Occupant behaviour simulation for cellular offices in early design stages - Architectural and modelling considerations

Building simulation is most useful and most difficult in early design stages. Most useful since the optimisation potential is large and most difficult because input data are often not available at the level of resolution required for simulation software. The aim of this paper is to addresses this difficulty, by analysing the predominantly qualitative information in early stages of an architectural design process in search for indicators towards quantitative simulation input. The discussion in this paper is focused on cellular offices. Parameters related to occupancy, the use of office equipment, night ventilation, the use of lights and blinds are reviewed based on simulation input requirements, architectural considerations in early design stages and occupant behaviour considerations in operational stages. A worst and ideal case scenario is suggested as a generic approach to model occupant behaviour in early design stages when more detailed information is not available. Without actually predicting specific occupant behaviour, this approach highlights the magnitude of impact that occupants can have on comfort and building energy performance and it matches the level of resolution of available architectural information in early design stages. This can be sufficient for building designers to compare the magnitude of impact of occupants with other parameters in order to inform design decisions. Potential indicators in early design stages towards the ideal or worst case scenario are discussed.

Designing architectural morphing skins with elastic modular systems

This paper discusses the issues of designing architectural skins that can be physically morphed to adapt to changing needs. To achieve this architectural vision, designers have focused on developing mechanical joints, components, and systems for actuation and kinetic transformation. However, the unexplored approach of using lightweight elastic form-changing materials provides an opportunity for designing responsive architectural skins and skeletons with fewer mechanical operations. This research aims to develop elastic modular systems that can be applied as a second skin or brise-soleil to existing buildings.The use of the second skin has the potential to allow existing buildings to perform better in various climatic conditions and to provide a visually compelling skin. This approach is evaluated through three design experiments with prototypes, namely Tent, Curtain and Blind, to serve two fundamental purposes: Comfort and Communication. These experimental prototypes explore the use of digital and physical computation embedded in form-changing materials to design architectural morphing skins that manipulate sunlight and act as responsive shading devices.

Selection of suitable passive cooling strategy for a subtropical climate

Background: Passive cooling system has become an attractive option to design and modify homes to achieve thermal comfort. The system provides cooling through the use of passive processes, which often use heat flow paths that do not exist in conventional or bioclimatic buildings.

Relationships between sleeve trial and wearer trial assessment of discomfort and objective measurements

The relationships were investigated between the prickle discomfort scores, assessed by human response from wearer trial garment assessment, and sleeve trial, Wool ComfortMeter (WCM) and Wool HandleMeter (WHM) assessments of fabrics, and fiber diameter characteristics including mean fiber diameter (MFD). Sleeve trial assessment followed exercise, the use of a control sleeve to reduce participant variance and four sensory traits. WHM provides eight handle parameters calibrated against a panel of experts. Four scenarios were evaluated: sleeve trial assessment with MFD; sleeve trial assessment with MFD and WCM; sleeve trial assessment with MFD, WCM and WHM parameters; and sleeve trial assessment with WCM and WHM parameters. Data were analyzed using correlation and forward stepwise general linear modeling. There was no evidence that the incidence of fibers coarser than 30 µm aided the prediction of prickle discomfort once MFD had been accounted for in the models. There were significant correlations between the WCM measurement and each sleeve trial attribute. There was no significant correlation between WHM parameters and sleeve trial assessments. The sleeve trial attribute of ‘skin feel’ offers potential to improve the predictions made of wearer trial prickle discomfort when used in association of the WCM with or without data on fabric MFD. There was little evidence to support using WHM parameters with or without the WCM in predicting wearer assessed prickle discomfort of fabrics. These results indicate that the rapid evaluation of fabrics using sleeve trial assessment can provide cost effective ranking of consumer preferences.

Library spaces designed with students in mind: an evaluation study of University of Queensland libraries at St Lucia campus

This paper identifies the design qualities of library spaces that matter the most foruniversity students. Drawing upon the data from an online survey made available to students from the University of Queensland, Australia, a number of design-related considerations are examined including: acoustics, furniture, interior architecture, lighting, and thermal comfort. 1505 students completed the survey, which aimed to assess how effective and responsive library spaces are in meeting students’ needs and supporting their learning experiences. The survey included ‘Likert scale questions’ requiring students to rate their levels of satisfaction with different aspects of library spaces and ‘open-ended questions’ asking students to elucidate their ratings. Findings revealed that the qualities of physical spaces were ranked as the third mostsignificant category of reasons accounting for students’ preference for certain library buildings over others, and for their frequency of visit (behind “location” of the library building and then “access to books and course-related materials or resources”). Design-related themes which emerged from qualitative analysis highlighted students’ awareness of the impacts that the design of spaces and furniture can have on their learning experiences. The study concludes with recommendations informed by students’ expectations, needs and preferences in relation to the qualities and features of library spaces.

Challenges in lifestyle and community interventions research

Earlier this year the BMC portfolio was enriched by a new journal BMC Obesity. Here, we present the aims and objectives of the section on Lifestyle and Community Interventions. Innovative research is needed. Preventing or managing obesity requires addressing different determinants across multiple levels where diverse levers and stakeholders can play a critical role. Interactions of these determinants within and between systems need to be studied. How to leverage, manage and measure this complexity underlies the innovation that is needed in the next generation of obesity interventions. The ambition of the Lifestyle and Community Interventions section is to provide a space for innovative research, including research that falls outside the traditional comfort zone. We welcome studies of heterogeneous designs, including those of qualitative, quantitative, mixed and systems methodologies. Studies of interest include not only outcomes research of interventions but also process evaluation, cost effectiveness or cost-benefit analysis, and implementation and dissemination research. Innovations that integrate diverse intervention levers or combine primary and secondary levels of prevention are particularly encouraged. The general aim of BMC Obesity’ s Lifestyle and Community Interventions section is to advance our ability to decide on what combinations of approaches will be required to effectively and equitably prevent obesity.

Associations between the physiological basis of fabric-evoked prickle, fiber and yarn characteristics and the Wool ComfortMeter value

The association between the incidents counted by the measurement wire of the Wool ComfortMeter (WCM) and the previously published neurophysiological basis for fabric-evoked prickle have been investigated for lightweight knitted woolen fabrics. The fiber lengths and diameters capable of triggering the fabric-evoked prickle sensation were calculated using Euler’s buckling formula, and it is suggested that fibers as fine as 10 mm are capable of triggering the prickle response if they have a short enough free length protruding from the surface. Good agreement was found between the sensory assessed human prickle sensation and the wearer prickle response predicted using the WCM outputs, especially when the latter were transformed using Stevens’s Psychophysical Power Law.

Clinical practice guidelines for nurse-administered procedural sedation and analgesia in the cardiac catheterization laboratory: a modified Delphi study

Aim : To develop clinical practice guidelines for nurse-administered procedural sedation and analgesia in the cardiac catheterization laboratory.

Background : Numerous studies have reported that nurse-administered procedural sedation and analgesia is safe. However, the broad scope of existing guidelines for the administration and monitoring of patients who receive sedation during medical procedures without an anaesthetist present means there is a lack of specific guidance regarding optimal nursing practices for the unique circumstances where nurse-administered procedural sedation and analgesia is used in the cardiac catheterization laboratory.

Methods : A sequential mixed methods design was used. Initial recommendations were produced from three studies conducted by the authors: an integrative review; a qualitative study; and a cross-sectional survey. The recommendations were revised according to responses from a modified Delphi study. The first Delphi round was completed by nine senior cardiac catheterization laboratory nurses. All but one of the draft recommendations met the predetermined cut-off point for inclusion with 59 responses to the second round. Consensus was reached on all recommendations.

Implications for nursing : The guidelines that were derived from the Delphi study offer 24 recommendations within six domains of nursing practice: Pre-procedural assessment; Pre-procedural patient and family education; Pre-procedural patient comfort; Intra-procedural patient comfort; Intra-procedural patient assessment and monitoring; and Postprocedural patient assessment and monitoring.

Conclusion : These guidelines provide an important foundation towards the delivery of safe, consistent and evidence-based nursing care for the many patients who receive sedation in the cardiac catheterization laboratory setting.

Chameleon hashing for secure and privacy-preserving vehicular communications

Many services and applications in vehicular ad-hoc networks (VANETs) require preserving and secure data communications. To improve driving safety and comfort, the traffic-related status information will be broadcasted regularly and shared among drivers. Without the security and privacy guarantees, attackers could track their interested vehicles by collecting and analyzing their traffic messages. Hence, anonymous message authentication is an essential requirement of VANETs. On the other hand, when a vehicle is involved in a dispute event of warning message, the certificate authority should be able to recover the real identity of this vehicle. To deal with this issue, we propose a new privacy-preserving authentication protocol with authority traceability using elliptic curve based chameleon hashing. Compared with existing schemes, our approach possesses the following features: 1) mutual and anonymous authentication for both vehicle-to-vehicle and vehicle-to-roadside communications, 2) vehicle unlinkability, 3) authority tracking capability, and 4) high computational efficiency. We also demonstrate the merits of our proposed scheme through security analysis and extensive performance evaluation.

Relationships between wearer assessment and the instrumental measurement of the handle and prickle of knitted wool fabrics

The relationships between wearer-assessed comfort and objectively measured comfort and handle parameters were investigated using 19 pure wool single jersey garments made of single ply yarns. Wearer trials were used to determine prickle discomfort, and whether wearers “liked” the garments. Fabrics then were objectively evaluated using the Wool HandleMeter, which measures seven primary handle attributes; and the Wool ComfortMeter (WCM), to predict a wearer's perception of fabric-evoked prickle. Wearer responses and the relationships within and between objective measurements and the effect of fibre, yarn and fabrics attributes were analysed by general linear modelling. Mean fibre diameter, fibre diameter coefficient of variation, yarn count, fabric thickness, fabric density, fabric mass per unit area and decatising affected one or more handle parameters. The best model for predicting wearer prickle discomfort accounted for 90.9% of the variance and included only terms for the WCM and WCM2. The WCM was a good predictor whereas mean fibre diameter was a poor predictor of whether wearers “liked” garments. Wearer assessment of prickle and whether or not wearers “liked” fabrics were independent of fabric handle assessment. The results indicate that the handle and comfort properties of lightweight, wool jersey fabrics can be quantified accurately using the Wool HandleMeter and the Wool ComfortMeter. For fabric handle, fibre and yarn characteristics were less important than changes in the properties of the fabric.

Functional fabrics with controlled wettability

Wettability is an essential property originating from liquid-solid contact and involved in various processes and applications. For fabric materials, the wettability plays important role that it can even determine the fabric’s usefulness and comfort feature. This book introduces three functional fabrics, such as superhydrophobic fabric, directional water-transfer fabric, and electrically conductive superhydrophobic fabric, which are prepared by tuning the fabric wettability using wet-chemical coating technologies. It covers details about the preparation of coating materials, coating processes, and detailed characterizations of the coatings and their effects on fabric properties.

The Art of Wool

An edited volume that examines the place of wool in the artistic imagination of Australia and considers visual relationships between art and fashion.Part of a wider curatorial project that brings together garments from the International Woolmark Prize archive with works from the Howard Hinton and Chandler Coventry Collections at New England Regional Art Museum. Editor's Introduction:Tanya Zoe Robinson'Introduction: stories of wool'Essay authors:Margaret Maynard, Honorary Research Consultant, Queensland University'Wool fashions: comfort, tactility, innovation'Adam Geczy, Senior Lecturer, Sydney College of the Arts'The art-fashion crossover'Christine France OAM'Wool in the artistic imagination of Australia'

Effects of variation in wool fiber curvature and yarn hairiness on sensorial assessment of knitted fabrics

Previous investigations have shown that prickle discomfort sensations of wool fabrics are primarily determined by the mean fiber diameter of the wool. It is also known that differences in wool fiber curvature (crimp) affect softness of handle of greasy wool and of wool textiles. In a replicated experiment, we investigated if wearers could detect the effect of using 17 µm superfine wool of low (74°/mm) or high (114°/mm) fiber curvature, and when the wools were blended with 17 µm cashmere (fiber curvature 49°/mm) in differing proportions, on four comfort sensations. Eight single jersey knitted fabrics were assessed under a controlled protocol using forearm sleeves made of the test fabric and a control fabric. Data (37 sensorial assessments of high curvature wool fabrics; 38 sensorial assessments of low curvature wool fabrics) were analyzed using linear mixed model analysis (restricted maximum likelihood), which included fixed effects for wool type and blend ratio and a random effect for participant. The use of a control sleeve fabric reduced variance due to participant effects by providing an anchor for each sensation over time. Wool fiber curvature affected participant assessment of breathability, comfort, feel after exercise (damp/dry) and skin feel (prickly/soft), with preferred values associated with high curvature (crimp) superfine wool. Increasing the proportion of cashmere in fabrics increased skin feel (better assessed softness). Skin feel was strongly associated with the evaluation of the fabrics by the Wool ComfortMeter and with increasing hairiness of yarns.