Life and death : metabolic rate, membrane composition, and life span of animals

Maximum life span differences among animal species exceed life span variation achieved by experimental manipulation by orders of magnitude. The differences in the characteristic maximum life span of species was initially proposed to be due to variation in mass-specific rate of metabolism. This is called the rate-of-living theory of aging and lies at the base of the oxidative-stress theory of aging, currently the most generally accepted explanation of aging. However, the rate-of-living theory of aging while helpful is not completely adequate in explaining the maximum life span. Recently, it has been discovered that the fatty acid composition of cell membranes varies systematically between species, and this underlies the variation in their metabolic rate. When combined with the fact that 1) the products of lipid peroxidation are powerful reactive molecular species, and 2) that fatty acids differ dramatically in their susceptibility to peroxidation, membrane fatty acid composition provides a mechanistic explanation of the variation in maximum life span among animal species. When the connection between metabolic rate and life span was first proposed a century ago, it was not known that membrane composition varies between species. Many of the exceptions to the rate-of-living theory appear explicable when the particular membrane fatty acid composition is considered for each case. Here we review the links between metabolic rate and maximum life span of mammals and birds as well as the linking role of membrane fatty acid composition in determining the maximum life span. The more limited information for ectothermic animals and treatments that extend life span (e.g., caloric restriction) are also reviewed.

Are most samples of animals systematically biased? Consistent individual trait differences bias samples despite random sampling

Sampling animals from the wild for study is something nearly every biologist has done, but despite our best efforts to obtain random samples of animals, ‘hidden’ trait biases may still exist. For example, consistent behavioral traits can affect trappability/catchability, independent of obvious factors such as size and gender, and these traits are often correlated with other repeatable physiological and/or life history traits. If so, systematic sampling bias may exist for any of these traits. The extent to which this is a problem, of course, depends on the magnitude of bias, which is presently unknown because the underlying trait distributions in populations are usually unknown, or unknowable. Indeed, our present knowledge about sampling bias comes from samples (not complete population censuses), which can possess bias to begin with. I had the unique opportunity to create naturalized populations of fish by seeding each of four small fishless lakes with equal densities of slow-, intermediate-, and fast-growing fish. Using sampling methods that are not size-selective, I observed that fast-growing fish were up to two-times more likely to be sampled than slower-growing fish. This indicates substantial and systematic bias with respect to an important life history trait (growth rate). If correlations between behavioral, physiological and life-history traits are as widespread as the literature suggests, then many animal samples may be systematically biased with respect to these traits (e.g., when collecting animals for laboratory use), and affect our inferences about population structure and abundance. I conclude with a discussion on ways to minimize sampling bias for particular physiological/behavioral/life-history types within animal populations.

Thermal conductivity of sand and its effect on the temperature of Loggerhead Sea Turtle (Caretta Caretta) nests

The conductivity of sand at a depth of 30–50 cm was measured at 15 sites on the beach at Captiva Island in south-west Florida which is used by nesting loggerhead turtles (Caretta caretta). The mean daily temperature of the sand was correlated with conductivity at the same depth measured the same day (r=0·611). When day to day variation was removed the correlation between nest temperature and conductivity increased to 0·694. The sand was highly variable in its grain structure. The dominant variability (80·6%) was redescribed by the first two principal components of a Principal Components Analysis (PCA). These two components were influenced mostly by percentages of large (> 1 mm) and small (< 500 μm) grains respectively. Conductivity was strongly correlated with the grain structure of the sand. The first three principal components describing sand grain structure, explained 84·1% of the variation in conductivity. Moisture content of the sand (always < 5%) was not an important factor. Sites dominated by larger grains generally had poorer conductivity and were cooler. Comparisons of eight nests to seven adjacent random sites revealed no strong evidence for directional selection in nest placement relative to sand conductivity. The variance in conductivities recorded at nests was also not significantly different from the variance at random sites.

Assessing the validity of tympanic temperature to predict core temperature of firefighters in different environmental conditions

The present study examined the validity of tympanic temperature measurements as a predictor of core temperature on the fireground in different environmental conditions. Fiftyone volunteer firefighters participated in the study across four different conditions, the conditions consisted of; 1) passive (i.e., no intervention) cooling in cold ambient temperatures (0-6°C); 2) cooling (through water immersion) in cool ambient temperatures (10-12ºC); 3) cooling (through water immersion) in warm ambient temperatures (21.5°C); and, 4) passive cooling in warm ambient temperatures (22°C). Firefighters wore full structural personal protective clothing while performing common firefighting duties including search and rescue tasks for 20-40 minutes. There was no difference between core and tympanic temperature immediately post-exercise across any condition. However, for all conditions, tympanic temperature dropped significantly faster than core temperature from 0 minutes, and remained significantly lower (p < 0.05) than core temperature from nine to 20 minutes post-training. The results show that there is no consistent difference between core and tympanic temperature during recovery from a simulated firefighting task across a range of different ambient conditions. Agencies should, accordingly, prioritize investigating other practical markers of core temperature as part of a broader heat stress management plan for firefighters.

Biotic effects of climate change in urban environments: The case of the grey-headed flying-fox (Pteropus poliocephalus) in Melbourne, Australia

Urban climates are known to differ from those of the surrounding rural areas, as human activities in cities lead to changes in temperature, humidity and wind regimes. These changes can in turn affect the geographic distribution of species, the behaviour of animals and the phenology of plants. The grey-headed flying-fox (Pteropus poliocephalus) is a large, nomadic bat from eastern Australia that roosts in large colonies known as camps. Historically a warm temperate to tropical species, P. poliocephalus recently established a year-round camp in the Royal Botanic Gardens Melbourne. Using a bioclimatic analysis, we demonstrated that on the basis of long-term data, Melbourne does not fall within the climatic range of other P. poliocephalus camp sites in Australia. Melbourne is drier than other summer camps, and cooler and drier than other winter camps. The city also receives less radiation, in winter and annually, than the other summer and winter camps of P. poliocephalus. However, we found that temperatures in central Melbourne have been increasing since the 1950s, leading to warmer conditions and a reduction in the number of frosts. In addition, artificial watering of parks and gardens in the city may contribute the equivalent of 590 mm (95% CI: 450–720 mm) of extra rainfall per year. It appears that human activities have increased temperatures and effective precipitation in central Melbourne, creating a more suitable climate for camps of the grey-headed flying-fox. As demonstrated by this example, anthropogenic climate change is likely to complicate further the task of conserving biological diversity in urban environments.

Dietary manipulation of muscle long-chain omega-3 and omega-6 fatty acids and sensory properties of lamb meat

The effects of dietary manipulation of muscle long-chain omega-3 fatty acids (FA) on sensory properties of cooked meat in second cross ([Merino×Border Leicester]×Poll Dorset) wether lambs were evaluated. Lambs fed dietary supplements of fish meal (FM, Exp. 1) and fish oil (FO, Exp. 2) showed moderately (P<0.01) and markedly (P<0.001) increased muscle long-chain omega-3 FA content compared with those fed the basal diet of lucerne chaff and oat chaff. Protected canola seed (PCS, Exp. 1) significantly (P<0.001) increased omega-6 FA content of the longissimus muscle. In each of the 2 experiments (1 and 2), after being fed experimental diets for 6 weeks lambs were slaughtered at a commercial abattoir. At 24 h post-mortem (PM) the semitendinosus and biceps femoris muscles were removed from animals and stored at −20°C until evaluation of sensory properties using experienced panel members. The muscle samples were stored for 3 (Exp. 1) and 12 (Exp. 2) months then removed, thawed and cooked for sensory evaluation. The meat samples were cooked under standardized conditions in a convection microwave at 180°C (20–25 min) to an internal temperature of 75°C. Cooked samples were tested for flavour, aroma, juiciness and overall palatability. The significant increase in muscle long-chain omega-3 with FM (Exp. 1 and 2) and FO (Exp. 2) or omega-6 FA with PCS (Exp. 1) were not detrimental to sensory panel evaluations of flavour or aroma of cooked meat when compared with the basal diet. However, meat from FM (Exp. 1) had lower juiciness and FO (Exp. 2) had lower overall palatability. Protected sunflower meal protein with FO (Exp. 2) significantly lowered ratings for flavour, juiciness and overall palatability. Lamb meat with increased levels of long-chain omega-3 FA can be produced without altering the sensory quality (flavour or aroma) of the cooked meat.

Temperature-dependent sex determination of Ascension Island green turtles

We examined the role played by temperature in the duration of incubation and sex ratio of green turtle hatchlings at Ascension Island, one of the most important green turtle rookeries in the Atlantic. Temperature at control sites at nest depth and in 39 green turtle nests was measured using small temperature recording devices. The sex ratio of hatchlings was ascertained in a sub-sample of monitored nests allowing the description of the relationship between intranest temperature and hatchling sex ratio, demonstrating a pivotal incubation temperature of 28.8°C. The seasonal profile in sex ratio of hatchlings produced on all nesting beaches at Ascension Island was estimated, showing that a female-biased sex ratio would be expected with a female:male ratio of the order of 3:1. The use of nest temperature, air temperature, sand temperature at control sites, and incubation duration as proxies to estimate hatchling sex ratio are discussed.

Convergent evolution in locomotory patterns of flying and swimming animals

Locomotion is one of the major energetic costs faced by animals and various strategies have evolved to reduce its cost. Birds use interspersed periods of flapping and gliding to reduce the mechanical requirements of level flight while undergoing cyclical changes in flight altitude, known as undulating flight. Here we equipped free-ranging marine vertebrates with accelerometers and demonstrate that gait patterns resembling undulating flight occur in four marine vertebrate species comprising sharks and pinnipeds. Both sharks and pinnipeds display intermittent gliding interspersed with powered locomotion. We suggest, that the convergent use of similar gait patterns by distinct groups of animals points to universal physical and physiological principles that operate beyond taxonomic limits and shape common solutions to increase energetic efficiency. Energetically expensive large-scale migrations performed by many vertebrates provide common selection pressure for efficient locomotion, with potential for the convergence of locomotory strategies by a wide variety of species.

Establishment of temperature control scheme for microbioreactor operation using integrated microheater

This paper presents design and fabrication of a microbioreactor platform, and implementation of two temperature control methods (i.e. on-off and PID) and their performance evaluation on the microbioreactor platform (working volume ~300 μL). The temperature of the microbioreactor content is controlled by using a subminiature heater placed underneath the microbioreactor and is measured with a miniature Pt 100 sensor. The microbioreactor is also integrated with a magnetic stirring capacity and a water evaporation control scheme. Programs for the two temperature control methods are written in LabVIEW software and implemented by interfacing them with a data acquisition card. It is shown that by implementing on–off and PID temperature control methods, the temperature of the microbioreactor content can be tightly controlled with an accuracy of approximately ±0.5 °C of the set point values. Both control methods also provide a good response and settling time values (i.e. around 2 min). Contrary to the on/off control method, the PID control method requires no adjustments whenever the set-point values are modified. The PID temperature control method works well for the entire tested range.

Effect of feed temperature and membrane orientation on pre-treatment sludge volume reduction through forward osmosis

This study focuses on volume reduction of pre-treatment sludge as well as on dilution of reverse osmosis (RO) concentrate through emerging forward osmosis (FO) technology where RO concentrate draws water from the pre-treatment sludge (feed solution) in order to reduce pre-treatment sludge volume and increase the RO water recovery. Experiments were carried out using two different types of sludge i.e. (1) synthetic pre-treatment sludge (Lab sludge) which has lower salinity and (2) actual sludge from Perth Seawater Desalination Plant, Australia (Perth Seawater Desalination Plant (PSDP) sludge) which has higher salinity. Effect of membrane orientation (FO and pressure-retarded osmosis (PRO) modes) and temperature of pre-treatment sludge on permeate water flux was investigated. There was a significant increase in water flux from 3.2 to 10.2 LMH (i.e. ~3 times higher) when temperature increased from 20 to 40°C for Lab sludge in PRO mode. However, there is no significant effect of temperature on water flux in FO mode for Lab sludge. On the contrary for PSPD sludge, there was no effect on water flux with increase in temperature at PRO mode. Dissolved ions in the porous side increased the severity of concentrative internal concentration polarization; hence, it could reduce the flux. There was no significant change in water flux when temperature increased from 20 to 40°C for PSDP sludge in FO mode. However, higher amount of water has permeated from Lab sludge compared to PSDP sludge in FO mode. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

Utility of biological sensor tags in animal conservation

Electronic tags (both biotelemetry and biologging platforms) have informed conservation and resource management policy and practice by providing vital information on the spatial ecology of animals and their environments. However, the extent of the contribution of biological sensors (within electronic tags) that measure an animal's state (e.g., heart rate, body temperature, and details of locomotion and energetics) is less clear. A literature review revealed that, despite a growing number of commercially available state sensor tags and enormous application potential for such devices in animal biology, there are relatively few examples of their application to conservation. Existing applications fell under 4 main themes: quantifying disturbance (e.g., ecotourism, vehicular and aircraft traffic), examining the effects of environmental change (e.g., climate change), understanding the consequences of habitat use and selection, and estimating energy expenditure. We also identified several other ways in which sensor tags could benefit conservation, such as determining the potential efficacy of management interventions. With increasing sensor diversity of commercially available platforms, less invasive attachment techniques, smaller device sizes, and more researchers embracing such technology, we suggest that biological sensor tags be considered a part of the necessary toolbox for conservation. This approach can measure (in real time) the state of free-ranging animals and thus provide managers with objective, timely, relevant, and accurate data to inform policy and decision making.

Low-temperature compaction of Ti-6Al-4V powder using equal channel angular extrusion with back pressure

Equal channel angular extrusion (ECAE), with simultaneous application of back pressure, has been applied to the consolidation of 10 mm diameter billets of pre-alloyed, hydride-dehydride Ti-6Al-4V powder at temperatures ≤400 °C. The upper limit to processing temperature was chosen to minimise the potential for contamination with gaseous constituents potentially harmful to properties of consolidated product. It has been demonstrated that the application of ECAE with imposed hydrostatic pressure permits consolidation to in excess of 96% relative density at temperatures in the range 100-400 °C, and in excess of 98% at 400 °C with applied back pressure ≥175 MPa. ECAE compaction at 20 °C (back pressure = 262 MPa) produced billet with 95.6% relative density, but minimal green strength. At an extrusion temperature of 400 °C, the relative density increased to 98.3%, for similar processing conditions, and the green strength increased to a maximum 750 MPa. The relative density of compacts produced at 400 °C increased from 96.8 to 98.6% with increase in applied back pressure from 20 to 480 MPa, while Vickers hardness increased from 360 to 412 HV. The key to the effective low-temperature compaction achieved is the severe shear deformation experienced during ECAE, combined with the superimposed hydrostatic pressure.

Effects of 22ᵒc muscle temperature on voluntary and evoked muscle properties during and after high intensity exercise

The purpose of this study was to investigate the effect of 22 °C local muscle temperature of intact human plantar flexors performing fatiguing contractions on evoked and voluntary contractile properties before and after fatigue. Twelve subjects were tested on plantar flexor voluntary torque, percent muscle activation derived from twitch interpolation, integrated electromyographic (iEMG) activity, and evoked torque and temporal characteristics of maximal twitch and tetanic stimulations before fatigue and 1, 5, and 10 min after intermittent, high-intensity, isometric fatigue under both normothermic and hypothermic conditions. Hypothermic and normothermic changes between time points were analysed by repeated-measures analysis of variance. Normothermic fatigue induced small to large effects (Cohen’s d: 0.29–3.06) on voluntary and evoked contractile properties, whereas most effects of unfatigued hypothermia were limited to rate-dependent processes (Cohen’s d: 0.78–1.70). Most tetanic properties were potentiated 1 min after normothermic fatigue, but remained unchanged by hypothermic fatigue, resulting in significant differences between the two conditions. Soleus iEMG significantly declined 1 min after normothermic fatigue (–29%), but not after hypothermic fatigue. Twitch torque was potentiated by 29% one minute after fatigue while normothermic, but was potentiated by 46% while hypothermic; rate of twitch torque development and time to peak twitch were potentiated by 39% and 10% while normothermic, but 89% and 28% while hypothermic. Although voluntary contractile properties are generally impaired soon after normothermic fatigue, most were not after hypothermic fatigue. Furthermore, evoked contractile properties were generally higher 1 min after hypothermic fatigue. We conclude that the hypothermic condition slows the recovery of potentiated evoked contractile properties back to baseline values.

Structural transformation of polyacrylonitrile fibers during stabilization and low temperature carbonization

The effect of oxidative stabilization and carbonization processes on the structure, mass and mechanical properties of polyacrylonitrile (PAN) precursor fibers was analyzed. A gradual densification of the fibers occurring from mass loss, decrease in fiber diameter and increase in density were observed after stabilization at a maximum temperature of 255 °C and carbonization at a maximum temperature of 800 °C. The tensile strength and modulus of the fibers were found to decrease after stabilization but then increased after low temperature carbonization. The thermal processing of the precursor fibers affected their mode of failure after tensile loading, changing from a ductile type of failure to a brittle type. The type of failure correlated well with the crystal structure changes in the fibers. Whilst the PAN precursor fiber started to exotherm above 225 °C in air, no prominent exothermic reaction was measured in the carbonized fibers in air up to 430 °C. The aromatization index of stabilized fiber was calculated to be ∼66%, and that of carbonized fiber was ∼99%. FTIR studies indicated that the variation in the chemical structure of the fibers with the stabilization of the fibers. Radial heterogeneity in the stabilized fibers was observed however it was not promoted to the carbonized fibers. Finally, a method to calculate mass retention of PAN precursor fiber after heat treatment was developed, and the calculated percentage mass retained of the precursor fiber after oxidation and carbonization were found to be 81% and 51%, respectively. . This study proposes an effective method to calculate the percentage of mass retained by precursor fibers after stabilization and low temperature carbonization to provide a model for evaluating carbon fiber yield from a given amount of fibers.