170 resultados para Lithium batteries
Resumo:
We report on the thermal, structural and conductivity properties of the organic ionic plastic crystal (OIPC) N-methyl-N-methyl-pyrrolidinium dicyanamide [C1mpyr][N(CN)2] mixed with the sodium salt Na[N(CN)2]. The DSC thermal traces indicate that an isothermal transition, which may be a eutectic melting, occurs at ~ 89 °C, below which all compositions are entirely in the solid phase. At 20 mol% Na[N(CN)2], this transition is the final melt for this mixture, and a new liquidus peak grows beyond 20 mol% Na[N(CN)2]. The III- > II solid-solid phase transition continues to be evident at ~- 2 °C. The microstructure for all the mixtures indicated a phase separated morphology where precipitates can be clearly observed. Most likely, these precipitates consist of a Na-rich second phase. This was also suggested from the vibrational spectroscopy and the 23Na NMR spectra. The lower concentrations of Na[N(CN)2] present complex 23Na MAS spectra, suggesting more than one sodium ion environment is present in these mixtures consistent with complex phase behavior. Unlike other OIPCs where the ionic conductivity usually increases upon doping or mixing in a second component, the conductivity of these mixtures remains relatively constant and above 10- 4 S cm- 1 at ∼ 80 °C, even in the solid state. Such high conductivities suggest these materials may be promising to be used for all solid-state electrochemical devices.
Resumo:
Two sulfonated ionomers based on poly(triethylmethyl ammonium 2-acrylamido-2-methyl-1-propane sulfonic acid) (PAMPS) and containing mixtures of Li+ and quaternary ammonium cations are characterised. The first system contains Li+ and the methyltriethyl ammonium cation (N
Resumo:
We report the first study of the characterisation of the organic ionic plastic crystal (OIPC) N-ethyl-N-methylpyrrolidinium tetrafluoroborate (C2mpyrBF4) upon mixing with a dendrimer additive. Whereas previous reports of OIPC composite formation (i.e. with ceramics and polymers) have typically reported a decrease in the conductivity when lithium salt had been added, the addition of dendrimer is shown to lead to a substantial enhancement in the lithium containing system, approaching 3 orders of magnitude at 30°C. Mechanical analysis indicates that dendrimer addition leads to a softer more ductile material while microscopy shows that the dendrimer is uniformly distributed and that the crystal microstructure is substantially disrupted, ultimately adopting a dendritic microstructure at 1mol% dendrimer content. Thermal analysis indicates a new phase in the lithium OIPC system, the crystallisation of which is suppressed in the presence of dendrimer. Instead, a decrease in the phase transition enthalpies indicates a large increase in the amorphous component of the Lithium OIPC, particularly for the most conductive system -C2mpyrBF4 +10mol% LiBF4 +0.1mol% dendrimer. Variable temperature powder X-ray diffraction confirms the presence of a new distinct phase and its absence in the presence of dendrimer. A change in the progression of the thermal phase behaviour of the OIPC in the presence of dendrimer is also shown, exhibiting the phase I (high temperature) structure at temperatures below the phase II-I transition.
Resumo:
Liquid plasma, produced by nanosecond pulses, provides an efficient and simple way to fabricate a nanocomposite architecture of Co3O4/CNTs from carbon nanotubes (CNTs) and clusters of Co3O4 nanoparticles in deionized water. The crucial feature of the composite's structure is that Co3O4 nanoparticle clusters are uniformly dispersed and anchored to CNT networks in which Co3O4 guarantees high electrochemical reactivity towards sodium, and CNTs provide conductivity and stabilize the anode structure. We demonstrated that the Co3O4/CNT nanocomposite is capable of delivering a stable and high capacity of 403 mA h g(-1) at 50 mA g(-1) after 100 cycles where the sodium uptake/extract is confirmed in the way of reversible conversion reaction by adopting ex situ techniques. The rate capability of the composite is significantly improved and its reversible capacity is measured to be 212 mA h g(-1) at 1.6 A g(-1) and 190 mA h g(-1) at 3.2 A g(-1), respectively. Due to the simple synthesis technique with high electrochemical performance, Co3O4/CNT nanocomposites have great potential as anode materials for sodium-ion batteries.
Resumo:
BACKGROUND: Treatment strategies for mental disorders may vary according to illness stage. However no data currently exist to guide treatment in first episode psychotic mania. The aim of this study was to compare the safety and efficacy profile of chlorpromazine and olanzapine, as add-on to lithium, in patients with a first episode of psychotic mania, expecting better safety profile and adherence to olanzapine but similar efficacy for both treatments. METHODS: Data from 83 patients were collected in an 8-week randomised controlled trial on clinical variables, side effects, vital signs, and weight. Analyses of treatment differences over time were based on intent-to-treat principles. Kaplan-Meier estimated survival curves were used to analyse time-to-event data and mixed effects models repeated measures analysis of variance were used to determine treatment group differences over time on safety and efficacy measures. RESULTS: Ethics committee approval to delay informed consent procedure until recovery from the acute episode allowed the inclusion of 83 patients highly representative of those treated in the public sector. Contrary to our hypotheses, safety profile of both medications was similar. A signal for higher rate (P=.032) and earlier occurrence (P=.043) of mania remission was observed in the olanzapine group which did not survive correction for multiple comparisons. CONCLUSIONS: Olanzapine and chlorpromazine have a similar safety profile in a uniquely representative cohort of patients with first episode psychotic mania. The possibility for a greater impact of olanzapine on manic symptoms leading to earlier remission of the episode needs exploration in a large sample.
Resumo:
Replacing organic liquid electrolytes with solid electrolytes has led to a new perspective on batteries, enabling high-energy battery chemistry with intrinsically safe cell designs. However, most solid/gel electrolytes are easily deformed; under extreme deformation, leakage and/or short-circuiting can occur. Here, we report a novel magneto-rheological electrolyte (MR electrolyte) that responds to changes in an external magnetic field; the electrolyte exhibits low viscosity in the absence of a magnetic field and increased viscosity or a solid-like phase in the presence of a magnetic field. This change from a liquid to solid does not significantly change the conductivity of the MR electrolyte. This work introduces a new class of magnetically sensitive solid electrolytes that can enhance impact resistance and prevent leakage from electronic devices through reversible active switching of their mechanical properties.
Resumo:
BACKGROUND: Cognitive deficits have been reported during the early stages of bipolar disorder; however, the role of medication on such deficits remains unclear. The aim of this study was to compare the effects of lithium and quetiapine monotherapy on cognitive performance in people following first episode mania. METHODS: The design was a single-blind, randomised controlled trial on a cohort of 61 participants following first episode mania. Participants received either lithium or quetiapine monotherapy as maintenance treatment over a 12-month follow-up period. The groups were compared on performance outcomes using an extensive cognitive assessment battery conducted at baseline, month 3 and month 12 follow-up time-points. RESULTS: There was a significant interaction between group and time in phonemic fluency at the 3-month and 12-month endpoints, reflecting greater improvements in performance in lithium-treated participants relative to quetiapine-treated participants. After controlling for multiple comparisons, there were no other significant interactions between group and time for other measures of cognition. CONCLUSION: Although the effects of lithium and quetiapine treatment were similar for most cognitive domains, the findings imply that early initiation of lithium treatment may benefit the trajectory of cognition, specifically verbal fluency in young people with bipolar disorder. Given that cognition is a major symptomatic domain of bipolar disorder and has substantive effects on general functioning, the ability to influence the trajectory of cognitive change is of considerable clinical importance.
Resumo:
The incorporation of polyvinylidene difluoride (PVDF) electrospun nanofibres within N-ethyl-N-methylpyrrolidinium tetrafluoroborate, [C
Resumo:
Electrolytes based on bis(fluorosulfonyl)imide (FSI) with a range of LiFSI salt concentrations were characterized using physical property measurements, as well as NMR, FT-IR and Raman spectroscopy. Different from the behavior at lower concentrations, the FSI electrolyte containing 1 : 1 salt to IL mole ratio showed less deviation from the KCl line in the Walden plot, suggesting greater ionic dissociation. Diffusion measurements show higher mobility of lithium ions compared to the other ions, which suggests that the partial conductivity of Li(+) is higher at this higher composition. Changes in the FT-IR and Raman peaks indicate that the cis-FSI conformation is preferred with increasing Li salt concentration.
Resumo:
Ionic Liquids based on the dicyanamide anion were found to support efficient, high-current zinc electrochemistry. Rechargeable batteries based on zinc metal and conductive polymers were also shown to store energy efficiently, while maintaining high rate capabilities over hundreds of cycles.
Resumo:
As liquid media at a temperature less than 100 °C that possess some level of ionic conductivity, it is immediately of interest to consider the use of ionic liquids (ILs) as electrolytes to carry out electrochemical processes. This has of course the origins of the modern era of interest in ionic liquids via the work of Wilkes and coworkers in the 1990s [1]. Applications in electrowinning and electrodeposition have developed including processes for a range of metals from copper and zinc to lithium and aluminium [2]. Some metals such as titanium remain, however, stubbornly difficult to electrodeposit [3]. A range of applications in electrochemical devices, including batteries, fuel cells, and solar cells have also emerged and are being thoroughly discussed in Volume 2 (Electrochemistry in ionic liquids. Applications). In parallel to this, there has emerged the need to understand more in detail some important fundamental concepts of electrochemistry as well as the interest on fundamental electrochemical process taking place in an ionic liquid medium and in identifying the ways in which the processes differ, or not, from conventional solvent systems as a result of the highly charged medium [4–6]. Thereby, in this book, special emphasis is placed on showing which aspects of electrochemistry in ionic liquids are different from electrochemistry in conventional solutions. Furthermore, new electrochemical concepts and theories are presented. The book commences with a deep and comprehensive discussion on electrode/electrolyte interface reactions, interface structure, and its critical properties for all electrochemical applications. Chapter 2 discusses these fundamental concepts along with some in situ techniques, such as electrochemical impedance and Fourier transform infrared spectroscopy, cyclic voltammetry, and electrochemical quartz crystal microbalance, suitable for the characterization of electrode/IL interfaces.
Resumo:
There is a growing interest to hybrid energy storage devices, such as lithium-ion capacitors, in which battery-type electrodes are combined with capacitor-type ones. It is anticipated that the energy density (either gravimetric or volumetric) of lithium-ion capacitors is improved if pseudocapacitive or fast insertion materials are used instead of conventional activated carbon (AC) in the capacitor-type electrode. MXenes, a new family of two-dimensional transition metal carbides, demonstrate metallic conductivity and fast charge-discharge behavior that make them suitable for this application. In this study, we move beyond single electrodes, half-cell studies and demonstrate three types of hybrid cells using Nb2CTx-carbon nanotube (CNT) films. It is shown that lithiated graphite/Nb2CTx-CNT, Nb2CTx-CNT/LiFePO4 and lithiated Nb2CTx-CNT/Nb2CTx-CNT cells are all able to operate within 3 V voltage windows and deliver capacities of 43, 24 and 36 mAh/g (per total weight of two electrodes), respectively. Moreover, the polarity of the electrodes can be reversed in the symmetric Nb2CTx-CNT cells from providing a positive potential between 0 and 3 V to a negative one from -3 to 0 V. It is shown that the volumetric energy density (50-70 Wh/L) of our first-generation devices with MXene electrodes exceeds that of a lithium titanate/AC capacitor.
Resumo:
Li(+) cation conducting ionomers based on poly(2-acrylamido-2-methyl-1-propane sulphonic acid) (PAMPS) incorporating a low molecular weight plasticizer have been characterized. Previously we have observed an apparent decoupling of ionic conductivity and lithium ion dynamics from the Tg of this ionomer along with an increase in ionic conductivity obtained by incorporating a quaternary ammonium co-cation. The incorporation of tetraglyme as a coordinating plasticizer was investigated in order to further improve the ion dissociation and dynamics. Solid-state NMR, thermal analysis, impedance spectroscopy and infrared spectroscopy were used to characterize these systems. As expected, the glass transition temperature Tg decreased upon the addition of the plasticizer. However, in contrast to the previously reported Na-conducting systems, the ionic conductivity was also decreased by several orders of magnitude, indicating that the tetraglyme recouples the conductivity back to the polymer dynamics. Temperature dependent (7)Li NMR line width and T1 measurements were used to probe the Li(+) dynamics, which were found to be dependent on the Li(+) concentration, the nature of the co-cation and the presence or absence of tetraglyme.
Resumo:
The electrochemical behaviour of a Sn-based anode in a potassium cell is reported for the first time. The material is active at low potentials vs. K/K(+), and encouraging capacities of around 150 mA h g(-1) are recorded. Experimental evidence shows that Sn is capable of alloying/de-alloying with potassium in a reversible manner.