUSIONS: The findings indicate that the MinimaxX S4 accelerometer can accurately measure physical-collision peak impact accelerations when data are filtered at a 20-Hz cutoff frequency. As a result, accelerometers may be useful to measure physical collisions in contact sports.

Highly-twisted, continuous nanofibre yarns prepared by a hybrid needle-needleless electrospinning technique

Nanofibres prepared by electrospinning have shown enormous potential for various applications. They are obtained predominantly in the form of nonwoven fibre webs. The 2-dimensional nonwoven feature and fragility have considerably confined their further processing into fabrics through knitting or weaving. Nanofibre yarns, which are nanofibre bundles with continuous length and a twist feature, show improved tensile strength, offering opportunities for making 3-dimensional fibrous materials with precisely controlled fibrous architecture, porous features and fabric dimensions. Despite a few techniques having been developed for electrospinning nanofibre yarns, they are chiefly based on the needle electrospinning technique, which often has low nanofibre productivity. In this study, we for the first time report a nanofibre yarn electrospinning technique which combines both needle and needleless electrospinning. A rotating intermediate ring collector was employed to directly collect freshly-electrospun nanofibres into a fibrous cone, which was further drawn and twisted into a nanofibre yarn. This novel system was able to produce high tenacity yarn (tensile strength 128.9 MPa and max strain 222.1%) at a production rate of 240 m h^-1, with a twist level up to 4700 twists per metre. The effects of various parameters, e.g. position of the electrospinning units, operating conditions and polymer concentration, on nanofibre and yarn production were examined.

Differences in end range of motion vertical jump kinetic and kinematic strategies between trained weightlifters and elite short track speed skaters

The purpose of this investigation was to identify differences in end range of motion (ROM) kinetic and kinematic strategies between highly resistance and vertical jump-trained athletes and controls. Weightlifters (WL: n 4), short track speed skaters (STSS: n 5), and nonresistance-trained controls (C: n 6) performed 6 standing vertical squat jumps (SJ) and countermovement jumps (CMJ) without external resistance. Jump testing was performed using 3-dimensional marker trajectories captured with a 15-camera motion analysis system synchronized with 2 in-ground force plates. During SJ, there were large effects for the difference in time before toe off of peak vertical velocity between WL to STSS and C (ES: -1.43; ES: -1.73, respectively) and for the decrease between peak and toe off vertical velocity (ES: -1.28; ES: -1.71, respectively). During CMJ, there were large effects for the difference in time before toe off of peak vertical velocity between WL to STSS and C (ES: -1.28; ES: -1.53, respectively) and for decrease between peak and toe off vertical velocity (ES: -1.03; ES: -1.59, respectively). Accompanying these differences for both jump types were large effects for time of joint deceleration before toe off for all lower body joints between WL compared with C with large effects between WL and STSS at the hip and between STSS and C at the ankle. These findings suggest that the end ROM kinetic and kinematic strategy used during jumping is group-specific in power-trained athletes, with WL exhibiting superior strategies as compared with resistance- and jump-trained STSS.

Providing fairer resource allocation for multi-tenant cloud-based systems

A fundamental premise in cloud computing is trying to provide a more sophisticated computing resource sharing capability. In order to provide better allocation, the Dominant Resource Fairness (DRF) approach has been developed to address the "fair resource allocation problem" at the application layer for multi-tenant cloud applications. Nevertheless conventional DRF only considers the interplay of CPU and memory, which may result in over allocation of resources to one tenant's application to the detriment of others. In this paper, we propose an improved DRF algorithm with 3-dimensional demand vector to support disk resources as the third dominant shared resource, enhancing fairer resource sharing. Our technique is integrated with LINUX 'group' controls resource utilisation and realises data isolation to avoid undesirable interactions between co-located tasks. Our method ensures all tenants receive system resources fairly, which improves overall utilisation and throughput as well as reducing traffic in an over-crowded system. We evaluate the performance of different types of workload using different algorithms and compare ours to the default algorithm. Results show an increase of 15% resource utilisation and a reduction of 59% completion time on average, indicating that our DRF algorithm provides a better, smoother, fairer high-performance resource allocation scheme for both continuous workloads and batch jobs.

Decolorization and mineralization of an azo reactive dye using loaded nano-photocatalysts on spacer fabric: kinetic study and operational factors

In this study, the photocatalytic decolorization and mineralization of Remazol Black B (RBB), an azo reactive dye, in aqueous solutions was investigated using UV/H2O2/ZnO, UV/H2O2/TiO2 and UV/H2O2/ZnO:TiO2 systems. ZnO and TiO2 nanoparticles were loaded on 3-dimensional polyethylene terephthalate fabrics (spacer fabrics). Morphology of the spacer fabrics and the presence of the nanoparticles were studied by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS), respectively. Furthermore, the effects of key operational parameters on the efficiency of the decolorization were investigated. These parameters included initial pH value, initial hydrogen peroxide concentration, initial dye concentration, the loaded nanoparticle ratio and the presence of anions (sulfate, chloride and bicarbonate). Zero-, first- and second-order reaction kinetics were evaluated. Complete decolorization and high efficient mineralization with 90% total organic carbon (TOC) reduction were achieved at 120min treatment in the case of ZnO:TiO2 under optimum condition. The results proved that the novel heterogeneous photocatalytic process is capable of decolorizing and mineralizing azo reactive dyes in textile wastewater.

Physiological and behavioural factors influencing foraging success in otariid seals

 This thesis directly validated methods of estimating energetic gain and energetic expenditure in diving seals and sea lions. Results showed that head-mounted accelerometers and dive behaviour can predict foraging behaviour and energetic gain. In contrast, 3-dimensional body movement was unable to reliably predict energetic expenditure of diving pinnipeds.