Cost performance of multi-rise structures in Australia

The article discusses the findings of research on the cost performance of structural frames. The analysis conducted is based on a range of designs that are commonly found in 10-storey buildings in Australia. The study explored the best cost solutions for any particular project through generic cost models of steel, concrete, and formwork systems used in commercial buildings. The research concluded that the most important factor in choosing structural building frames would be the unique characteristics of individual projects.

Examining and quantifying the drivers behind alterations and extensions to commercial buildings in a central business district

The drive to undertake building adaptation has increased in momentum, the primary reason being adaptation can be less expensive than new build and conventionally result in faster project delivery times. The issue of sustainable development is another clear driver for adaptation and collectively buildings contribute around half of all greenhouse gas emissions. At the same time governments seek effective and efficient ways of reducing the contribution of cities to climate change and building adaptation appears to offer a practical means of reducing building-related emissions. One example is the ‘1200 building program’ which aims to increase adaptation rates with a target of 1200 city centre office adaptations by 2020 as part of the strategy to achieve carbon neutrality. Through a longitudinal examination of building adaptations it is possible to identify the nature and extent of typical levels of adaptation, as well as determining the inter-relationship between different types of adaptation and building attributes. Melbourne city centre was used for a case study which analysed 5290 building adaptation events between 1998 and 2008. The findings promote the adaptive reuse of buildings in specific circumstances and are directly applicable for increasing sustainability in the built environment. The case study focused on existing buildings in a global city to ensure relevance to urban centres where existing commercial buildings can become part of the solution to mitigate climate change.

Spatial ecology of sooty owls in south-eastern Australian coastal forests : implications for forest management and reserve design

We investigated the home-range size and habitat use of eight Sooty Owls (Tyto tenebricosa tenebricosa) in coastal forests in East Gippsland, Victoria, Australia, between November 2006 and January 2008. The size of home-ranges varied widely; based on 95% adaptive kernel estimates, the average size of home-ranges of males was 3025ha (±1194s.d., n=3), whereas that of females was 994ha (±654s.d., n=5). Sooty Owls utilised a broad range of ecological vegetation classes and topographical features for roosting and foraging at a greater scale than previously assumed. There was minimal selection for habitat types based on floristic composition, primarily only avoiding heathlands (for foraging and roosting) and selecting particular dense foliage (rainforest and riparian scrub) for foliage roosting. Two Owls maintained home-ranges close to logged areas, with logging regrowth (<45 years old) being strongly avoided by both individuals. We recommend that the size of individual reserves for Sooty Owls in commercial forests should be increased to more closely resemble the core spatial resource requirements needed by a pair. Reserves should be largest where they feed predominantly on hollow-dependent prey. Most importantly, rather than conservation measures just focussing on the spatial requirements of Sooty Owls, efforts should be directed towards retaining high densities of crucial resources, such as hollow-bearing trees and mammalian prey species throughout the landscape.

Restructuring the architecture of state regulation in the Australian and Aotearoa/New Zealand cleaning industries and the growth of precarious employment

This paper examines changes in the commercial cleaning industry in Australasia which are occurring against a backdrop of significant transformation in the mode of labour market regulation in both countries. Specifically, whereas for most of the twentieth century both Aotearoa/New Zealand and Australia had systems of labour market regulation in which the state provided minimum wage and work protections through the interventions of arbitration courts, in the past few years these courts have either been abolished (in the case of New Zealand) or severely restricted in their ambit (in the case of Australia), all as part of a neoliberal effort to introduce “flexibility” into labour markets. The result has been an erosion of wages and a worsening of conditions of employment for cleaners and many other groups of workers. At the same time, this transformation in the architecture of labour market regulation poses significant challenges to unions seeking to represent cleaners and other low-paid service sector workers.

Incremental institutional change and Australian universities

Much has been written and researched about transformational change and the exogenous events that result in radical institutional transformation. This paper examines institutions as building blocks of social order comprising power and politics and shared understanding to bring about change. Thelen and Mahoney (2010) go beyond a general model of change that describes the collapse of one set of institutional norms to be replaced by another. The model of change proposed takes into account both exogenous as well as endogenous factors as being the source of institutional change. They go on to state that a view of transformation change as being a result of abrupt, wholesale breakdown needs to be rethought to include incremental, endogenous shifts in thinking that can often result in fundamental transformations. This paper gives consideration to these issues to propose the Australian Higher Education sector as a unique sample in which to investigate this type of change.

Testing the influence of survey method for building species distribution models of marine fishes

Accurate estimates of fish species occurrence are important to any species’ assessments and habitat suitability model. However, surveys of marine fishes are often biased by method. Surveys of marine fishes are often biased by method. Such bias could influence the interpretation of any habitat suitability model. With increasing emphasis on non-destructive sampling, underwater video techniques are commonly used without a thorough understanding of their advantages and disadvantages. This study compared data collected from baited remote underwater stereo-video systems and towed-video systems to provide occurrence data to develop habitat suitability models of nine temperate marine fishes. While numerous studies have compared modelling approaches in terms of model performance (i.e. via AUC or Kappa) the point of this paper was to highlight how very sensiblelooking, well-performing (based on AUC) models can provide different predictions of habitat suitability depending on which dataset is used.

Life cycle cost analysis of silicon and organic building integrated photovoltaic systems (BiPV)

Despite the undisputed benefits associated with photovoltaic (PV) technology, the financial barrier acts as the major hurdle before it is seen as a commercial competitive form of renewable energy. Many studies have been performed outlining the life cycle energy benefits of PV technology. However, there has been limited number of studies dedicated to the life cycle cost impacts. The aim of this paper is to identify whether life cycle cost analysis is the best approach to determining the cost contributors or savings associated with this technology. This paper has been structured similarly to previous life cycle energy studies to consider the cost implications involved within each area of the products lifecycle. Amongst many new developments, traditional silicon based units have been challenged by the introduction of new organic systems; and recent studies highlight that these systems offer major cost reductions. Based on an analysis of current literature, this paper identifies that the recent growth and development of both organic and silicon based systems have had a considerable effect on the cost of PV cells. The competitive nature of the renewable energy market will also impact on a life cycle cost analysis; and any potential findings will valid for a limited timeframe.

Knowledge-building : designing for learning using social and participatory media

This report presents the results of a classroom action research that looked at how one teacher redesigned her curriculum while integrating social media, Web 2.0 and face-toface teaching in an Australian public high school. It explores the qualities that social and participatory media bring to the classroom while focussing on students as active and valued participants in the learning process. Building knowledge using the uniqueness of social media enabled students to become active and valued resources for both the teacher and their peers. Designing for learning is a key challenge facing education today; this case offers ideas for learning designers and contributes to a research base that can support educators from all sectors.

The awkwardness of Australian engagement with Asia : the dilemmas of Australian idea of regionalism

Australia has experienced difficulties engaging with Asia-Pacific regional integration. Despite Australian attempts to punch above its weight in regional forums and to be a regional leader, it is still not regarded as a full member or as quite fitting into the region. It is an ‘awkward partner’ in the Asian context, and has experienced the ‘liminality’ of being neither here nor there. The former Rudd government’s proposal for an ‘Asia Pacific Community’ (APC) by the year 2020 was a substantive initiative in Australia’s ongoing engagement with Asia. It has, however, attracted a high level of criticism both at home and abroad. The main critical analysis of the proposal has focused on institutional building or architecture, or its relationship with existing regional institutions, but overlooks a host of often fraught questions about culture,
norms, identities, and international power relations. The APC concept needs to be scrutinized in terms of these questions with a critical eye. This paper examines the cultural, cognitive, and normative dimensions of Rudd’s proposal. It analyses four dilemmas or awkward problems that the APC faces.

When is a team a team? 'Teamworking' and the reorganisation of work in commercial cleaning

Purpose – The article seeks to analyse and explore the contradictions and variations in the concepts “team” and “teamwork” and their use in the NSW, Australia, commercial cleaning industry.

Design/methodology/approach – The article utilises an ethnographic study of a large Australian cleaning firm. Data were collected using participant observation, field notes, and interviews with managers.

Findings – The study provides evidence for the limited uptake of the idealised form of teamwork in commercial cleaning and suggests that teamworking is another means of coordinating groups of workers. Furthermore, the findings support previous research into the paradox of teams without teamwork.

Originality/value – The research provides an insight into the largely neglected area of the reorganisation of work in commercial cleaning. It also provides a critique of the concept of teams and teamworking.

Creative suburbs? How women, design and technology renew Australian suburbs

Australian suburbs have long been subjected to negative stereotyping – as aesthetic wastelands, politically conservative, socially isolated and environmentally rapacious – as the last places you would expect creativity. A critical engagement with this discourse and an examination of older as well as some newer suburbs unsettles these characterizations. A broad definition of ‘creativity’ directs attention to what was occurring in 20th century Australian suburbs – with a creative domestic economy and modernist architecture providing strong counters to their negative portrayal. Further, as a sample of Melbourne’s contemporary master-planned estates will illustrate, at least some of this city’s houses and neighbourhoods are at the leading edge of architectural innovation, community building and environmental sustainability – creatively developing alternatives to the stereotypical suburb.

Framework for improving the constructability of raised floor systems in Australian office buildings

Despite the great benefits that it can potentially contribute to modern workplace environment, raised floor system (RFS) encountered many barriers in the process of its applications for the fitout of office buildings in the Australian construction industry. Through a set of comprehensive research activities, the significant influence factors (SIFs) and problems associated with the RFS fitout implementation are identified. Further discussion of these SIFs and problems unearths a range of project level critical factors (PLCFs) pertaining to the RFS fitout design, construction, operation and maintenance, which presents firsthand checklists for the project team to review in the project delivery process. These factors need to be accommodated appropriately in order to enhance the implementation of the RFS fitout in Australian office buildings. Following a constructability study, a framework was developed by integrating these SIFs and PLCFs into the delivery of the RFS fitout in an aim to enhance the project constructability and minimize problems in the RFS service performance.