The effect of increased water prices on construction

The research aimed to investigate the effect an increase in water prices would have on construction. It was found that while there is a considerable amount of water embodied in construction the actual effect of a water tax on construction would be minimal unless implemented at the highest rate.

Attracting women to computing : a framework for evaluating intervention programmes

The lack of women in the computing industry in Australia, and in many western countries, is a problem that has been recognised by academics, the industry and governments. Over the last 20 years there have been many attempts to redress this gender imbalance via intervention programs aimed at increasing female participation in computing education and ultimately the computing profession. However statistics show no improvement in the rate of participation of females in this industry and anecdotal evidence suggests that these intervention programmes have not been as successful or effective as was anticipated. Evaluation could determine the effectiveness of such programmes yet only limited evaluations appear in the literature about intervention programmes established to encourage females in computing. This research sought to investigate how these types of intervention programmes should be evaluated.

Design and construction of a micropump for drug delivery applications

This paper presents design, construction, and evaluation of a micropump for drug delivery applications. The proposed micropump consists of three components: fluidics, electronics, and software. The fluidics component includes a silicone elastic diaphragm, a microservo, housing and two check valves. The diaphragm is modeled and simulated to establish its geometrical specifications. The housing is built using a rapid prototype machine. The electronics component consists of a microcontroller, a microswitch array, a simple display and a power unit. The software component is written in C and receives inputs from user, controls the microservo speed and displays the programmed speed. A number of experiments are conducted to evaluate the performance and capabilities of the micropump. The experiments focus on measurement of flow rate, dosage and duration of operation. A discussion of the performance and capabilities of the developed micropump is also given.

Improve construction knowledge management system by using the soft system methodology

The construction industry has a poor record in the management of its knowledge and results into huge wastage of resources and detrimental effect to quality. Research has shown that data and information management system plus knowledge management are a critical part of today's project management practice for construction projects. Few people will deny that 'quality information' and 'useful knowledge' are extremely important to any decision-making. However, the current processes of handling information and knowledge in the construction industry and increasingly costly. One of the major reasons is the nature of this industry is not conducive to good knowledge management and the traditional data/information systems used in the industry has long been critisized. It is very common that information is often duplicated, inconsistent and not current. In turn, making knowledge becomes difficult to manage properly. Project managers have in the past found it very difficult to source and analyse data in order to make sound decisions. This paper is part of a doctoral research project which summarizes three exploratory surveys; namely ERP system, Partnering strategy and Leadership impact of a knowledge management system in a construction company. Those findings are described by using the Soft Systems Methodology (SSM) which later becomes the basis for actions research. SSM is useful to reveal complexities of the knowledge management situations that occur in construction industry. The first stage was to conduct interviews of the different practices in knowledge and reporting process. Then, the SSM rich picture was developed to present the problematic areas including difficulties in inputting data to enable the knowledge platform in place. The research then develops root definition and CATWOE, and a conceptual model was formed. Interviewees were conducted with structured questions to identify prioritized actions and activities that can be undertaken to improve and manage the knowledge platform.

Exploring critical success factors for stakeholder management in construction projects

With a focus on different aspects of stakeholder management, various sets of critical success factors (CSFs) have been suggested in the literature. It is crucial to explore the relative importance and groupings of these factors. This paper aims to identify CSFs associated with stakeholder management in construction projects, and explore their ranking and underlying relationship. 15 CSFs were identified through a literature review, and consolidated by interviews and pilot studies with professionals in construction industry. A questionnaire instrument containing these 15 CSFs was sent out to project managers in Hong Kong, and 183 completed questionnaires were retrieved. The top three ranked factors for stakeholder management were "managing stakeholders with social responsibilities", "assessing the stakeholders' needs and constraints to the project", and "communicating with stakeholders properly and frequently". Using factor analysis and considering the high importance of the factor "managing stakeholders with social responsibilities", the 15 CSFs were grouped into five dimensions namely, precondition factor, stakeholder estimation, information inputs, decision making, and sustainable support. All these five groupings and their relationship were included in a framework for successful stakeholder management in construction projects. These findings help to clarify what the high prioritized factors are, and could also be used as an assessment tool to evaluate the performance of stakeholder management and thus help to identify areas for improvement.

Convergence among the sub-markets in Australian regional building and construction sector

Studies on market convergence are well considered in the literature. However, the majority of the previous research focused on housing markets and few studies have concentrated on construction markets. Owing to a simultaneously dramatic increase in the construction prices of the sub-markets in the building construction sector in Australia, this paper aims to identify the convergence among these markets, involving house construction market, other-residential building construction market, and non-residential building construction market. To achieve it the Granger causality test and generalized response function depending on the vector error correction model with the quarterly data of Australia’s eight states from 1998 to 2010 will be applied. Based upon the econometric tests, the price diffusion patterns among these construction markets have been identified. Research on the convergences of construction markets not only helps construction firms perform well in business operations and arbitrage activities, but also provides policy makers with useful information for enacting effective construction policies for national perspectives and approaches to infrastructure planning.

Technical features of BIM servers for collaboration on building and construction projects

This paper reviews the technical features and requirements of Building Information Modelling (BIM)-servers as collaboration platforms for multi-disciplinary building and construction projects. Multi-disciplinary collaboration is the norm in the Architecture, Engineering, and Construction (AEC) industries, especially in complex projects. The widespread adoption of object-oriented Computer-aided Design (CAD) tools that support BIM capabilities has generated greater interest in model based exchange of information across disciplines and consultants who have traditionally collaborated through the frequent exchange of 2D drawings and documents. BIM-servers are collaboration platforms that are expected to provide the technical capability to support this inter-disciplinary exchange of 3D models in addition to intelligent management of the related drawings, documents and other forms of data. Since BIM-servers are a recent technical development a review of their technical features can help further development. This paper serves this objective by providing a review of the technical features and requirements for using BIM-servers as multi-disciplinary collaboration platforms on building and construction projects. The methodologies include focus group interviews (FIGs) with representatives from the diverse AEC disciplines, a case study on a state-of-the-art BIM-server, and a critical review and analysis of current collaboration platforms that are available to the AEC industries. This paper concludes that greater emphasis should be placed on supporting technical requirements to facilitate technology management and implementation across disciplines. Their implications for user-centric technology development in design and construction industry are also discussed.

Part-time employment trends for full-time undergraduate property and construction students : results of a two year sequential investigation

This paper reports on the initial findings of an investigation into the experiences and part-time work practices of undergraduates enrolled in the Bachelor of Property and Construction (BPC) and combined degree courses at the University of Melbourne. Initial data was collected from final year students during 2001 and for all four years of the course in 2002. The results suggest that students in earlier years of the course are more likely to work in non-industry (casual) related employment and work fewer hours. Students in later years of the BPC course are more likely to work in jobs in the construction industry and also to work longer hours than those in earlier years. An analysis of final year students shows that the students employed by contracting organisations work significantly more hours than students employed by other types of organisations including architectural practices. The consequences of part-time semester employment on academic performance and students' well-being are considered and proposals are put forward as to how to better manage the industry experience-University relationship.

The international construction student: a missed opportunity?

Australian universities now have a more diverse undergraduate student population in construction degrees than at any other time in their history. The linguistic, ethnic and indigenous diversity of the Australian university student population has never been richer and this is reflected in construction classrooms. Wider participation rates of domestic students combined with the internationalisation and globalisation of higher education has resulted in a student population of identifiable sub-groups that were significantly under-represented or not represented at all in previous decades. This changing student cohort and the inherent pressures and challenges arising from this changing population is the subject of considerable discussion within the Australian tertiary sector. The extent to which Australian universities and the construction degree educators have responded to these pressures is under scrutiny. This paper argues that the climate, culture and curriculum of higher education within construction schools in Australia has not reflected this diversity and that rather than accommodate and embrace the effects of internationalisation Australian university construction schools may have missed a vital opportunity to be part of a global learning network.

Exploring the development and assessment of work-readiness using reflective practice in construction education.

It is well known that the construction industry is characterized by the need for practical knowledge and skill. However, this creates special challenges for universities in the development of work readiness in graduates. This research investigates the attitudes of students towards a course which was designed to develop work-readiness skills in construction management. The paper focuses on the distinctive issues associated with Work-Integrated Learning (WIL) using a formally assessed industry-mentored course of study. Past research shows that university degrees should promote reflective thinking since, in construction, it is necessary to make reflective judgements which deal with ill-defined problems. This is a generic capability that is needed by all graduates in knowledge-based occupations. The study utilized reflective practice to examine the perceptions of construction management students towards the development of attributes which were known to improve work skills. The students were asked to capture their reflections on their experiences in the form of reflective diaries, which were prepared weekly throughout the course. The results showed that the students expressed very positive views about their learning experiences. This occurred in spite of the challenges caused by the formal assessment processes that were undertaken as part of the course. This paper compares the student perceptions with the teachers’ reflections on the ability of traditional assessment methods to measure graduate attributes and work-readiness. The research explores the issues associated with assessing work-readiness skills in higher education. The findings suggest that student reflection is a necessary precondition to the development of effective work-readiness. In addition, the research concludes that more nontraditional assessment approaches are needed in construction programmes in order to develop the type of graduate required by the industry.

Implementation of enterprise resource planning (ERP) software in a major construction contracting organization in Hong Kong

Purpose – The purpose of this paper is to summarize the scope, methodology and main findings of a doctoral thesis about the implementation of enterprise resource planning (ERP) software in a major construction contracting organization in Hong Kong. This research is taken from a leadership and power and project management (PM) perspective.

Design/methodology/approach – The project adopted a case study approach in which the candidate was an employee/observer, who was embedded as a member of the business transformation team taking an action learning approach to study the ERP adoption. The research used the soft system methodology to identify gaps in the observed maturity level which exists in the organization. Data was gathered using public and private documentation, semi-structured interviews, observation and was validated through review of evidence with participants.

Findings – The results identified the importance of leadership and cultural issues in implementation of the business strategy. This research includes a contribution in two spheres: PM and construction procurement. The first implication for PM theory was to illustrate how knowledge has been efficiently managed within a construction organization by using information communication technology (ICT). It can be represented by the ladder of ICT>ERP>KM>PM. The second implication was to pave the way for the use of partnering strategies in PM practice. It can be represented by the ladder of National Culture>Organizational Culture>Leadership>Partnering Strategy>PM.

Practical implications – This model could be adapted to other large and complex organisational contexts. The research project also has implications as opening up a PM perspective on business transformation.

Originality/value – The contribution of this research is proving the success of adopting KM in a construction company by using an ERP system. The importance of culture in the traditionally collectivistic construction industry, and the issues senior management should take into account when formulating business strategies.

A systematic approach to risk management for construction

Systematic risk management is expecting the unexpected – it is a tool which helps control risks in construction projects. Its objective is to introduce a simple, practical method of identifying, assessing, monitoring and managing risk in an informed and structured way. It provides guidance for implementing a risk control strategy that is appropriate to control construction projects at all levels. This paper will review systematic management approaches to risk. It discusses the allocation of risk and suggests that risk needs to be identified and managed early in the procurement process. In addition, a case study of a small project that was affected by difficult economic circumstances is included to demonstrate the effectiveness of systematic risk management.

Effect of company size on occupational health and safety

It is mandatory in all Australian jurisdictions for construction companies to provide a safe working environment for their workers and sub-contractors. Consequently, occupational health and safety (OHS) is a major issue for construction companies mainly due to the fear of prosecution. The introduction of zero tolerance by the Victorian government “WorkCover Authority” in 1999 provided increased legislative OHS standards for the construction industry. This has placed an increased burden on construction companies especially small firms that are not in a position of financial strength. This research is based on benchmarking study of OHS performance of 44 construction companies in
Victoria, Australia. The results show that the size of the company is a major contributing factor to their OHS performance. Small companies employing less than 25 employees have comparatively low levels of OHS performance compared to larger firms. Company size is a limiting factor that impacts on the ability of small firms to implement comprehensive OHS plans. This research calls into question that notion that increasing legislative requirements will improve OHS outcomes.

Forecasting construction demand : a vector error correction model with dummy variables

Modelling the level of demand for construction is vital in policy formulation and implementation as the construction industry plays an important role in a country’s economic development process. In construction economics, research efforts on construction demand modelling and forecasting are various, but few researchers have considered the impact of global economy events in construction demand modelling. An advanced multivariate modelling technique, namely the vector error correction (VEC) model with dummy variables, was adopted to predict demand in the Australian construction market. The results of prediction accuracy tests suggest that the general VEC model and the VEC model with dummy variables are both acceptable for forecasting construction economic indicators. However, the VEC model that considers external impacts achieves higher prediction accuracy than the general VEC model. The model estimates indicate that the growth in population, changes in national income, fluctuations in interest rates and changes in householder expenditure all play significant roles when explaining variations in construction demand. The VEC model with disturbances developed can serve as an experimentation using an advanced econometrical method which can be used to analyse the effect of specific events or factors on the construction market growth.

Knowledge transfer : a model framework for construction knowledge integration

Managing information and knowledge in the construction industry is an important focus for research. The goal is to expedite better integration of construction knowledge amongst the stakeholders. Better use of this knowledge could allow the building industry to achieve quality outputs making best use of resources – the linked goals of time, cost and quality. Information networks and knowledge transfer are central to this and are recognized as integral to an industry strategy to improve productivity. However, poor delivery of information to those at the construction site and lack of effective methods of transferring knowledge between parties involved in construction become major challenges. Based on a critical review of literature and an interview survey, this paper identifies the information networks adopted in the Malaysian construction industry and models these using four knowledge transfer components classified as ‘control’, ‘innovation’, ‘best practice’ and ‘audit’ element. Knowledge integration practices - attitude, communication, skills, commitment and monitoring; and factors related to information barriers including accessibility, service delivery, information updates and publication, were identified as critical features for the success of knowledge integration in the Malaysian construction industry. A framework for knowledge transfer is proposed to promote better practices in the Malaysian construction industry.