Dynamic whole system testing of combined renewable heating systems : the current state of the art

Objective: For the evaluation of the energetic performance of combined renewable heating systems that supply space heat and domestic hot water for single family houses, dynamic behaviour, component interactions, and control of the system play a crucial role and should be included in test methods. Methods: New dynamic whole system test methods were developed based on “hardware in the loop” concepts. Three similar approaches are described and their differences are discussed. The methods were applied for testing solar thermal systems in combination with fossil fuel boilers (heating oil and natural gas), biomass boilers, and/or heat pumps. Results: All three methods were able to show the performance of combined heating systems under transient operating conditions. The methods often detected unexpected behaviour of the tested system that cannot be detected based on steady state performance tests that are usually applied to single components. Conclusion: Further work will be needed to harmonize the different test methods in order to reach comparable results between the different laboratories. Practice implications: A harmonized approach for whole system tests may lead to new test standards and improve the accuracy of performance prediction as well as reduce the need for field tests.

Testing of combined heating systems for small houses: Improved procedures for whole system test methods : Deliverable 2.3

Dynamic system test methods for heating systems were developed and applied by the institutes SERC and SP from Sweden, INES from France and SPF from Switzerland already before the MacSheep project started. These test methods followed the same principle: a complete heating system – including heat generators, storage, control etc., is installed on the test rig; the test rig software and hardware simulates and emulates the heat load for space heating and domestic hot water of a single family house, while the unit under test has to act autonomously to cover the heat demand during a representative test cycle. Within the work package 2 of the MacSheep project these similar – but different – test methods were harmonized and improved. The work undertaken includes:  • Harmonization of the physical boundaries of the unit under test. • Harmonization of the boundary conditions of climate and load. • Definition of an approach to reach identical space heat load in combination with an autonomous control of the space heat distribution by the unit under test. • Derivation and validation of new six day and a twelve day test profiles for direct extrapolation of test results.   The new harmonized test method combines the advantages of the different methods that existed before the MacSheep project. The new method is a benchmark test, which means that the load for space heating and domestic hot water preparation will be identical for all tested systems, and that the result is representative for the performance of the system over a whole year. Thus, no modelling and simulation of the tested system is needed in order to obtain the benchmark results for a yearly cycle. The method is thus also applicable to products for which simulation models are not available yet. Some of the advantages of the new whole system test method and performance rating compared to the testing and energy rating of single components are:  • Interaction between the different components of a heating system, e.g. storage, solar collector circuit, heat pump, control, etc. are included and evaluated in this test. • Dynamic effects are included and influence the result just as they influence the annual performance in the field. • Heat losses are influencing the results in a more realistic way, since they are evaluated under "real installed" and representative part-load conditions rather than under single component steady state conditions.   The described method is also suited for the development process of new systems, where it replaces time-consuming and costly field testing with the advantage of a higher accuracy of the measured data (compared to the typically used measurement equipment in field tests) and identical, thus comparable boundary conditions. Thus, the method can be used for system optimization in the test bench under realistic operative conditions, i.e. under relevant operating environment in the lab.   This report describes the physical boundaries of the tested systems, as well as the test procedures and the requirements for both the unit under test and the test facility. The new six day and twelve day test profiles are also described as are the validation results.

Humming as a mean of communicating during meal time situations : A Single Case study involving a women with severe dementia and her caregiver

Objective: ‘Music Therapeutic Caregiving’, when caregivers sing for or together with persons with dementia during morning care situations, has been shown to increase verbal and nonverbal communication between persons with dementia and their caregivers, as well as enhance positive and decrease negative emotions in persons with dementia. No studies about singing during mealtimes have been conducted, and this pilot project was designed to elucidate this. However, since previous studies have shown that there is a risk that persons with dementia will start to sing along with the caregiver, the caregiver in this study hummed such that the person with dementia did not sing instead of eat. The aim of this pilot project was threefold: to describe expressed emotions in a woman with severe dementia, and describe communication between her and her caregivers without and with the caregiver humming. The aim was also to measure food and liquid intake without and with humming. Method: The study was constructed as a Single Case ABA design in which the ordinary mealtime constituted a baseline which comprised a woman with severe dementia being fed by her caregivers in the usual way. The intervention included the same woman being fed by the same caregiver who hummed while feeding her. Data comprised video observations that were collected once per week over 5 consecutive weeks. The Verbal and Nonverbal Interaction Scale and Observed Emotion Rating Scale were used to analyze the recorded interactions. Results: A slightly positive influence of communication was shown for the woman with dementia, as well as for the caregiver. Further, the women with dementia showed a slight increase in expressions of positive emotions, and she ate more during the intervention. Conclusion: Based on this pilot study no general conclusions can be drawn. It can be concluded, however, that humming while feeding persons with dementia might slightly enhance communication, and positive expressed emotions in persons with dementia. To confirm this, more studies on group levels are needed. Because previous studies have found that caregiver singing during caring situations influences persons with dementia positively it might be desirable to test the same during mealtime.