Organisation change and its impact on Australian Building Societies' performance

The paper examines the relation between changing ownership structure and performance of Australian building societies. An analysis and discussion of the theories of organizational development and change is undertaken to explore the mutual building societies' motivation for change. The financial performance measures, provided by financial ratios of the major mutual building societies in Australia, are examined to assess the behaviour of building societies under different governance structures in the 1980s and 1990s. The theoretical and empirical literature has suggested that mutual deposit-taking institutions should have lov^^er profitability and higher operating expenses than their publicly listed counterparts. Accounting ratios are observed over time to investigate if governance change in mutual deposit-taking organizations accounted for any discernable differences in profitability and cost efficiency pre- and post- demutualization. The study finds support for the contention that demutualized building societies will have higher profitability and lower costs than their mutual counterparts. The study is confined to investigation of the six largest building societies that undertook the demutualization process. It could he extended to the entire building society sector. The results have implications for investors, managers and 'ovraers' of firms that retain their mutual structure, suggesting the demutualization vnû benefit these groups. There is no study that compares mutual deposit-taking institutions pre- and post-conversion in Australia.

Changing perception of average person's risk does not suffice to change perception of comparative risk

The direct method of assessing “unrealistic optimism” employs a question of the form, “Compared with the average person, what is the chance that event X will occur to you?” It has been proposed that when individuals construct their responses to this question (direct-estimates) they focus much more strongly on estimates of their own risk (self-estimates) than on estimates of the average person's risk (other-estimates). A challenge to this proposal comes from findings that interventions that alter other-estimates also change direct-estimates. Employing a novel intervention technique, we tested the possibility that such interventions may indirectly also change self-estimates and that this is what accounts for their effect on direct-estimates. Study 1 (n = 58) showed that an intervention which was designed to (and did) affect other-estimates also affected self-estimates, while Study 2 (n = 101) showed that it affected direct-estimates. Study 3 (n = 79) confirmed that we could modify the intervention so as to maintain the effect on other-estimates, but eliminate that on self-estimates. Study 4 (n = 112) demonstrated that when this was done, there was no longer any effect on direct-estimates. The findings are consistent with the proposal that direct-estimates are constructed largely just out of self-estimates. Implications for heath education programs are discussed.

The effect of active support training on engagement, opportunities for choice, challenging behaviour and support needs

Background: The aim of this study was to evaluate active support (AS) training and to investigate changes to perceived engagement in domestic tasks, opportunities for choice, frequency of challenging behaviour, and level of support needs.

Method: Participants were 12 adults with ID aged 27–57 years (M = 37 years) residing in three group homes, and their support workers. The support workers completed assessments on three occasions (at baseline, post-training, and at follow-up).

Results: Residents' engagement in domestic tasks increased over time, and overall choice increased, although perceived choice in two life domains initially increased, but decreased to baseline levels at follow-up. Residents exhibited an overall decrease in anxiety, self-absorbed behaviour, disruptive behaviour, and problem behaviour in general. There was also an overall decrease in perceived support needs for five activity domains, with no change for one domain.

Conclusions: The results contribute to a growing body of evidence demonstrating favourable outcomes of AS in terms of engagement and challenging behaviour in people with ID. Surprising results are presented for choice and perceived support needs, warranting further investigation.

Family physical activity and sedentary environments and weight change in children

Objective. To examine associations between family physical activity and sedentary environment and changes in body mass index (BMI) z-scores among 10-12-year-old children over three years.
Method. Design. Longitudinal (three-year follow-up). Subjects. In total, 152 boys and 192 girls aged 10-12 years at baseline.
Measurements. Measured height and weight at baseline and follow-up (weight status, BMI z-scores); aspects of the family physical activity and sedentary environment (parental and sibling modelling, reinforcement, social support, family-related barriers, rules/restrictions, home physical environment) measured with a questionnaire completed by parents at baseline.
Results. At baseline, 29.6% of boys and 21.9% of girls were overweight or obese, and mean (standard deviation, SD) BMI z-scores were 0.44 (0.99) and 0.28 (0.89), respectively. There was a significant change in BMI z-score among girls (mean change=0.19, SD=0.55, p<0.001), but not boys. Among boys, the number of items at home able to be used for sedentary behaviour (B=0.11, p=0.037) was associated with relatively greater increases in BMI z-score. Among girls, sibling engagement in physical activity at least three times/wk (B=-0.17, p=0.010) and the number of physical activity equipment items at home (B=-0.05, p=0.018) were associated with relatively greater decreases in BMI z-score.
Conclusion. Sibling physical activity and environmental stimuli for sedentary behaviours and physical activity within the home may be important targets for prevention of weight gain during the transition from childhood to adolescence.

Convergent interviewing : a qualitative diagnostic technique for researchers

Purpose – This paper aims to widen knowledge of and explore how convergent interviewing can be used to identify key issues within an organization.
Design/methodology/approach – This paper introduces the convergent interviewing technique and describes the method of selecting the interview subjects. The construction of a round of interviews is explained. The content of the interviews is described and the particular probing nature of the questions demanded by the convergent interview process is explained. The ways to analyze the full set of interviews for groupings or categories is also described. The case study example of a broad research question about influences on work behaviors in a local government council is used to illustrate the convergent interviewing technique.
Findings – The key issues revealed by using the technique can be subsequently used for a variety of research and consulting purposes and settings. Convergent interviewing is an effective research method, which conserves resources.
Originality/value – Convergent interviewing enables researchers to determine the most important and/or key issues within a population rather than a full list of issues in an organization or barriers to change in a particular organizational context.

Influence of helium atmospheric plasma treatment on surface and fracture-mechanical behaviour of quickstepTM cured bio-composites

This work investigated the potential of improving flexural properties of natural fiber (jute) reinforced biocomposites by atmospheric pressure helium plasma treatment. Composites were made by the use of combined hand lay-up and vacuum bagging technique followed by newly developed Australia patented Quickstep^TM curing. The physical properties of helium plasma modified fibers were investigated by means of wettability time, coefficient of friction (COF), atomic force microscopy (AFM) and chemical nature of the surface with ATR-FTIR and XPS. There was found a logical correlation between physical and chemical characteristics of the surface of fiber with the fracture mechanical behavior of their resulting biocomposites. In addition, the use of helium atmospheric plasma treatment prior to Quickstep^TM process has proved to be a potential way to positively alter the fracture-mechanical behavior of biocomposites. This study will lead to new commercial applications of natural fiber jute for the composite industry that go beyond wrapping and packaging.

Construction supply chain economic policy implementation for sectoral change : moving beyond the rhetoric

The improvement of the performance of the construction industry through the improved performance of the supply chains that make up the various sectors is a difficult task and one that has had considerable international debate (London, 2005). The idea of using the supply chain concept as a normative model to improve firm behaviour and thus ultimately industry performance through the development of supply chain clusters or integrated supply chains has been discussed in many public sector policy documents and in the academic research community since the late 1990s (London, 2005). However it has been difficult to see any real examples where this concept has had any major impact – or where the improvements have been measured and/or monitored.

The adaptive significance of ontogenetic colour change in a tropical python

Ontogenetic colour change is typically associated with changes in size, vulnerability or habitat, but assessment of its functional significance requires quantification of the colour signals from the receivers' perspective. The tropical python, Morelia viridis, is an ideal species to establish the functional significance of ontogenetic colour change. Neonates hatch either yellow or red and both the morphs change to green with age. Here, we show that colour change from red or yellow to green provides camouflage from visually oriented avian predators in the different habitats used by juveniles and adults. This reflects changes in foraging behaviour and vulnerability as individuals mature and provides a rare demonstration of the adaptive value of ontogenetic colour change.

Elastic behaviour in mechanical draw presses

This thesis explores the elastic behaviour of the mechanical double action press and draw die system commonly used to draw sheet metal components in the automotive industry. High process variability in production and excessive time spent in die try-out are significant problems in automotive stamping. It has previously been suggested that the elastic behaviour of the system may contribute to these problems. However, the mechanical principles that cause the press system to affect the forming process have not been documented in detail. Due to a poor understanding of these problems in industry, the elasticity of the press and tools is currently not considered during the die design. The aim of this work was to explore the physical principles of press system elasticity and determine the extent to which it contributes to problems in try-out and production. On the basis of this analysis methods were developed for controlling or accounting for problems during the design process. The application of frictional restraining force to the edges of the blank during forming depends on the distribution and magnitude of the clamping force between the binders surfaces of the draw die. This is an important control parameter for the deep drawing process. It has been demonstrated in this work that the elasticity of the press and draw die can affect clamping force in two ways. The response of the press system, to the forces produced in the press during forming, causes the magnitude of clamping force to change during the stroke. This was demonstrated using measured data from a production press. A simple linear elastic model of the press system was developed to illustrate a definite link between the measured force variation and the elasticity of the press and tools. The simple model was extended into a finite element model of the complete press system, which was used to control a forming simulation. It was demonstrated that stiffness variation within the system could influence the final strains in a drawn part. At the conclusion of this investigation a method is proposed for assessing the sensitivity of a part to clamping force variation in the press during die design. A means of reducing variation in the press through the addition of a simple linear spring element is also discussed. The second part of the work assessed the influence of tool structure on the distribution of frictional restraining forces to the blank. A forming simulation showed that tool stiffness affects the distribution of clamping pressure between the binders. This was also shown to affect the final strains in a drawn part. However, the most significant influence on restraining force was the tendency of the blank to increase in thickness between the binders during forming. Using a finite element approximation of the try-out process it was shown that the structure of the tool would also contribute to the problems currently experienced in try-out where uneven contact pressure distributions are addressed by manually adjusting the tool surfaces. Finally a generalised approach to designing draw die structures was developed. Simple analysis methods were combined with finite element based topology optimisation techniques to develop a set of basic design guidelines. The aim of the guidelines was to produce a structure with uniform stiffness response to a pressure applied at the binder surface. The work concludes with a recommendation for introducing the methods developed in this thesis into the standard production process.

Surface behaviour and lipid interaction of Alzheimer beta-amyloid peptide 1-42: a membrane-disrupting peptide

Amyloid aggregates, found in patients that suffer from Alzheimer's disease, are composed of fibril-forming peptides in a β-sheet conformation. One of the most abundant components in amyloid aggregates is the β-amyloid peptide 1–42 (Aβ 1–42). Membrane alterations may proceed to cell death by either an oxidative stress mechanism, caused by the peptide and synergized by transition metal ions, or through formation of ion channels by peptide interfacial self-aggregation. Here we demonstrate that Langmuir films of Aβ 1–42, either in pure form or mixed with lipids, develop stable monomolecular arrays with a high surface stability. By using micropipette aspiration technique and confocal microscopy we show that Aβ 1–42 induces a strong membrane destabilization in giant unilamellar vesicles composed of palmitoyloleoyl-phosphatidylcholine, sphingomyelin, and cholesterol, lowering the critical tension of vesicle rupture. Additionally, Aβ 1–42 triggers the induction of a sequential leakage of low- and high-molecular-weight markers trapped inside the giant unilamellar vesicles, but preserving the vesicle shape. Consequently, the Aβ 1–42 sequence confers particular molecular properties to the peptide that, in turn, influence supramolecular properties associated to membranes that may result in toxicity, including: 1), an ability of the peptide to strongly associate with the membrane; 2), a reduction of lateral membrane cohesive forces; and 3), a capacity to break the transbilayer gradient and puncture sealed vesicles.

Characterization of the moisture absorption and thermal ageing behaviour of polymeric composite systems using Raman spectroscopy

Advanced polymeric materials and their respective composites are fast becoming one of the world's most frequently used engineering materials. They find application in the manufacture of e.g. boat hulls, high performance motor vehicles, aircraft components and sports goods. Their high specific strength and specific stiffness give them the edge in applications where weight savings are critical, but their long-term durability is often questioned. These materials are susceptible to environmental conditions such as temperature and humidity. There is also a lack of relevant data, due to the long time-scales required for testing. In this study, the Raman technique has been used to monitor the degradation of two composite systems, namely: a rubber toughened vinylester material used in the marine industry and a high temperature bismaleimide/carbon fibre aerospace composite. Preliminary Raman studies show that the toughening rubber particles dispersed in the cured vinylester resin are leached out during hygrothermal ageing. The weight gain during ageing suggests that this leaching process occurs concurrently with the absorption of water molecules. An increase in the degree of cross-linking is observed when bismaleimide/carbon fibre composite is aged at high temperature. This cross- linking tendency decreases with increasing depth within the carbon fibre bundle.

Electrochemical behaviour of the pyrethroid insecticides

A systematic study is made of the electrochemical reduction and oxidation of eighteen pyrethroid insecticides and six model compounds. In addition the electrochemical oxidation of an insecticide synergist and the reduction of an insect repellent is studied. Oxidation and reduction mechanisms were partially or fully assigned for the the electrochemical reactions. The results indicate the presence of two oxidation sites common to the majority of pyrethroids. Specific sites of electrochemical reduction are observed for a number of pyrethroids. The electrochemical respones may be applied to the selective determination of a number pf pyrethroids synergists and repellents in commercial formulations without the requirement of pyrethroids, synergists and repellents in commerical formulations without the requirement for extensive sample preparation or the use of a separation technique.

Fracture behaviour of a rapidly cured polyethersulfone toughened carbon fibre/epoxy composite

An out-of-autoclave rapid heating/low pressure technique has been used to cure polyethersulfone (PES) toughened HexPly 8552. Mode I and mode II tests were conducted to evaluate the fracture toughness of the composites and the effectiveness of cure was determined through thermal analysis. When compared to the autoclave process, the out-of-autoclave process resulted in a 52% reduction in processing time, without any sacrifice to the matrix intrinsic properties. Thermal analysis indicated an 8 °C improvement in glass transition temperature (T_g) as a result of an increased degree of cure. The out-of-autoclave process did lack in the ability to facilitate the removal of porosity which affected the fracture toughness results. The porosity is believed to have increased the mode I propagation fracture toughness. However its effect on mode II was quite deleterious, shown by scanning electron microscopy (SEM). This study managed to identify a number of key parameters associated with the out-of-autoclave process essential for further optimisation.

Glass transition and free volume behaviour of poly(acrylonitrile)/LiCF3SO3 polymer-in-salt electrolytes compared to poly(ether urethane)/LiClO4 solid polymer electrolytes

Measurements of the glass transition temperature (T_g) and free volume behaviour of poly(acrylonitrile) (PAN) and PAN/lithium triflate (LiTf), with varying salt composition from 10 to 66 wt% LiTf, were made by positron annihilation lifetime spectroscopy (PALS). Addition of salt from 10 to 45 wt% LiTf resulted in an increase in the mean free volume cavity size at room temperature (r.t.) as measured by the orthoPositronium (oPs) pickoff lifetime, τ₃, with little change in relative concentration of free volume sites as measured by oPs pickoff intensity, I₃. The region from 45 to 66 wt% salt displayed no variation in relative free volume cavity size and concentration. This salt concentration range (45 wt%<[LiTf]<66 wt%) corresponds to a region of high ionic conductivity of order 10⁻⁵ to 10⁻⁶ S cm⁻¹ at T_g as measured by PALS. A percolation phenomenon is postulated to describe conduction in this composition region. Salt addition was shown to lower the T_g as measured by PALS; T_g was 115°C for PAN and 85°C for PAN/66 wt% LiTf. The T_g and free volume behaviour of this polymer-in-salt electrolyte (PISE) was compared to a poly(ether urethane)/LiClO₄ where the polymer is the major component, i.e. traditional solid polymer electrolyte (SPE). In contrast to the PISE, the T_g of the SPE was shown to increase with increasing salt concentration from 5.3 to 15.9 wt%. The relative free volume cavity size and concentration at r.t. were shown to decrease with increasing salt concentration. Ionic conductivity in this SPE was of order 10⁻⁵ S cm⁻¹ at r.t., which is over 60°C above T_g, 10⁻⁸ S cm⁻¹ at 25°C above T_g, and conductivity was not measurable at T_g.

Influence operations and behavioural change

The intended outcome of Information Operations appears to be a favourable change (to the instigator) in attitudes or belief systems of the target, however, the relationship between attitude and behaviour is tenuous. Propaganda and other methods of ‘influence’ are difficult to assess as the cause and effect relationship is complicated. The short term effects of psychological warfare where force is used in conjunction with influence techniques can be easily assessed; at least at a superficial level. Even in the latter case, the actual causes and effects could be solely the force used or some other factors rather than the psychological techniques per se. Influence Operations attempt to win the hearts and minds of the target audience but, even if successful, the lasting effects of a campaign are problematic. It is further complicated because if a person has a particular view, it does not mean that the ensuing behaviours will reflect that view. Also, there is evidence that the use of force on one set of people produces attitudes and behaviours that instigate radical beliefs and behaviours in another set. So psychological warfare techniques on one group that may or may not produce compliant behaviour stimulates another group to empathise with the victims thus producing an overall practical negative influence. Influence campaigns cannot be separated from the physical environment in which they are executed. If good politics requires good influence campaigns then good influence campaigns require good politics to back them up. This paper will examine the relationships between short term influence campaigns and compare them with the more long term socialising effects such as early education, family and physical attributes that have on attitudes and beliefs which result in the development of such behaviours as terrorism.