A preliminary study on the volume reduction of pre-treatment sludge in seawater desalination by forward osmosis

Forward Osmosis (FO) can be applied to recover water from the pre-treatment sludge of seawater reverse osmosis process. This study investigated the effect of the concentration of two draw solutions (MgCl₂ and NaCl) in the reduction of Fe(OH)₃ sludge volume and the effect of cross flow velocity on flux through FO membrane. Higher the concentration of NaCl and MgCl₂ higher the water flux observed. However, the percentage increase was not significant due to the occurrence of internal concentration polarisation. MgCl₂ draws marginally increased water flux than NaCl, when the conditions of feed and draw solutions were similar. Increase in cross flow velocity (from 0.25 to 1.0 m/s) marginally changed the flux with both draw solutions as higher cross flow velocities were unproductive to beat the external CP effect along the membrane surface. However, at 1 m/s, highest fluxes were obtained for both draw solutions.

Understanding the effects of crevice and galvanic corrosion for seawater desalination plants management

 This research revealed the differences that occur when two forms of corrosion occur simultaneously in comparison to the individual corrosions, crevice and galvanic. It was shown that two forms of corrosion can actually reduce the amount of damage caused in selected conditions.

Mass balance for a novel RO/FO hybrid system in seawater desalination

Seawater Reverse Osmosis (SWRO) desalination is being used by several countries to aid the current demand for fresh water, hence numerous large scale and small scale desalination plants have been built during last decade. Despite major advancements in SWRO technology, the desalination industry is still facing significant practical issues. Two of the major issues are (1) generation of higher volumes of pre-treatment sludge, and (2) overall water recovery. This paper proposes a novel hybrid reverse osmosis (RO) - forward osmosis (FO) system to overcome the above two drawbacks. Mass balance calculations based on laboratory experiments have been used to predict increased water recovery and reduced pre-treatment sludge volume arising from large scale (340,000 m3/day of intake) and small scale (15,000 m3/day of intake) hybrid SWRO desalination plants. The percentage reduction of pre-treatment sludge volume, increase in overall RO water recovery, FO membrane area required and dilution in RO reject have been estimated.

Problems in seawater industrial desalination processes and potential sustainable solutions: a review

Seawater desalination has significantly developed towards membrane technology than phase change process during last decade. Seawater reverse osmosis (SWRO) in general is the most familiar process due to higher water recovery and lower energy consumption compared to other available desalination processes. Despite major advancements in SWRO technology, desalination industry is still facing significant amount of practical issues. Therefore, the potentials and problems faced by current SWRO industries and essential study areas are discussed in this review for the benefit of desalination industry. It is important to consider all the following five components in SWRO process i.e. (1) intake (2) pre-treatment (3) high pressure pumping (4) membrane separation (performance of membranes and brine disposal) and (5) product quality. Development of higher corrosion resistant piping materials or coating materials, valves, and pumps is believed to be in higher research demand. Furthermore, brine management, that includes brine disposal and resource recovery need further attention. Pre-treatment sludge management and reduced cleaning in place flush volume will reduce the capital costs associated with evaporation ponds and the maintenance costs associated with disposal and transportation reducing the unit cost of water. © 2013 Springer Science+Business Media Dordrecht.

Pretreatment of seawater for biodegradable organic content removal using membrane bioreactor

Reverse osmosis (RO) is currently one of the most prevalent methods used for seawater desalination. During the past four decades, the research anddevelopment has reduced the energy consumption from about 20 to 4 kWh/m3, while improvements in membrane science has led to a 20-fold increase in the specific membrane flux. Nevertheless, research is still underway to reduce the operation and maintenance problems and thus improve the performance of RO systems. The most important maintenance problem associated with RO operation is the membrane fouling, especially biological fouling (biofouling). This work focuses on the aspects to eliminate biofouling in RO membranes, by adopting a proper pretreatment system. The experimental results revealed that fluidized bed biological granular activated carbon, at 15 min empty bed contact time (with dissolved organic carbon, DOC concentration of 6–8 mg/L) can be utilized effectively to remove nearly 100% biodegradable DOC from seawater. Continuous experiments of membrane bioreactor (MBR) have been conducted concomitantly to gain insight into the long-term effects of MBR on biodegradable organic content removal and biofouling control. The results show that MBR system produced better effluent with 78% DOC removal and quasi-total biodegradable DOC removal. Dissolved oxygen was not a limiting factor for the DOC degradation. Short-term experimental runs were conducted with RO membrane using both pretreated and non-pretreated seawater. The results showed that filtrate from MBR yielded the highest permeate flux improvement, which was approximately 300% compared with non-pretreated seawater.

Effect of feed temperature and membrane orientation on pre-treatment sludge volume reduction through forward osmosis

This study focuses on volume reduction of pre-treatment sludge as well as on dilution of reverse osmosis (RO) concentrate through emerging forward osmosis (FO) technology where RO concentrate draws water from the pre-treatment sludge (feed solution) in order to reduce pre-treatment sludge volume and increase the RO water recovery. Experiments were carried out using two different types of sludge i.e. (1) synthetic pre-treatment sludge (Lab sludge) which has lower salinity and (2) actual sludge from Perth Seawater Desalination Plant, Australia (Perth Seawater Desalination Plant (PSDP) sludge) which has higher salinity. Effect of membrane orientation (FO and pressure-retarded osmosis (PRO) modes) and temperature of pre-treatment sludge on permeate water flux was investigated. There was a significant increase in water flux from 3.2 to 10.2 LMH (i.e. ~3 times higher) when temperature increased from 20 to 40°C for Lab sludge in PRO mode. However, there is no significant effect of temperature on water flux in FO mode for Lab sludge. On the contrary for PSPD sludge, there was no effect on water flux with increase in temperature at PRO mode. Dissolved ions in the porous side increased the severity of concentrative internal concentration polarization; hence, it could reduce the flux. There was no significant change in water flux when temperature increased from 20 to 40°C for PSDP sludge in FO mode. However, higher amount of water has permeated from Lab sludge compared to PSDP sludge in FO mode. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

Effects of high salinity from desalination brine on growth, photosynthesis, water relations and osmolyte concentrations of seagrass Posidonia australis

Highly saline brines from desalination plants expose seagrass communities to salt stress. We examined effects of raised salinity (46 and 54psu) compared with seawater controls (37psu) over 6weeks on the seagrass, Posidonia australis, growing in tanks with the aim of separating effects of salinity from other potentially deleterious components of brine and determining appropriate bioindicators. Plants survived exposures of 2-4weeks at 54psu, the maximum salinity of brine released from a nearby desalination plant. Salinity significantly reduced maximum quantum yield of PSII (chlorophyll a fluorescence emissions). Leaf water potential (Ψw) and osmotic potential (Ψπ) were more negative at increased salinity, while turgor pressure (Ψp) was unaffected. Leaf concentrations of K(+) and Ca(2+) decreased, whereas concentrations of sugars (mainly sucrose) and amino acids increased. We recommend leaf osmolarity, ion, sugar and amino acid concentrations as bioindicators for salinity effects, associated with brine released in desalination plant outfalls.

Identification and expression of natriuretic peptide receptor Type-A and-B mRNA in freshwater and seawater rainbow trout

Natriuretic peptide receptors mediate the physiological response of  natriuretic peptide hormones. One of the natriuretic peptide receptor types is the particulate guanylyl cyclase receptors, of which there are two identified: NPR-A and NPR-B. In fishes, these have been sequenced and characterized in eels, medaka, and dogfish shark (NPR-B only). The euryhaline rainbow trout provides an opportunity to further pursue examination of the system in teleosts. In this study, partial rainbow trout NPR-A-like and NPR-B-like mRNA sequences were identified via PCR and cloning. The sequence information was used in real-time PCR to examine mRNA expression in a variety of tissues of freshwater rainbow trout and rainbow trout acclimated to 35 parts per thousand seawater for a period of 10 days. In the excretory kidney and posterior intestine, real-time PCR analysis showed greater expression of NPR-B in freshwater fish than in those adapted to seawater; otherwise, there was no difference in the expression of the individual receptors in fresh water or seawater. In general, the expression of the NPR-A and NPR-B type receptors was quite low. These findings indicate that NPR-A and NPR-B mRNA expression is minimally altered under the experimental regime used in this study.

Electrosorption: an alternative option for desalination

Electrosorption is generally defined as adsorption on the surfaces of charged electrodes by applying potential or current. Electrosorption deionization method is a low-pressure non-membrane deionization process, with the potential to be a low energy cost alternative for desalination in the future. In this paper, the principle and mechanism of the electrosorption deionization method are discussed, the materials and properties of the electrode used in electrosorption process are summarized and the application and prospect of this promising desalination method are reviewed.

Natriuretic peptide signalling in the gills of freshwater and seawater fishes

The gills are considered major targets for cardiac natriuretic peptides with studies confirming natriuretic peptide receptor presence on vascular and sometimes epithelial tissues. Natriuretic peptide intracellular signalling is via guanylyl cyclase receptors and the cGMP pathway, and via inhibitory G-proteins linked to cyclic AMP pathways. Natriuretic peptides in the gills alter branchial blood flow and may also alter ion transport in various salinities. We present an overview of natriuretic peptide cGMP and cAMP signalling in fishes and consider the implications of the recent discovery of several CNPs and BNP in bony fishes on natriuretic peptide receptor studies.

The influence of geometry and wall character of pores on the permeation of ions and water through desalination membranes

The transport of water and ions across mimicked nanotube membranes with pseudo atoms is studied using molecular dynamics simulations under equilibrium conditions and hydrostatic pressure. Different pore surface properties are constructed by assigning partial charges on the sites of specified atoms to explore the influence of charges and polarity. The energetics of water and ion transports through the nanopores was calculated to evaluate their filterability to water. The simulation results show that the free energy barriers to water and ion conductions much depend on the charges at the pore entrance and the dipole within the pore. The membranes with hydrophobic pores and negatively charged entrances would be very efficient in the water transport and ion rejection. The charges and dipoles of the pore wall and the aligned dipoles of water molecules in the pore can create a significant force on ions.

Procedural justice and Australian environment : the case of the Wonthaggi water desalination plant

Drier conditions in Australia have compelled governments to implement various projects to address current or impending water shortages. Such projects have not always been popular with the local community who are directly affected by this infrastructure, with 'procedural justice' emerging as a critical issue. This paper analyses issues of public perceptions of 'procedural justice' in implementing environmental projects in regional areas, in the context of the recently approved desalination plant in the regional Victorian town of Wonthaggi. Drawing on both qualitative and quantitative data from a survey of 316 Wonthaggi residents, we show that one of the major predictors of residents' resistance toward accepting the building of the desalination plant was explained by perceptions of procedural injustice. We further argue that inadequate attention to the particular political history of the region has compounded the sense that the plant implementation has been unfair. Attention to such political histories is vital to avoiding conflict with local stakeholders and to the successful and ethical implementation of development projects in regional areas.