The HWMD maturity model: a foundational framework to measure effectiveness of institutional research e-infrastructures

There is a nationally recognised need for a framework and tools to measure progress in implementing e-infrastructures for research from an institutional, organisational unit and service perspective. This paper describes the development of a prototype maturity model and self-assessment tool in response to that need. The authors present a background to the environment of technology enabling services for research and the challenges of fluidity of boundaries around traditional services and roles as institutions respond to the needs of the research community. The conceptual basis of the model is presented along with the model and its various elements that explain how the model is in its current form. The information provided in this paper, combined with field site test feedback, will promote discussion and debate amongst the community and opportunities will present to gather input to optimise the model. The next steps would be to further elaborate and test the constructs and indicators of the model in field test sites and to further develop the self -assessment tool.

Cancer Treatment Survey (CaTS): development and validation of a new instrument to measure patients' preparation for chemotherapy and radiotherapy

Objective: Cancer patients experience high levels of pre-treatment anxiety. Chemotherapy and radiotherapy are threatening medical procedures. Preparation for these procedures should include the provision of sensory and procedural information, and addressing fears. The aim of this study was to develop a cancer treatment survey (CaTS) to assess the preparation for chemotherapy and radiotherapy in cancer patients.

Methods: Drawing on evidence for how to prepare patients for threatening procedures, items were generated by psychosocial/clinical experts and pilot tested with cancer patients. The 36-item draft CaTS was administered to 192 cancer patients commencing chemotherapy for lymphoma, breast or colon cancer. Participants also completed the Hospital Anxiety and Depression Scale (HADS) and basic medical and demographic information was recorded.

Results: A systematic process of item selection removed 11 items. Factor analysis indicated a two-factor solution, with 11 items representing sensory/psychological concerns and 14 items representing procedural concerns. The two subscales demonstrated excellent internal reliability with Cronbach's alpha both over 0.90 and the average inter-item correlation for each scale exceeded 0.30. Divergent validity was established for both CaTS subscales with the HADS-A and-T (all r<0.30). Younger participants (under 65 years of age) had significantly greater procedural concerns (p = 0.001; medium effect).

Conclusions: The CaTS is a two factor, 25-item measure that assesses sensory/psychological concerns and procedural concerns relating to cancer treatment. The instrument provides a reliable and valid outcome measure for interventions to prepare cancer patients for chemotherapy and radiotherapy.

Fuzzy portfolio allocation models through a new risk measure and fuzzy sharpe ratio

A new portfolio risk measure that is the uncertainty of portfolio fuzzy return is introduced in this paper. Beyond the well-known Sharpe ratio (i.e., the reward-to-variability ratio) in modern portfolio theory, we initiate the so-called fuzzy Sharpe ratio in the fuzzy modeling context. In addition to the introduction of the new risk measure, we also put forward the reward-to-uncertainty ratio to assess the portfolio performance in fuzzy modeling. Corresponding to two approaches based on TM and TW fuzzy arithmetic, two portfolio optimization models are formulated in which the uncertainty of portfolio fuzzy returns is minimized, while the fuzzy Sharpe ratio is maximized. These models are solved by the fuzzy approach or by the genetic algorithm (GA). Solutions of the two proposed models are shown to be dominant in terms of portfolio return uncertainty compared with those of the conventional mean-variance optimization (MVO) model used prevalently in the financial literature. In terms of portfolio performance evaluated by the fuzzy Sharpe ratio and the reward-to-uncertainty ratio, the model using TW fuzzy arithmetic results in higher performance portfolios than those obtained by both the MVO and the fuzzy model, which employs TM fuzzy arithmetic. We also find that using the fuzzy approach for solving multiobjective problems appears to achieve more optimal solutions than using GA, although GA can offer a series of well-diversified portfolio solutions diagrammed in a Pareto frontier.

The development of a conceptual model and self-reported measure of occupational health and safety vulnerability

Injuries at work have a substantial economic and societal burden. Often groups of labour market participants, such as young workers, recent immigrants or temporary workers are labelled as being "vulnerable" to work injury. However, defining groups in this way does little to enable a better understanding of the broader factors that place workers at increased risk of injury. In this paper we describe the development of a new measure of occupational health and safety (OH&S) vulnerability. The purpose of this measure was to allow the identification of workers at increased risk of injury, and to enable the monitoring and surveillance of OH&S vulnerability in the labour market. The development included a systematic literature search, and conducting focus groups with a variety of stakeholder groups, to generate a pool of potential items, followed by a series of steps to reduce these items to a more manageable pool. The final measure is 29-item instrument that captures information on four related, but distinct dimensions, thought to be associated with increased risk of injury. These dimensions are: hazard exposure; occupational health and safety policies and procedures; OH&S awareness; and empowerment to participate in injury prevention. In a large sample of employees in Ontario and British Columbia the final measure displayed minimal missing responses, reasonably good distributions across response categories, and strong factorial validity. This new measure of OH&S vulnerability can identify workers who are at risk of injury and provide information on the dimensions of work that may increase this risk. This measurement could be undertaken at one point in time to compare vulnerability across groups, or be undertaken at multiple time points to examine changes in dimensions of OH&S vulnerability, for example, in response to a primary prevention intervention.

The competition between metastable and equilibrium S (Al2CuMg) phase during the decomposition of AlCuMg alloys

Abstract The decomposition sequence of the supersaturated solid solution leading to the formation of the equilibrium S (Al2CuMg) phase in AlCuMg alloys has long been the subject of ambiguity and debate. Recent high-resolution synchrotron powder diffraction experiments have shown that the decomposition sequence does involve a metastable variant of the S phase (denoted S1), which has lattice parameters that are distinctly different to those of the equilibrium S phase (denoted S2). In this paper, the difference between these two phases is resolved using high-resolution synchrotron and neutron powder diffraction and atom probe tomography, and the transformation from S1 to S2 is characterised in detail by in situ synchrotron powder diffraction. The results of these experiments confirm that there are no significant differences between the crystal structures of S1 and S2, however, the powder diffraction and atom probe measurements both indicate that the S1 phase forms with a slight deficiency in Cu. The in situ isothermal aging experiments show that S1 forms rapidly, reaching its maximum concentration in only a few minutes at high temperatures, while complete conversion to the S2 phase can take thousands of hours at low temperature. The kinetics of S phase precipitation have been quantitatively analysed for the first time and it is shown that S1 phase forms with an average activation energy of 75 kJ/mol, which is much lower than the activation energy for Cu and Mg diffusion in an Al matrix (136 kJ/mol and 131 kJ/mol, respectively). The mechanism of the replacement of S1 with the equilibrium S2 phase is discussed.

Validity of a trunk-mounted accelerometer to measure physical collisions in contact sports

CONTEXT: Accelerometer peak impact accelerations are being used to measure player physical demands in contact sports. However, their accuracy to do so has not been ascertained. PURPOSE: To compare peak-impact-acceleration data from an accelerometer contained in a wearable tracking device with a 3-dimensional motion-analysis (MA) system during tackling and bumping. METHODS: Twenty-five semielite rugby athletes wore a tracking device containing a 100-Hz triaxial accelerometer (MinimaxX S4, Catapult Innovations, Australia). A single retroreflective marker was attached to the device, with its position recorded by a 12-camera MA system during 3 physical-collision tasks (tackle bag, bump pad, and tackle drill; N = 625). The accuracy, effect size, agreement, precision, and relative errors for each comparison were obtained as measures of accelerometer validity. RESULTS: Physical-collision peak impact accelerations recorded by the accelerometer overestimated (mean bias 0.60 g) those recorded by the MA system (P < .01). Filtering the raw data at a 20-Hz cutoff improved the accelerometer's relationship with MA data (mean bias 0.01 g; P > .05). When considering the data in 9 magnitude bands, the strongest relationship with the MA system was found in the 3.0-g or less band, and the precision of the accelerometer tended to reduce as the magnitude of impact acceleration increased. Of the 3 movements performed, the tackle-bag task displayed the greatest validity with MA. CONCLUSIONS: The findings indicate that the MinimaxX S4 accelerometer can accurately measure physical-collision peak impact accelerations when data are filtered at a 20-Hz cutoff frequency. As a result, accelerometers may be useful to measure physical collisions in contact sports.

The need to revise the current methods to measure and assess static recrystallization behavior

Heterogeneous deformation developed during "static recrystallization (SRX) tests" poses serious questions about the validity of the conventional methods to measure softening fraction. The challenges to measure SRX and verify a proposed kinetic model of SRX are discussed and a least square technique is utilized to quantify the error in a proposed SRX kinetic model. This technique relies on an existing computational-experimental multi-layer formulation to account for the heterogeneity during the post interruption hot torsion deformation. The kinetics of static recrystallization for a type 304 austenitic stainless steel deformed at 900 °C and strain rate of 0.01s^-1 is characterized implementing the formulation. Minimizing the error between the measured and calculated torque-twist data, the parameters of the kinetic model and the flow behavior during the second hit are evaluated and compared with those obtained based on a conventional technique. Typical static recrystallization distributions in the test sample will be presented. It has been found that the major differences between the conventional and the presented technique results are due to the heterogeneous recrystallization in the cylindrical core of the specimen where the material is still partially recrystallized at the onset of the second hit deformation. For the investigated experimental conditions, the core is confined in the first two-thirds of the gauge radius, when the holding time is shorter than 50 s and the maximum pre-strain is about 0.5.

Active learning: the importance of developing a comprehensive measure

This article reports on an investigation into the validity of a widely used scale for measuring the extent to which higher education students employ active learning strategies. The scale is the active learning scale in the Australasian Survey of Student Engagement. This scale is based on the Active and Collaborative Learning scale of the National Survey of Student Engagement. The particular focus of the study was to investigate effects resulting from the addition of a small number of items to the active learning scale designed to capture some highly engaging, mostly online, activities. The items were developed in response to concerns that students studying in distance mode often report lower average scores on active learning scales than their on-campus counterparts. The additional items relate to activities such as working online with other students and faculty. The findings show that average scores on the Australasian Survey of Student Engagement/National Survey of Student Engagement scale increase significantly when the new items are included and that some differences between on-campus and distance education students narrow significantly. These findings have implications for the development of more robust and comprehensive instruments to measure active learning.

Development of a measure of health literacy for caregivers of people with cancer

Caregivers play a key role in supporting people with cancer. Little is known about challenges that caregivers might have when finding and understanding health information, making health-related decisions, and navigating the healthcare system. Using an innovative mixed-methods approach, the study developed and evaluated a tool to measure cancer caregiver health literacy.

Electrochemical impedance spectroscopy as a tool to measure cathodic disbondment on coated steel surfaces: capabilities and limitations

The disbondment of protective organic coatings under excessive cathodic protection potentials is a widely reported coating failure mechanism. Traditional methods of evaluating cathodic disbondment are based on ex situ visual inspection of coated metal surfaces after being exposed to standard cathodic disbondment testing conditions for a long period of time. Although electrochemical impedance spectroscopy (EIS) has been employed as an effective means of evaluating various anti-corrosion properties of organic coatings; its application for assessing the cathodic disbondment resistance of coatings has not been sufficiently exploited. This paper reports an experimental study aimed at developing EIS into a tool for in situ measurement and monitoring of cathodic disbondment of coatings. A clear correlation between EIS parameters and the disbonded coating areas has been confirmed upon short term exposure of epoxy-coated steel electrodes to cathodic disbondment conditions; however the degree of this correlation was found to decrease with the extension of exposure duration. This observation suggests that EIS loses its sensitivity with the propagation of coating disbondment, and that in order to achieve quantitative determination of the coating cathodic disbondment localized EIS measurements are required to measure the parameters related to local disbonded areas.

Psychometric properties of a tool to measure nurses' attitudes to single checking medications: SCAMS-II

BACKGROUND AND AIMS: Single checking medications has been increasingly adopted over the past decade by nurses in Australian healthcare services. However, attitudes toward the practice of only one nurse checking medications remain unclear. The aim of this article is to report on the development, reliability, and validity of a tool to measure nurses' attitudes to single checking medications in a health service in which single checking has been in place for over a decade. METHODS: In a cross-sectional survey design, the Single Checking and Administration of Medications Scale (SCAMS-II) was used to measure the attitudes of 299 registered nurses (RNs) who were single checking medications in one metropolitan teaching hospital in Australia. Exploratory factor analysis was used to explore the dimensions that best represented the SCAMS-II. Cronbach's α was used to assess internal consistency of the identified subscales. To test the construct validity of the emergent questionnaire, Confirmatory Factor Analysis and Rasch analyses were performed. RESULTS: The psychometric properties of the SCAMS-II revealed 12 items with three reliable subscales: a five-item accountability model; a four-item efficiency model; and a three-item knowledge model. LINKING EVIDENCE TO ACTION: In settings where single checking is current practice, the SCAMS-II is recommended as a reliable tool to measure nurses' attitudes toward the single checking of medications. The findings from this study may assist healthcare organizations in the development of policy and procedure guidelines for the safe administration of medications.

Cultural intelligence (CQ) in virtual, cross-cultural interactions: generalizability of measure and links to personality dimensions and task performance

Previous studies have focused on investigating CQ in face-to-face contexts but very few have assessed CQ in virtual, cross-cultural interactions. This study highlights the relevance of cultural intelligence (CQ) as an intercultural capability in cross-cultural communications that are virtual. This two-study research (study 1: n = 274; study 2: n = 223) conducted in call centers in the Philippines (a) assesses the generalizability of the four-factor CQ model (i.e., cognitive, metacognitive, motivational and behavioral CQ) as applied in the virtual context and (b) tests the relationship between CQ, personality dimensions (i.e., openness to experience and extraversion) and supervisor’s ratings of task performance. Study 1 results show that the structural validity of the four-factor CQ model was supported with minor issues in some ofthe items indicating the need to modify the CQ measure when utilized in the virtual context. Study 2 results show that CQ is positively and significantly related to openness to experience and extraversion. In addition, results show that CQ predicts task performance highlighting the importance of developing CQ among call center representatives and other working professionals who virtually engage and interact with clients and customers from culturally diverse backgrounds.

Impact of sport context and support on the use of a self-report measure for athlete monitoring

Athlete self-report measures (ASRM) are a popular method of athlete monitoring in high-performance sports. With increasing recognition and accessibility, ASRM may potentially be utilized by athletes from diverse sport contexts. The purpose of the present study was to improve understanding of ASRM implementation across different sport contexts by observing uptake and compliance of a newly implemented ASRM over 16 weeks, and investigating the perceived roles and factors influencing implementation. Athletes (n=131) completed an electronic survey at baseline and week 16 on their perceptions and experiences with ASRM implementation respectively. Despite initial interest, only 70 athletes attempted to use the ASRM. Of these athletes, team sport athletes who were supported by their coach or sports program to use the ASRM were most compliant (p < 0.001) with a mean compliance of 84 ± 21 %. Compliance for self-directed individual and team sport athletes was 28 ± 40 % and 8 ± 18 % respectively. Self-directed athletes were motivated to monitor themselves, and rated desired content and minimal burden as key factors for initial and ongoing compliance. Supported athletes were primarily motivated to comply for the benefit of their coach or sports program rather than themselves, however rated data output as a key factor for their continued use. Factors of the measure outweighed those of the social environment regardless of sport context, however the influence of social environmental factors should not be discounted. The findings of the present study demonstrate the impact of sport context on the implementation of an ASRM and the need to tailor implementation strategies accordingly. Key pointsAthletes perceive ASRM and the factors influencing implementation differently. Therefore, to encourage compliance, it is important to tailor implementation strategies to the athlete and their sport context to increase appeal and minimize unappealing factors.Athletes using an ASRM on their own accord typically favor a measure which meets their needs and interests, with minimal burden.Athletes using an ASRM under the direction and support of their coach or sports program typically favor feedback and a positive social environment.

Validity of wearable technology to measure peak impact during high-intensity treadmill running

The purpose of this study was to identify the validity of an upper-body mounted accelerometer to measure peak acceleration during high-intensity treadmill running. A twelve camera motion analysis (MA) system was used as the criterion measure with markers placed on and close to the accelerometer. Ten peak impacts per participant were compared (n = 390). All accelerometer values were significantly different between the MA unit and T6 reflective marker’s acceleration data. Smoothing accelerometer data at 8 and 6 Hz provides an acceptable indirect measure of peak impact acceleration performed during high-intensity running. Consequently, smoothing algorithms should be incorporated into the commercially available software that the devices are supplied with.