Accurate modeling of low actuation voltage RFMEMS switches using artificial neural networks

This paper presents a fast and accurate method for extracting the scattering parameters of a RF MEMS switch by using its essential parameters. A neural network is developed for parametric modeling of the switch. The essential parameters of the switch are analyzed in terms of its return loss and isolation with variation of its geometrical component values. Simulation results show that the proposed approach can be used to accurately model the RF characteristics of RF-MEMS switches. The results show good agreement between the neural network prediction and electromagnetic simulations.

Investigation of process dynamics and control of polystyrene batch reactor using hybrid model

The effects of operating conditions such as initiator and monomer concentration as well as reactor temperature of polymerization reactors are studied in this work. A recently developed hybrid model for polystyrene batch reactor is utilized in simulation study. The simulation results reveal the sensitivity of polymer properties and monomer conversion to variation of process operating conditions. In the second phase of this study, the optimization problem involving minimum time optimal temperature policy is considered for control study. An advanced neural network-based model predictive controller (NN-MPC) is designed and tested online. The experimental studies reveal that the developed controller is able to track the optimal setpoint with a minor oscillation and overshoot.

Online motor fault detection and diagnosis using a hybrid FMM-CART model

In this brief, a hybrid model combining the fuzzy min-max (FMM) neural network and the classification and regression tree (CART) for online motor detection and diagnosis tasks is described. The hybrid model, known as FMM-CART, exploits the advantages of both FMM and CART for undertaking data classification and rule extraction problems. To evaluate the applicability of the proposed FMM-CART model, an evaluation with a benchmark data set pertaining to electrical motor bearing faults is first conducted. The results obtained are equivalent to those reported in the literature. Then, a laboratory experiment for detecting and diagnosing eccentricity faults in an induction motor is performed. In addition to producing accurate results, useful rules in the form of a decision tree are extracted to provide explanation and justification for the predictions from FMM-CART. The experimental outcome positively shows the potential of FMM-CART in undertaking online motor fault detection and diagnosis tasks.

Comparison between response surface models and artificial neural networks in hydrologic forecasting

Developing an efficient and accurate hydrologic forecasting model is crucial to managing water resources and flooding issues. In this study, response surface (RS) models including multiple linear regression (MLR), quadratic response surface (QRS), and nonlinear response surface (NRS) were applied to daily runoff (e.g., discharge and water level) prediction. Two catchments, one in southeast China and the other in western Canada, were used to demonstrate the applicability of the proposed models. Their performances were compared with artificial neural network (ANN) models, trained with the learning algorithms of the gradient descent with adaptive learning rate (ANN-GDA) and Levenberg-Marquardt (ANN-LM). The performances of both RS and ANN in relation to the lags used in the input data, the length of the training samples, long-term (monthly and yearly) predictions, and peak value predictions were also analyzed. The results indicate that the QRS and NRS were able to obtain equally good performance in runoff prediction, as compared with ANN-GDA and ANN-LM, but require lower computational efforts. The RS models bring practical benefits in their application to hydrologic forecasting, particularly in the cases of short-term flood forecasting (e.g., hourly) due to fast training capability, and could be considered as an alternative to ANN

Medical diagnosis by fuzzy standard additive model with wavelets

This paper proposes a combination of fuzzy standard additive model (SAM) with wavelet features for medical diagnosis. Wavelet transformation is used to reduce the dimension of high-dimensional datasets. This helps to improve the convergence speed of supervised learning process of the fuzzy SAM, which has a heavy computational burden in high-dimensional data. Fuzzy SAM becomes highly capable when deployed with wavelet features. This combination remarkably reduces its computational training burden. The performance of the proposed methodology is examined for two frequently used medical datasets: the lump breast cancer and heart disease. Experiments are deployed with a five-fold cross validation. Results demonstrate the superiority of the proposed method compared to other machine learning methods including probabilistic neural network, support vector machine, fuzzy ARTMAP, and adaptive neuro-fuzzy inference system. Faster convergence but higher accuracy shows a win-win solution of the proposed approach.

Transfer learning using the online FMM model

In this paper, we present an analysis on transfer learning using the Fuzzy Min-Max (FMM) neural network with an online learning strategy. Transfer learning leverages information from the source domain in solving problems in the target domain. Using the online FMM model, the data samples are trained one at a time. In order to evaluate the online FMM model, a transfer learning data set, based on data samples collected from real landmines, is used. The experimental results of FMM are analyzed and compared with those from other methods in the literature. The outcomes indicate that the online FMM model is effective for undertaking transfer learning tasks.

Condition monitoring of broken rotor bars using a hybrid FMM-GA model

A condition monitoring system for induction motors using a hybrid Fuzzy Min-Max (FMM) neural network and Genetic Algorithm (GA) is presented in this paper. Two types of experiments, one from the finite element method and another from real laboratory tests of broken rotor bars in an induction motor are conducted. The induction motor with broken rotor bars is operated under different load conditions. FMM is first used for learning and distinguishing between a healthy motor and one with broken rotor bars. The GA is then utilized for extracting fuzzy if-then rules using the don’t care approach in minimizing the number of rules. The results clearly demonstrate the effectiveness of the hybrid FMM-GA model in condition monitoring of broken rotor bars in induction motors.

Motor fault detection and diagnosis using a hybrid FMM-CART model with online learning

In this paper, a hybrid online learning model that combines the fuzzy min-max (FMM) neural network and the Classification and Regression Tree (CART) for motor fault detection and diagnosis tasks is described. The hybrid model, known as FMM-CART, incorporates the advantages of both FMM and CART for undertaking data classification (with FMM) and rule extraction (with CART) problems. In particular, the CART model is enhanced with an importance predictor-based feature selection measure. To evaluate the effectiveness of the proposed online FMM-CART model, a series of experiments using publicly available data sets containing motor bearing faults is first conducted. The results (primarily prediction accuracy and model complexity) are analyzed and compared with those reported in the literature. Then, an experimental study on detecting imbalanced voltage supply of an induction motor using a laboratory-scale test rig is performed. In addition to producing accurate results, a set of rules in the form of a decision tree is extracted from FMM-CART to provide explanations for its predictions. The results positively demonstrate the usefulness of FMM-CART with online learning capabilities in tackling real-world motor fault detection and diagnosis tasks. © 2014 Springer Science+Business Media New York.

A clustering-based failure mode and effect analysis model and its application to the edible bird nest industry

Failure mode and effect analysis (FMEA) is a popular safety and reliability analysis tool in examining potential failures of products, process, designs, or services, in a wide range of industries. While FMEA is a popular tool, the limitations of the traditional Risk Priority Number (RPN) model in FMEA have been highlighted in the literature. Even though many alternatives to the traditional RPN model have been proposed, there are not many investigations on the use of clustering techniques in FMEA. The main aim of this paper was to examine the use of a new Euclidean distance-based similarity measure and an incremental-learning clustering model, i.e., fuzzy adaptive resonance theory neural network, for similarity analysis and clustering of failure modes in FMEA; therefore, allowing the failure modes to be analyzed, visualized, and clustered. In this paper, the concept of a risk interval encompassing a group of failure modes is investigated. Besides that, a new approach to analyze risk ordering of different failure groups is introduced. These proposed methods are evaluated using a case study related to the edible bird nest industry in Sarawak, Malaysia. In short, the contributions of this paper are threefold: (1) a new Euclidean distance-based similarity measure, (2) a new risk interval measure for a group of failure modes, and (3) a new analysis of risk ordering of different failure groups. © 2014 The Natural Computing Applications Forum.

A hybrid FAM–CART model and its application to medical data classification

In this paper, a hybrid model consisting of the fuzzy ARTMAP (FAM) neural network and the classification and regression tree (CART) is formulated. FAM is useful for tackling the stability–plasticity dilemma pertaining to data-based learning systems, while CART is useful for depicting its learned knowledge explicitly in a tree structure. By combining the benefits of both models, FAM–CART is capable of learning data samples stably and, at the same time, explaining its predictions with a set of decision rules. In other words, FAM–CART possesses two important properties of an intelligent system, i.e., learning in a stable manner (by overcoming the stability–plasticity dilemma) and extracting useful explanatory rules (by overcoming the opaqueness issue). To evaluate the usefulness of FAM–CART, six benchmark medical data sets from the UCI repository of machine learning and a real-world medical data classification problem are used for evaluation. For performance comparison, a number of performance metrics which include accuracy, specificity, sensitivity, and the area under the receiver operation characteristic curve are computed. The results are quantified with statistical indicators and compared with those reported in the literature. The outcomes positively indicate that FAM–CART is effective for undertaking data classification tasks. In addition to producing good results, it provides justifications of the predictions in the form of a decision tree so that domain users can easily understand the predictions, therefore making it a useful decision support tool.

Intelligent facial emotion recognition using a layered encoding cascade optimization model

In this research, we propose a facial expression recognition system with a layered encoding cascade optimization model. Since generating an effective facial representation is a vital step to the success of facial emotion recognition, a modified Local Gabor Binary Pattern operator is first employed to derive a refined initial face representation and we then propose two evolutionary algorithms for feature optimization including (i) direct similarity and (ii) Pareto-based feature selection, under the layered cascade model. The direct similarity feature selection considers characteristics within the same emotion category that give the minimum within-class variation while the Pareto-based feature optimization focuses on features that best represent each expression category and at the same time provide the most distinctions to other expressions. Both a neural network and an ensemble classifier with weighted majority vote are implemented for the recognition of seven expressions based on the selected optimized features. The ensemble model also automatically updates itself with the most recent concepts in the data. Evaluated with the Cohn-Kanade database, our system achieves the best accuracies when the ensemble classifier is applied, and outperforms other research reported in the literature with 96.8% for direct similarity based optimization and 97.4% for the Pareto-based feature selection. Cross-database evaluation with frontal images from the MMI database has also been conducted to further prove system efficiency where it achieves 97.5% for Pareto-based approach and 90.7% for direct similarity-based feature selection and outperforms related research for MMI. When evaluated with 90° side-view images extracted from the videos of the MMI database, the system achieves superior performances with >80% accuracies for both optimization algorithms. Experiments with other weighting and meta-learning combination methods for the construction of ensembles are also explored with our proposed ensemble showing great adpativity to new test data stream for cross-database evaluation. In future work, we aim to incorporate other filtering techniques and evolutionary algorithms into the optimization models to further enhance the recognition performance.

Prediction interval-based control of nonlinear systems using neural networks

Prediction interval (PI) is a promising tool for quantifying uncertainties associated with point predictions. Despite its informativeness, the design and deployment of PI-based controller for complex systems is very rare. As a pioneering work, this paper proposes a framework for design and implementation of PI-based controller (PIC) for nonlinear systems. Neural network (NN)-based inverse model within internal model control structure is used to develop the PIC. Firstly, a PI-based model is developed to construct PIs for the system output. This model is then used as an online estimator for PIs. The PIs from this model are fed to the NN inverse model along with other traditional inputs to generate the control signal. The performance of the proposed PIC is examined for two case studies. This includes a nonlinear batch polymerization reactor and a numerical nonlinear plant. Simulation results demonstrated that the proposed PIC tracking performance is better than the traditional NN-based controller.

DeepCare: a deep dynamic memory model for predictive medicine

Personalized predictive medicine necessitates the modeling of patient illness and care processes, which inherently have long-term temporal dependencies. Healthcare observations, recorded in electronic medical records, are episodic and irregular in time. We introduce DeepCare, an end-to-end deep dynamic neural network that reads medical records, stores previous illness history, infers current illness states and predicts future medical outcomes. At the data level, DeepCare represents care episodes as vectors in space, models patient health state trajectories through explicit memory of historical records. Built on Long Short-Term Memory (LSTM), DeepCare introduces time parameterizations to handle irregular timed events by moderating the forgetting and consolidation of memory cells. DeepCare also incorporates medical interventions that change the course of illness and shape future medical risk. Moving up to the health state level, historical and present health states are then aggregated through multiscale temporal pooling, before passing through a neural network that estimates future outcomes. We demonstrate the efficacy of DeepCare for disease progression modeling, intervention recommendation, and future risk prediction. On two important cohorts with heavy social and economic burden -- diabetes and mental health -- the results show improved modeling and risk prediction accuracy.