Survival, oxidative stability, and surface characteristics of spray dried co-microcapsules containing omega-3 fatty acids and probiotic bacteria

The objective of the study was to determine optimum inlet and outlet air temperatures of spray process for producing co-microcapsules containing omega-3 rich tuna oil and probiotic bacteria L. casei. These co-microcapsules were produced using whey protein isolate and gum Arabic complex coacervates as shell materials. Improved bacterial viability and oxidative stability of omega-3 oil were used as two main criteria of this study. Three sets of inlet (130°C, 150°C, and 170°C) and outlet (55°C, 65°C, and 75°C) air temperatures were used in nine combinations to produce powdered co-microcapsule. The viability of L. casei, oxidative stability of omega-3 oil, surface oil, oil microencapsulation efficiency, moisture content, surface elemental composition and morphology of the powdered samples were measured. There is no statistical difference in oxidative stability at two lower inlet air temperatures (130°C and 150°C). However, there was a significant decrease in oxidative stability when higher inlet temperature (170°C) was used. The viability of L. casei decreased with the increase in the inlet and outlet air temperatures. There was no difference in the surface elemental compositions and surface morphology of powdered co-microcapsules produced under these nine inlet/outlet temperature combinations. Of the range of conditions tested the co-microcapsules produced at inlet-outlet temperature 130–65°C showed the highest bacterial viability and oxidative stability of omega-3 and having the moisture content of 4.93 ± 0.05% (w/w). This research shows that powdered co-microcapsules of probiotic bacteria and omega-3 fatty acids with high survival of the former and high stability against oxidation can be produced through spray drying.

Physicochemical and functional properties of protein isolate produced from Australian chia seeds

Protein was isolated from Australian chia seeds and converted to powders using spray, freeze and vacuum drying methods, to investigate the effect of drying methods on physicochemical and functional attributes of chia-seed protein isolate (CPI). It was found that there was no significant difference in the proximate composition; however vacuum dried CPI (VDCPI) had the highest bulk density and oil absorption capacity, whereas spray dried powder (SDCPI) demonstrated the highest solubility, water absorption capacity and lowest surface hydrophobicity. Solubility of all powders was higher at elevated temperature and alkaline pH. Foaming capacity and foam stability of CPI were found to increase with increasing pH and protein concentration. SDCPI was the least denatured and VDCPI the most denatured, demonstrating the poorest solubility and foaming properties of the latter. These findings are expected to be useful in selection of a drying process to yield chia seed protein powders with more desirable functionality.

Microencapsulation of flaxseed oil in flaxseed protein and flaxseed gum complex coacervates

Flaxseed oil, a rich source of omega-3 fatty acids, was microencapsulated in a novel matrix formed by complex coacervation between flaxseed protein isolate (FPI) and flaxseed gum (FG). This matrix was crosslinking with glutaraldehyde. Liquid microcapsules with three core (oil)-to-wall ratios (1:2, 1:3 and 1:4) were prepared and spray-dried or freeze-dried to produce powders. The microencapsulation efficiency, surface oil, morphology and oxidative stability of these microcapsules were determined. The spray-dried solid microcapsules had higher oil microencapsulation efficiency, lower surface oil content, smoother surface morphology and higher oxidation stability than the freeze-dried microcapsules. The highest microencapsulation efficiency obtained in spray-dried microcapsules was 87% with a surface oil of 2.78% at core-to-wall ratio 1:4 and oil load 20%. The oxidation stability obtained from spray-dried microcapsules at core-to-wall ratio of 1:4 was nearly double that of the unencapsulated flaxseed oil.

Microencapsulation of omega-3 fatty acids: a review of microencapsulation and characterization methods

To improve consumption of omega-3 fatty acids, foods can be enriched with omega-3 rich oils. Microencapsulation of omega-3 oils minimizes oxidative deterioration and allows their use in stable and easy-to-handle form. Microencapsulation of omega-3 fatty acids can be achieved by using a variety of methods, with the two most commonly used commercial processes being complex coacervation and spray dried emulsions. A variety of other methods are in development including spray chilling, extrusion coating and liposome entrapment. The key parameter in any of these processes is the selection of wall material. For spray dried emulsions and complex coacervates protein or polysaccharides are primarily used as shell material, although complex coacervation is currently commercially limited to gelatin. Here we review the need for microencapsulation of omega-3 oils, methods of microencapsulation and analysis, and the selection of shell material components. In particular, we discuss the method of complex coacervation, including its benefits and limitations. This review highlights the need for research on the fundamentals of interfacial and complexation behaviour of various proteins, gums and polyphenols to encapsulate and deliver omega-3 fatty acids, particularly with regard to broadening the range of shell materials that can be used in complex coacervation of omega-3 rich oils.

Power ultrasound offers an environmentally friendly approach to cleaning dairy UF membranes

Flat sheet polymeric UF membranes of 30000 MWCO were obtained from Millipore Inc. Polypropylene spacers of a 50 mil (1.3 mm) thickness were obtained from KOCH membrane systems. A single 30 cm^sup 2^ membrane sheet was sandwiched with a spacer on the feed side of a cross flow Minitan S unit (Millipore Inc). The unit was immersed in a 50 kHz ultrasonic bath that was switched on as required. All experiments used re-constituted spray-dried whey powder to foul the membrane.

Tuning radical species in graphene oxide in aqueous solution by photoirradiation

Graphene oxide (GO) possesses unusual electronic and mechanical properties, including the ability to stabilize graphene radicals (GRs). However, controlled generation of GRs remains a challenge for applications requiring large-scale production. In this study, we demonstrate controlled production of GRs by UVB irradiation of GO solutions. Electron paramagnetic resonance spectroscopy of GO solutions revealed a dose-dependent exponential growth in radical production as a function of UVB exposure time. The GRs were air-stable over a long period, both in the solution state and in freeze-dried powders, suggesting they are graphene-based phenalenyl-like radicals. The redox activity of GRs was demonstrated by their ability to oxidize the chromophore 3,5,3?,5?- tetramethylbenzidine, with oxidation capacity of GO increasing with GR content.

Complex coacervation with whey protein isolate and gum arabic for the microencapsulation of omega-3 rich tuna oil.

Tuna oil rich in omega-3 fatty acids was microencapsulated in whey protein isolate (WPI)-gum arabic (GA) complex coacervates, and subsequently dried using spray and freeze drying to produce solid microcapsules. The oxidative stability, oil microencapsulation efficiency, surface oil and morphology of these solid microcapsules were determined. The complex coacervation process between WPI and GA was optimised in terms of pH, and WPI-to-GA ratio, using zeta potential, turbidity, and morphology of the microcapsules. The optimum pH and WPI-to-GA ratio for complex coacervation was found to be 3.75 and 3 : 1, respectively. The spray dried solid microcapsules had better stability against oxidation, higher oil microencapsulation efficiency and lower surface oil content compared to the freeze dried microcapsules. The surface of the spray dried microcapsules did not show microscopic pores while the surface of the freeze dried microcapsules was more porous. This study suggests that solid microcapsules of omega-3 rich oils can be produced using WPI-GA complex coacervates followed by spray drying and these microcapsules can be quite stable against oxidation. These microcapsules can have many potential applications in the functional food and nutraceuticals industry.

Investigation into the role of potentially contaminated feed as a source of the first-detected outbreaks of porcine epidemic diarrhea in Canada

In January 2014, approximately 9 months following the initial detection of porcine epidemic diarrhea (PED) in the USA, the first case of PED was confirmed in a swine herd in south-western Ontario. A follow-up epidemiological investigation carried out on the initial and 10 subsequent Ontario PED cases pointed to feed as a common risk factor. As a result, several lots of feed and spray-dried porcine plasma (SDPP) used as a feed supplement were tested for the presence of PEDV genome by real-time RT-PCR assay. Several of these tested positive, supporting the notion that contaminated feed may have been responsible for the introduction of PEDV into Canada. These findings led us to conduct a bioassay experiment in which three PEDV-positive SDPP samples (from a single lot) and two PEDV-positive feed samples supplemented with this SDPP were used to orally inoculate 3-week-old piglets. Although the feed-inoculated piglets did not show any significant excretion of PEDV, the SDPP-inoculated piglets shed PEDV at a relatively high level for ≥9 days. Despite the fact that the tested PEDV genome positive feed did not result in obvious piglet infection in our bioassay experiment, contaminated feed cannot be ruled out as a likely source of this introduction in the field where many other variables may play a contributing role.

Co-encapsulation and characterisation of omega-3 fatty acids and probiotic bacteria in whey protein isolate-gum Arabic complex coacervates

Omega-3 fatty acids and probiotic bacteria were co-encapsulated in a single whey protein isolate (WPI)-gum Arabic (GA) complex coacervate microcapsule. Tuna oil (O) and Lactobacillus casei 431 (P) were used as models of omega-3 and probiotic bacteria, respectively. The co-microcapsules (WPI-P-O-GA) and L.casei containing microcapsules (WPI-P-GA) were converted into powder by using spray and freeze drying. The viability of L.casei was significantly higher in WPI-P-O-GA co-microcapsules than in WPI-P-GA. The oxidative stability of tuna oil was significantly higher in spray dried co-capsules than in freeze dried ones.

Preparation and characterization of chia seed protein isolate-chia seed gum complex coacervates

Chia seed protein isolate (CPI) and chia seed gum (CSG) were extracted and complex coacervation between these two was studied. The pH and the CPI-to-CSG ratio were optimized to obtain the highest yield of complex coacervates underpinned by zeta potential and turbidity values. CPI-CSG complex coacervates were found to form primarily due to electrostatic interaction and remained stable within a pH range of 2.1-2.9 at ambient temperature. The optimum pH and CPI-to-CSG ratio for complex coacervation was found to be 2.7 and 6:1, respectively. Spray dried complex coacervate particles possessed smoother surface morphology compared to the freeze dried ones. CPI-CSG complex coacervates demonstrated better thermal stability as compared to that of individual CPI and CSG. The crosslinking of these complex coacervates by transglutaminase further improved their thermal stability. Therefore, the crosslinked CPI-CSG complex coacervates will be able to better protect the oxygen and heat sensitive food and pharmaceutical ingredients.

Survival and fermentation activity of probiotic bacteria and oxidative stability of omega-3 oil in co-microcapsules during storage

Tuna oil (O) and probiotic bacteria Lactobacillus casei (P) were co-microencapsulated in whey protein isolate (WPI)-gum Arabic (GA) complex coacervate. The co-microcapsules (WPI-P-O-GA), L. casei microcapsules (WPI-P-GA) and tuna oil microcapsules (WPI-O-GA) were converted into powder using spray and freeze drying. The interaction between probiotic bacteria and omega-3 oil in co-microcapsules, particularly in terms of oxidative stability of omega-3 oil and vitality/viability of probiotic bacteria and any synergistic outcome, was studied. The effect of storage temperature (5 and 25 °C) and time (90 days) on the survival and fermentation activity of L. casei and oxidative stability of tuna oil in the microcapsules/co-microcapsules was determined. A synergism between oxidative stability of omega-3 oil and vitality of probiotic bacteria was observed, when they were co-microencapsulated and spray dried. These co-microcapsules will likely have utility in functional food formulations due to simple and cost effective stabilisation and delivery of two important functional ingredients.

Positron annihilation lifetime spectroscopy of mechanically milled protein fibre powders and their free volume aspects

The present study reports the fabrication of ultra-fine powders from animal protein fibres such as cashmere guard hair, merino wool and eri silk along with their free volume aspects. The respectively mechanically cleaned, scoured and degummed cashmere guard hair, wool and silk fibres were converted into dry powders by a process sequence: Chopping, Attritor Milling, and Spray Drying. The fabricated protein fibre powders were characterised by scanning electron microscope, particle size distribution and positron annihilation lifetime spectroscopy (PALS). The PALS results indicated that the average free volume size in protein fibres increased on their wet mechanical milling with a decrease in the corresponding intensities leading to a resultant decrease in their fractional free volumes.

Preparation of Mg55Ni35Si10 amorphous powders by mechanical alloying and consolidation by vacuum hot pressing

Amorphous 55Mg35NilOSi alloy powder has been synthesized by mechanical alloying technique using pure Mg, Ni and Si elemental powders. The transformation of the crystalline powders into an amorphous one has been investigated by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and differential scanning calorimetry. The new material produced has a higher thermal stability than reported results, which is beneficial to the fabrication of Mg-Ni-Si bulk amorphous components through powder metallurgy.

Fatty acid and sterol composition of frozen and freeze-dried New Zealand green lipped mussel (Perna canaliculus) from three sites in New Zealand

In view of previously reported anti-inflammatory bioactivity of the New Zealand Green Lipped Mussel (NZGLM), the overall lipid profile and fatty acid and sterol composition of the NZGLM from various sites in New Zealand (Hallam Cove, Port Ligar, Little Nikau) were investigated using thin layer  chromatography (TLC) and gas liquid chromatography (GLC). Samples were either frozen (F) or freeze-dried (FD) soon after collection. It was also thought prior to the study, there may be differences in the dietary sources of phytoplankton between the sites, responsible for the bioactivity, however data collected in New Zealand reported no difference in the type of phytoplankton, but a difference in the quantity. There were no major significant differences in the major components of the lipid, fatty acid and sterol composition between FD or frozen samples, nor were there any significant differences in the major composition between sites. The only major difference was between total lipid composition of the freeze-dried and frozen samples due to the removal of water during freeze-drying. Total lipid content on a dry weight basis in FD samples was 8.4 g/100g tissue and was significantly higher than frozen samples (P < 0.05) and there was no significant site variation. The lipid class content between sites was also not significantly different as judged by TLC. Triglyceride (TG) lipid fraction appeared to be the most prominent in the frozen and FD samples. The free fatty acid (FFA) band was the next most prominent band and was visually more prominent in the frozen samples. Sterol esters (SE) were detected in higher amounts in the frozen samples compared with the FD samples. Phospholipid (PL) and sterols (ST) were distributed throughout all samples. Polyunsaturated fatty acids (PUFA) were the main group of fatty acids in both FD and frozen samples (45-46%), most of which were omega-3 (n-3) fatty acids (40-41%). Saturated fatty acids (SFA) accounted for approximately one quarter of total fatty acids, with little variation between FD and frozen samples. The major fatty acids of the NZGLM were docosahexaenoic acid (DHA; 22:6n-3) (19% in both FD and frozen samples), eicosapentaenoic acid (EPA; 20:5n-3) and palmitic acid (16:0) (15% in both FD and frozen samples). Cholesterol was the most prominent sterol (31% of total sterols). Other major sterols included desmosterol/ brassicasterol (co-eluting), 24-methylenecholesterol, trans-22-dehydrocholesterol, 24- nordehydrocholesterol and occelasterol. This study is unique as it compares the lipid composition of the NZGLM from three sites in New Zealand with the additional effect of processing. This is the second comparative study investigating the lipid, fatty acid and sterol composition of the NZGLM with added interest in the effect of freeze drying on the lipid content of the mussel. This study showed that there were no major significant differences in lipid, sterol and fatty acid composition between the FD and frozen samples of the NZGLM for three sites in New Zealand. Food chain studies and further research is warranted to investigate the presence and role of major and minor lipid.
components of the NZGLM.