Variation in the whiteness and brightness of mohair associated with farm, season, and mohair attributes

This work aimed to quantify factors affecting the reflectance attributes of Australian white mohair sourced from five different farms and to evaluate the effect of season and year on mohair grown by goats of known genetic origin in a replicated study. For the season study the mohair was harvested every three months for two years. All goats and their fleeces were weighed. Mid-side samples were tested for fibre diameter attributes, clean washing yield (CWY), staple length (SL) and for tristimulus values X, Y, Z and Y-Z. For the farm study (n = 196), linear models, relating Y, Z and Y-Z were fitted to farm of origin and other objective measurements. For the season and year study (n = 176), data were analysed by ANOVA and then by linear analysis. The variation accounted for by farm alone was: X, 22%; Y, 24%; Z, 12%; Y-Z, 30% (P < 0.001). Once farm had been taken into account, the regression models for X, Y and Z had similar significant terms: mean fibre diameter (MFD), CWY, SL and fibre diameter CV; and correlation coefficients (057–0.65). For Y-Z, in addition to farm only MFD was significant (P = 1.8 × 10−9). While X, Y, Z and Y-Z were significantly associated with clean fleece weight (CFwt), CFwt was not significant in any final model. Season affected mohair Y (P = 2.5 × 10−24), Z (P = 2.3 × 10−20) and Y-Z (P = 6.8 × 10−22). Autumn grown mohair had higher Y and Z, and summer grown mohair had lower Z than mohair grown in other seasons. This resulted in summer grown mohair having the highest Y-Z and winter grown mohair having the lowest Y-Z than mohair grown in other seasons. The differences between years in Y, Z and Y-Z were significant but not large. When Y, Z and Y-Z were modeled with season and other mohair attributes, MFD, CWY, CFwt, incidence of medullated fibre (Med) and sire were also significant terms. This model accounted for 62.1% of the variance. Over the range of Med (0.3–4.2%), Y-Z increased by 11 T units. Increasing CFwt 0.5 kg was associated with a decline in Y-Z of 7.5 T units. The variation in Y, Z and Y-Z associated with sire effects were respectively 2.66, 3.77, and 1.04 T units. In the farm and the season studies increasing MFD was associated with lower Y and Z and higher Y-Z. The extent of the differences in tristimulus values between seasons and years, were unlikely to be of commercial importance. The extent of the differences between farms, and to variations in MFD and Med were large enough to be of commercial importance. Clean mohair colour was artefactually biased by MFD.

Increased cross-education of muscle strength and reduced corticospinal inhibition following eccentric strength training

AIM: Strength training of one limb results in a substantial increase in the strength of the untrained limb, however, it remains unknown what the corticospinal responses are following either eccentric or concentric strength training and how this relates to the cross-education of strength. The aim of this study was to determine if eccentric or concentric unilateral strength training differentially modulates corticospinal excitability, inhibition and the cross-transfer of strength. METHODS: Changes in contralateral (left limb) concentric strength, eccentric strength, motor-evoked potentials, short-interval intracortical inhibition and silent period durations were analyzed in groups of young adults who exercised the right wrist flexors with either eccentric (N=9) or concentric (N=9) contractions for 12 sessions over 4weeks. Control subjects (N=9) did not train. RESULTS: Following training, both groups exhibited a significant strength gain in the trained limb (concentric group increased concentric strength by 64% and eccentric group increased eccentric strength by 62%) and the extent of the cross-transfer of strength was 28% and 47% for the concentric and eccentric group, respectively, which was different between groups (P=0.031). Transcranial magnetic stimulation revealed that eccentric training reduced intracortical inhibition (37%), silent period duration (15-27%) and increased corticospinal excitability (51%) compared to concentric training for the untrained limb (P=0.033). There was no change in the control group. CONCLUSION: The results show that eccentric training uniquely modulates corticospinal excitability and inhibition of the untrained limb to a greater extent than concentric training. These findings suggest that unilateral eccentric contractions provide a greater stimulus in cross-education paradigms and should be an integral part of the rehabilitative process following unilateral injury to maximize the response.

Microstructures, mechanical and corrosion properties and biocompatibility of as extruded Mg-Mn-Zn-Nd alloys for biomedical applications

Extruded Mg-1Mn-2Zn-xNd alloys (x=0.5, 1.0, 1.5 mass %) have been developed for their potential use as biomaterials. The extrusion on the alloys was performed at temperature of 623K with an extrusion ratio of 14.7 under an average extrusion speed of 4mm/s. The microstructure, mechanical property, corrosion behavior and biocompatibility of the extruded Mg-Mn-Zn-Nd alloys have been investigated in this study. The microstructure was examined using X-ray diffraction analysis and optical microscopy. The mechanical properties were determined from uniaxial tensile and compressive tests. The corrosion behavior was investigated using electrochemical measurement. The biocompatibility was evaluated using osteoblast-like SaOS2 cells. The experimental results indicate that all extruded Mg-1Mn-2Zn-xNd alloys are composed of both α phase of Mg and a compound of Mg7Zn3 with very fine microstructures, and show good ductility and much higher mechanical strength than that of cast pure Mg and natural bone. The tensile strength and elongation of the extruded alloys increase with an increase in neodymium content. Their compressive strength does not change significantly with an increase in neodymium content. The extruded alloys show good biocompatibility and much higher corrosion resistance than that of cast pure Mg. The extruded Mg-1Mn-2Zn-1.0Nd alloy shows a great potential for biomedical applications due to the combination of enhanced mechanical properties, high corrosion resistance and good biocompatibility.

Trabecular and cortical bone density and architecture in women after 60 days of bed rest using high-resolution pQCT: WISE 2005

Prolonged bed rest is used to simulate the effects of spaceflight and causes disuse-related loss of bone. While bone density changes during bed rest have been described, there are no data on changes in bone microstructure. Twenty-four healthy women aged 25 to 40 years participated in 60 days of strict 6-degree head-down tilt bed rest (WISE 2005). Subjects were assigned to either a control group (CON, n = 8), which performed no countermeasures; an exercise group (EXE, n = 8), which undertook a combination of resistive and endurance training; or a nutrition group (NUT, n = 8), which received a high-protein diet. Density and structural parameters of the distal tibia and radius were measured at baseline, during, and up to 1 year after bed rest by high-resolution peripheral quantitative computed tomography (HR-pQCT). Bed rest was associated with reductions in all distal tibial density parameters (p < 0.001), whereas only distal radius trabecular density decreased. Trabecular separation increased at both the distal tibia and distal radius (p < 0.001), but these effects were first significant after bed rest. Reduction in trabecular number was similar in magnitude at the distal radius (p = 0.021) and distal tibia (p < 0.001). Cortical thickness decreased at the distal tibia only (p < 0.001). There were no significant effects on bone structure or density of the countermeasures (p ≥ 0.057). As measured with HR-pQCT, it is concluded that deterioration in bone microstructure and density occur in women during and after prolonged bed rest. The exercise and nutrition countermeasures were ineffective in preventing these changes.

Motivation and barriers for leisure-time physical activity in socioeconomically disadvantaged women

INTRODUCTION: The aim of this study was to examine cross-sectional and longitudinal associations between motivation and barriers for physical activity, and physical activity behavior in women living in socioeconomic disadvantage. This study also examined whether weight control intentions moderate those associations.

METHODS: Data from 1664 women aged 18-46 years was collected at baseline and three-year follow-up as part of the Resilience for Eating and Activity Despite Inequality study. In mail-based surveys, women reported sociodemographic and neighborhood environmental characteristics, intrinsic motivation, goals and perceived family barriers to be active, weight control intentions and leisure-time physical activity (assessed through the IPAQ-L). Linear regression models assessed the association of intrinsic motivation, goals and barriers with physical activity at baseline and follow-up, adjusting for environmental characteristics and also physical activity at baseline (for longitudinal analyses), and the moderating effects of weight control intentions were examined.

RESULTS: Intrinsic motivation and, to a lesser extent, appearance and relaxation goals for being physically active were consistently associated with leisure-time physical activity at baseline and follow-up. Perceived family barriers, health, fitness, weight and stress relief goals were associated with leisure-time physical activity only at baseline. Moderated regression analyses revealed that weight control intentions significantly moderated the association between weight goals and leisure-time physical activity at baseline (β = 0.538, 99% CI = 0.057, 0.990) and between intrinsic motivation and leisure-time physical activity at follow-up (β = 0.666, 99% CI = 0.188, 1.145). For women actively trying to control their weight, intrinsic motivation was significantly associated with leisure-time physical activity at follow-up (β = 0.184, 99% CI = 0.097, 0.313).

CONCLUSIONS: Results suggest that, especially in women trying to control their weight, intrinsic motivation plays an important role in sustaining physical activity participation over time. Also, weight goals for being physically active seem to play a role regarding short-term physical activity participation in this particular population. Addressing these motivational features may be important when promoting physical activity participation in women living in socioeconomically disadvantaged neighborhoods.

Directional moisture transfer through a wild silkworm cocoon wall

A silkworm cocoon is a porous biological structure with multiple protective functions. In the current work, the authors have used both experimental and numerical methods to reveal the unique moisture transfer characteristics through a wild Antheraea pernyi silkworm cocoon wall, in comparison with the long-domesticated Bombyx mori silkworm cocoon walls. The water vapor transmission and water vapor permeability (WVP) properties show that the A. pernyi cocoons exhibit directional moisture transfer behavior, with easier moisture transfer from inside out than outside in [e.g., the average WVP is 0.057 g/(h m bar) from inside out and is 0.034 g/(h m bar) from outside in]. Numerical analysis shows that the cubic mineral crystals in the outer section of the A. pernyi cocoon wall create a rough surface that facilitates air turbulence and promotes disturbance amplitude of the flow field, leading to lengthened water vapor transfer path and increased tortuosity of the moist air. It also indicates the vortex of water vapor can be generated in the outer section of cocoon wall, which increases the diffusion distance of water vapor and enhances the turbulence kinetic energy and turbulence eddy dissipation, signifying higher moisture resistance in the outer section. The difference in moisture resistance of the multiple A. pernyi cocoon layers is largely responsible for the unique directional moisture transfer behavior of this wild silkworm cocoon. These findings may inspire a biomimicry approach to develop novel lightweight moisture management materials and structures.

Effective self-management strategies for bipolar disorder: a community-engaged Delphi consensus consultation study

BACKGROUND: Self-management represents an important complement to psychosocial treatments for bipolar disorder (BD), but research is limited. Specifically, little is known about self-management approaches for elevated mood states; this study investigated self-management strategies for: (1) maintaining balance in mood, and (2) stopping progression into hypomania/mania. METHODS: To identify the common components of BD self-management, Delphi Consensus Consultation methods were combined with a Community-Based Participatory Research (CBPR) approach across five study phases: (1) Qualitative dataset content analysis; (2) Academic/grey literature reviews; (3) Content analysis; (4) Two Delphi rounds (rating strategies on a 5-point Likert scale, Very Unhelpful-Very Helpful), and; (5) Quantitative analysis and interpretation. Participants were people with BD and healthcare providers. RESULTS: Phases 1 and 2 identified 262 and 3940 candidate strategies, respectively; 3709 were discarded as duplicates/unintelligible. The remaining 493 were assessed via Delphi methods in Phase 4: 101 people with BD and 52 healthcare providers participated in Round 1; 83 of the BD panel (82%) and 43 of the healthcare provider panel (83%) participated in Round 2-exploratory factor analysis (EFA) was conducted on Round 2 results. LIMITATIONS: EFA was underpowered and sample was not ethnically diverse, limiting generalizability. DISCUSSION: High concordance was observed in ratings of strategy effectiveness between the two panels. Future research could usefully investigate the provisional discovery here of underlying factors which link individual strategies. For example, 'maintaining hope' underpinned strategies for maintaining balance, and 'decreasing use of stimulants' underpinned strategies to interrupt hypo/manic ascent. There is merit in combining CBPR and Delphi methods.