Improvement of coating durability, interfacial adhesion and compressive strength of UHMWPE fiber/epoxy composites through plasma pre-treatment and polypyrrole coating

Ultra-high-molecular-weight polyethylene (UHMWPE) fibers have exceptionally higher specific strength and stiffness compared with other high-performance fibers. However, the interfacial adhesion and compressive performance of UHMWPE fiber-reinforced polymer composites (FPCs) are extremely low. The challenges are to achieve load transfer at the interface between the fiber and matrix at a molecular level. Here, we show that plasma pre-treatment of UHMWPE fibers followed by coating with polypyrrole (PPy) results in an 848% improvement in the interfacial adhesion and 54% enhancement in compressive performance. This method takes advantage of a toughening mechanism observed in spider silk and collagen, which the hydrogen bond power the load transfer. The results showed that these improvements of interfacial adhesion and compressive strength were attributed to hydrogen-bonding interactions between the plasma pre-treated UHMWPE and PPy, which improves the fiber-matrix-fiber load transfer process. In addition, the hydrogen-bonded PPy coatings also endowed durability electrical conductivity properties of the UHMWPE fiber.

Influence of aging pre-treatment on the compressive deformation of WE54 alloy

The effect of aging pre-treatment on the compressive deformation of a commercial WE54 alloy is studied. Age hardening treatments were performed at 170 °C, 250 °C and 300 °C. Compression testing was then carried out for the peak aged samples at temperatures between ambient and 450 °C. Twinning dominated the deformation at lower temperatures for all initial microstructures. This behaviour was replaced by slip dominated flow when the temperature was raised. The temperature of the transition from twinning to slip dominated flow was only mildly sensitive to the pre-treatment. It is also evident that dynamic recrystallization is retarded in this alloy.

Effect of weight reduction pre-treatment on the electrical and thermal properties of polypyrrole coated woven polyester fabrics

Weight reduction increased the amount of deposited polypyrrole (PPy) on the polyester (PET) fiber surface, leading to a considerable decrease in electrical resistance and improved heat generation capacity for the PPy coated PET fabrics. Application of dc voltages to an insulated roll of PPy-coated fabric increased the temperature to about 90 °C. This showed the suitability of these fabrics for heating applications. The optimum PPy deposition of about 2.8% was obtained in samples weight reduced by aqueous sodium hydroxide treatment. AFM images revealed a smooth surface morphology of the untreated fiber whereas the treated fiber had a high surface roughness.

Ranking of pre-treatment technologies for reverse osmosis for water recovery

Agro-industries are a life-line for sustainable future of human kind. However, the wastewater generated by agro-industries poses direct threat to the same sustainable future by polluting the freshwater sources when discharged into those freshwater sources. Thus, we need both advanced treatment technologies to treat those wastewater streams generated and better reuse practices for the treated effluents. Reverse osmosis (RO) is one of the advanced treatments to treat dissolved solids that are present in agricultural wastewater streams. But, RO is very sensitive to suspended solids (SS) present in the wastewater streams. Those SS can foul the RO membrane and make it ineffective in producing treated effluent at desired rates. Therefore, suitable pre-treatment scheme is necessary to treat the agro-wastewater streams before passing through RO. This study focuses on the qualitative and quantitative ranking of the available conventional and modern pre-treatment technologies as pre-treatment for RO. This study considers wastewater that has been treated through a secondary treatment system for example activated sludge process as the target water that needs pre-treatment. Based on qualitative ranking of conventional pre-treatment options, the Lime clarification/Granular Media filtration (GMF) option is ranked as the best; whereas finescreens/ micro-screens option ranked as the least preferred option based on the scores they attained in treating the water quality parameters that are considered essential. Based on the quantitative ranking, the low pressure membrane technology such as ultra-filtration (UF) stood first and microfiltration (MF) stood last.

A preliminary study on the volume reduction of pre-treatment sludge in seawater desalination by forward osmosis

Forward Osmosis (FO) can be applied to recover water from the pre-treatment sludge of seawater reverse osmosis process. This study investigated the effect of the concentration of two draw solutions (MgCl₂ and NaCl) in the reduction of Fe(OH)₃ sludge volume and the effect of cross flow velocity on flux through FO membrane. Higher the concentration of NaCl and MgCl₂ higher the water flux observed. However, the percentage increase was not significant due to the occurrence of internal concentration polarisation. MgCl₂ draws marginally increased water flux than NaCl, when the conditions of feed and draw solutions were similar. Increase in cross flow velocity (from 0.25 to 1.0 m/s) marginally changed the flux with both draw solutions as higher cross flow velocities were unproductive to beat the external CP effect along the membrane surface. However, at 1 m/s, highest fluxes were obtained for both draw solutions.

Effect of feed temperature and membrane orientation on pre-treatment sludge volume reduction through forward osmosis

This study focuses on volume reduction of pre-treatment sludge as well as on dilution of reverse osmosis (RO) concentrate through emerging forward osmosis (FO) technology where RO concentrate draws water from the pre-treatment sludge (feed solution) in order to reduce pre-treatment sludge volume and increase the RO water recovery. Experiments were carried out using two different types of sludge i.e. (1) synthetic pre-treatment sludge (Lab sludge) which has lower salinity and (2) actual sludge from Perth Seawater Desalination Plant, Australia (Perth Seawater Desalination Plant (PSDP) sludge) which has higher salinity. Effect of membrane orientation (FO and pressure-retarded osmosis (PRO) modes) and temperature of pre-treatment sludge on permeate water flux was investigated. There was a significant increase in water flux from 3.2 to 10.2 LMH (i.e. ~3 times higher) when temperature increased from 20 to 40°C for Lab sludge in PRO mode. However, there is no significant effect of temperature on water flux in FO mode for Lab sludge. On the contrary for PSPD sludge, there was no effect on water flux with increase in temperature at PRO mode. Dissolved ions in the porous side increased the severity of concentrative internal concentration polarization; hence, it could reduce the flux. There was no significant change in water flux when temperature increased from 20 to 40°C for PSDP sludge in FO mode. However, higher amount of water has permeated from Lab sludge compared to PSDP sludge in FO mode. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

Investigation of chitosan adsorption onto cotton fabric with atmospheric helium/oxygen plasma pre-treatment

In this study, the effects of helium or a helium/oxygen mixture atmospheric pressure plasma treatment on the adsorption of chitosan onto the cotton fabric were investigated. Fabrics were treated with plasma prior to a chitosan finishing process, whereby fabrics were surface coated using a pad/dry/cure method. Fourier transform infrared spectroscopy, scanning electron microscopy, X-ray photoelectron spectroscopy, surface energy analyser and contact angle measurements were used to investigate the changes on the cotton surface. Furthermore, antimicrobial activity of the cotton fabric was evaluated. The results showed that plasma pre-treatment enhanced the chitosan adsorption to the cotton surface through physical bonding and there was weak evidence of chemical bonding interactions. A combination of plasma and chitosan treatment did not show any significant differences on the antimicrobial properties compared to chitosan only treated fabric. Plasma treatment changed the fibres physically and enhanced the surface energy and thickness of chitosan distributed on the fibres.

Effect of cold plasma pre-treatment on photocatalytic activity of 3D fabric loaded with nano-photocatalysts: response surface methodology

In this study, the physico-chemical effects occasioned by the cold plasma discharge (CPD) on the photo-decolorization of Reactive Orange 16 (RO16) by 3D fabrics (spacer fabrics) loaded with ZnO:TiO2 nano-photocatalysts (nphs) were optimized via response surface methodology (RSM). CPD was employed to improve the surface characteristics of the spacer fabrics for nphs loading. Surface morphology and color variation were studied utilizing scanning electron microscopy (SEM) and CIE-Lab system, respectively. The effect of CPD on the wetting ability of the spacer fabrics was examined using dynamic adsorption measurement (DAM). Also, X-ray fluorescence (XRF) was utilized to investigate the durability of the nphs on the spacer fabrics. All the experiments were implemented in a Box-Behnken design (BBD) with three independent variables (CPD treatment time, dye concentration and irradiation time) in order to optimize the decolorization of RO16. The anticipated values of the decolorization efficiency were found to be in excellent agreement with the experimental values (R2 = 0.9996, Adjusted R2 = 0.9992). The kinetic analysis demonstrated that the photocatalytic decolorization followed the Langmuir-Hinshelwood kinetic model. In conclusion, this heterogeneous photocatalytic process is capable of decolorizing and mineralizing azoic reactive dye in textile wastewater. Moreover, the results confirmed that RSM based on the BBD was a suitable method to optimize the operating conditions of RO16 degradation.

Anaerobic treatment of juice and fruit-processing effluents

Effluents from the juice and fruit processing industries have high organic matter content. Discharge of these effluents without appropriate treatment would therefore have a negative impact on the environment. High organic contents and low contamination levels make such effluents suitable for biological treatment, especially anaerobic digestion. In the latter process, significant amounts of digester gas can be produced, turning a waste stream into a source of renewable energy that can be used for electricity and heat production, leading to financial benefits.This paper investigates the feasibility of anaerobic digestion and the gas generation potential of five different effluents from the carrot-juice, orange-juice and sultana processing industries. Benefits are assessed in terms of digester gas production and organic matter reduction. The results show that the specific gas production ranges between 665 and 860 m3 per tonne of effluent treated (as organic dry matter). Furthermore, nearly 100% of the organic matter is converted into gas in the case of the carrot- and orange-juice processing residues, while a 84.5% reduction of the organic matter was found to be achievable in the case of the sultana wastes. While these results are promising, further testing will be required to validate them in a larger scale.

Additive effect of interferential therapyover pelvic floor exercise alone in the treatment of female urinary stress and urge incontinence: A randomized controlled trial

This pilot study attempted to examine the additional efficacy of interferential therapy in reducing the symptoms of urinary stress and urge incontinence. Twenty-four subjects were randomly allocated to the experimental group, which received interferential therapy plus pelvic floor exercises, or the control group, which received pelvic floor exercises only. Treatment was given three times a week for 4 weeks. Subjects were given urinary diaries to record urinary symptoms (including frequency of passing urine and number of times woken by desire to pass urine) for 5 days prior to and after treatment. Perineometer readings, pad weighing test and start/stop test were also performed in a physiotherapy clinic before and at completion of treatment regimes. Significant improvements were observed in all the outcome variables in the experimental group, but in only the perineometer readings in controls. When the changes from pre- to post-treatment were compared between the two groups, four of the dependent variables did not reach statistical significance. Power analysis indicated that the sample size for each group needed to be 70 for all results to be statistically significant. This study shows that interferential therapy plus pelvic floor exercise appears to be a more effective treatment modality than pelvic floor muscle strengthening exercise alone for incontinence, but a larger trial with longer followup is needed before definitive conclusions can be reached.

'Green' treatment of acid mine drainage - a step towards sustainability

Sustainability is becoming increasingly important in the mining and mineral processing industries and must incorporate the associated waste products. Acid mine drainage (AMD) is one such by-product and is one of the most serious environmental problems facing the minerals industry today. The oxidation of sulphidic mine wastes often continues for a substantial period of time after mine closure, resulting in difficult and costly remediation and rehabilitation works. Mining companies are often reluctant to spend increasing amounts of money on waste treatment when the mine life is limited or even finished. Hence a simple, low maintenance and low-cost method of treating AMD is required. Whilst this paper does not address the issue of AMD, it does propose methods for removal of individual species from AMD with potential benefits, including raising AMD pH.

A novel concept of using biosolids as a biological adsorbent, or ‘biosorbent’, of metals from AMD is being investigated at a laboratory/pilot scale level. Biosolids are a by-product resulting from the biological treatment of wastewater, and have been previously shown to adsorb metals from aqueous solutions. This could lead to an environmentally sustainable or ‘green’ method for treating both AMD discharges and disposing/reusing the biosolids.

The result of a laboratory-scale study of the biosorption of Zn(II) is presented in this paper. Physical parameters including reaction kinetics, mixing speed and solution pH were investigated. Solution pH also rose an average of 2 pH units over the 24 hour equilibrium time – a valuable side effect when treating acid mine drainage. The outcome of the study highlights the usefulness of biosolids as a biosorbent for the removal/recovery of metal ions from acid mine drainage. A simple, low-cost treatment technology requiring low maintenance would be beneficial to the mining industry to address some issues relating to AMD and would help integrate environmental and economic considerations into sustainable environmental management.

Community-based study on knowledge, attitude and practice on the mode of transmission, prevention and treatment of the Buruli ulcer in Ga West District, Ghana

Buruli ulcer disease (BUD), a devastating tropical disease caused by Mycobacterium ulcerans, occurs in more than 80% of the administrative districts of Ghana. To elucidate community perceptions and
understanding of the aetiology of BUD, attitudes towards Buruli patients and treatment-seeking behaviours, we conducted a survey with 504 heads of households and seven focus group discussions in Ga West District, Ghana. Although 67% of participants regarded BUD as a health problem, 53% did not know its cause. Sixteen per cent attributed the cause to drinking non-potable water, 8.1% mentioned poor personal hygiene or dirty surroundings, and 5.5% identified swimming or wading in ponds as a risk factor. About 5.2% thought that witchcraft and curses cause BUD, and 71.8% indicated that BU sufferers first seek treatment from herbalists and only refer to the hospital as a last resort. The main
reasons were prospects of prolonged hospital stay, cost of transport, loss of earnings and opportunity associated with parents attending their children’s hospitalization over extended period, delays in being
attended by medical staff, and not knowing the cause of the disease or required treatment. The level of acceptance of BUD sufferers was high in adults but less so in children. The challenge facing health workers is to break the vicious cycle of poor medical outcomes leading to poor attitudes to hospital treatment in the community. Because herbalists are often the first people consulted by those who contract the disease, they need to be trained in early recognition of the pre-ulcerative stage of Buruli lesions.