Redesign av facktidskriften Ingenjören

This degree project contains a theoretical and a practical part about magazine design. Literature aboutthe subject’s typography and magazine design has been studied and put into practice on the professionaljournal Ingenjören. Besides of that a study about the history of magazine typography for the lastfifty years has been done.Typography and other design factors are important for the magazine to be readable and gives at thesame time the magazine an identity of its own, which has become more and more important throughoutthe last decades.The result of this degree project is a new design for Ingenjören, a design that agrees more with howthe journal want to be considered. A new template, a dummy and a manual have been produced. A decisionof a board meeting of Ingenjörsförbundet in September is now what remains for the new design tobecome a reality.

Redesign av personaltidningen Energitrycket samt anpassning för kopiering och publicering för webben

This degree project has been carried out on the commission of AB Borlänge Energi. The purpose of thisproject was to redesign the magazine Energitrycket. The magazine should inform about the current eventsat the company. The work consisted of redesign of the existing magazine and adjustment to copying andpublishing on the web.This project also contains a research about how paper and colour affect the print results. It shows thatthe maximum contrast and sharp image reproduction is best achieved on woodfree, coated, calenderedpaper with high whiteness. An uncoated, light yellow paper is however to recommend for a printed matterswith a lot of text.It also shows that every production unit reproduces colours differently. To get a good colour reproductionand a good communication between these units, they must be calibrated, and well-functioningICC-profiles must be created.

Redesign av tidskriften Vår Kommun

This project is a redesign of the magazine Vår Kommun, which is a magazine published by the municipality of UpplandsVäsby, Sweden. The redesign included a change of format from tabloid to a magazine format and the creating of adesign with a more modern look and feel of a magazine.

Redesign av Vagabonds guideboksserieThe travelguides of Vagabond - Redesign

Todays travel trends go towards independence and self planning. If you need advice or help when performing your trip, there are several different series of guidebooks on the market and one of these series comes from the travel magazine Vagabond. This degree project concerns the redesigning of the travelguides of Vagabond, or to be precise: their cityguide over Istanbul. The purpose of the new design is to assure the resemblance between the guidebook and the magazine, as wanted by the Art Director of Vagabond Angelica Zander.Prior to the redesigning process preliminary studies that make up the fundamental ideas were made. Three other big titles of guidebooks on the market were analyzed, and in addition a great deal of focus – considering the final purpose – was put on the concept of magazine design. Some color psychology has also been studied to make out what a difference color makes in printed media and what power color can contribute with, when delivering the message. Finally redesign as a concept has been investigated to clarify why the way of expression should be renewed from time to time.The result is presented as spread examples from the cityguide over Istanbul. The new design is applied on the existing content and the result is supposed to appear as a miniature magazine.

Produktion av marknadsförings- och korrespondensmaterial för DUCIS

The report describes the production of graphic correspondence and marketing material for DUCIS(Dalarna University Centre for Irish Studies).A logotype symbol is created on the basis of an element from the Celtic art, and a graphic material thatharmonies with this ideal of style is built around the symbol. A unique visiting card, correspondence cardand letterhead is produced to strengthen the identity of DUCIS outwards.The work proceeds with an international education folder which is an important element in the marketingwork for the MA-education which starts in the autumn of 2003. Two posters, one for the opening ofDUCIS in may 2003 and one for a conference in 2004, are produced. Finally, a redesign of the book coverfor NIS, Nordic Irish Studies, is carried out.The report describes the working process consisting of meetings, practical work and other elementswithin the process. The conclusion is that the work has been quite successful and that this, to a largeextent, depended on an engaged and supporting commissioner. The commissioner also is very satisfi edwith the results.The in-depth studies of the project is about the art and design of the Celtic culture throughout history.The text gives an account for the history and expressions of Celtic art from its birth, 2800 years ago, untilits death in 13th century Ireland and Scotland. Special attention is payed to the golden age of ChristianCeltic art on the british islands, the era from which the pattern of the DUCIS logotype originates.

Lansering av The Richard Juhlin Champagne Club Introducing The Richard Juhlin Champagne Club

Richard Juhlin är världens främste champagneexpert. Han har tillsammans med ett antal andra aktörer startat The Richard Juhlin Champagne Club. Det är en klubb för den totala champagne älskaren. De vill utveckla sin webbplats och därmed knyta an fler medlemmar till klubben. Detta arbete innebär att skapa en ny design, se över struktur och gränssnitt för sidan samt att bilder ska uppdateras och texter ska redigeras. En redesign av webbplatsen www.champagneclub.com har resulterat i ett luftigt och sofistikerat utseende med god läsbarhet. Webbplatsen är lättnavigerad och ger ett inbjudande intryck för besökaren. Webbplatsen ska hela tiden uppdateras och hållas aktuell med nyheter kring de tillhörande barerna, andra aktiviteter som medlemmar blir inbjudna till samt nya tastingnots som är The Rickard Juhlin Champagne Clubs specialitet. Dessa notes är gjorda av Richard Juhlin och fylls ständigt på allt eftersom att nya champagner provas och bedöms.

An Upgrade of Network Traffic Recognition System for SIP/VoIP Traffic Recognition

The purpose of this project is to update the tool of Network Traffic Recognition System (NTRS) which is proprietary software of Ericsson AB and Tsinghua University, and to implement the updated tool to finish SIP/VoIP traffic recognition. Basing on the original NTRS, I analyze the traffic recognition principal of NTRS, and redesign the structure and module of the tool according to characteristics of SIP/VoIP traffic, and then finally I program to achieve the upgrade. After the final test with our SIP data trace files in the updated system, a satisfactory result is derived. The result presents that our updated system holds a rate of recognition on a confident level in the SIP session recognition as well as the VoIP call recognition. In the comparison with the software of Wireshark, our updated system has a result which is extremely close to Wireshark’s output, and the working time is much less than Wireshark. In the aspect of practicability, the memory overflow problem is avoided, and the updated system can output the specific information of SIP/VoIP traffic recognition, such as SIP type, SIP state, VoIP state, etc. The upgrade fulfills the demand of this project.

Inkzine : Redesignandet av en tatuerings- och piercingcommunity

Our employer, Gaddad, is a tattoo and piercing community that was created in 2006 with the basic idea to make it easier for people to get in touch with the tattoo artists and piercers from all over Sweden. With the homepage’s popularity at 2009 they decided to expand with the news page Inkzine. 2011 they contacted us with a plan to expand the homepage to Europe and then merge their two sites under the name Inkzine.The goal of this project was to create design suggestions for Gaddad / Inkzine that both the administration and the current users liked and would consider implementing on the website. In order to evaluate the current design and our suggestions we decided to use two questionnaires . The first questionnaire evaluated the currentdesign to provide us with information for the redesign. The second questionnaire evaluated our new suggestions.With these questionnaire we also carried out an analysis to see the differences in opinions among the users and also between the administration and the users.We also investigated other community homepages, company homepages that had been internationalized, and other tattoo homepages. To see what others had done to adapt to the international market and to investigate the design of tattoo homepages.We also did literary studies in redesign and internationalization, in order to obtain a theoretical foundation for our work.The results of the investigation of other homepages showed that in order to perform an internationalization of a web site no major changes to the looks were necessary, only linguistic changes. The results of our questionnairesshowed that users had in most cases put the majority of their votes on

TCA Evaluation : Lab Measurements, Modelling and System Simulations

The study reported here is part of a large project for evaluation of the Thermo-Chemical Accumulator (TCA), a technology under development by the Swedish company ClimateWell AB. The studies concentrate on the use of the technology for comfort cooling. This report concentrates on measurements in the laboratory, modelling and system simulation. The TCA is a three-phase absorption heat pump that stores energy in the form of crystallised salt, in this case Lithium Chloride (LiCl) with water being the other substance. The process requires vacuum conditions as with standard absorption chillers using LiBr/water. Measurements were carried out in the laboratories at the Solar Energy Research Center SERC, at Högskolan Dalarna as well as at ClimateWell AB. The measurements at SERC were performed on a prototype version 7:1 and showed that this prototype had several problems resulting in poor and unreliable performance. The main results were that: there was significant corrosion leading to non-condensable gases that in turn caused very poor performance; unwanted crystallisation caused blockages as well as inconsistent behaviour; poor wetting of the heat exchangers resulted in relatively high temperature drops there. A measured thermal COP for cooling of 0.46 was found, which is significantly lower than the theoretical value. These findings resulted in a thorough redesign for the new prototype, called ClimateWell 10 (CW10), which was tested briefly by the authors at ClimateWell. The data collected here was not large, but enough to show that the machine worked consistently with no noticeable vacuum problems. It was also sufficient for identifying the main parameters in a simulation model developed for the TRNSYS simulation environment, but not enough to verify the model properly. This model was shown to be able to simulate the dynamic as well as static performance of the CW10, and was then used in a series of system simulations. A single system model was developed as the basis of the system simulations, consisting of a CW10 machine, 30 m2 flat plate solar collectors with backup boiler and an office with a design cooling load in Stockholm of 50 W/m2, resulting in a 7.5 kW design load for the 150 m2 floor area. Two base cases were defined based on this: one for Stockholm using a dry cooler with design cooling rate of 30 kW; one for Madrid with a cooling tower with design cooling rate of 34 kW. A number of parametric studies were performed based on these two base cases. These showed that the temperature lift is a limiting factor for cooling for higher ambient temperatures and for charging with fixed temperature source such as district heating. The simulated evacuated tube collector performs only marginally better than a good flat plate collector if considering the gross area, the margin being greater for larger solar fractions. For 30 m2 collector a solar faction of 49% and 67% were achieved for the Stockholm and Madrid base cases respectively. The average annual efficiency of the collector in Stockholm (12%) was much lower than that in Madrid (19%). The thermal COP was simulated to be approximately 0.70, but has not been possible to verify with measured data. The annual electrical COP was shown to be very dependent on the cooling load as a large proportion of electrical use is for components that are permanently on. For the cooling loads studied, the annual electrical COP ranged from 2.2 for a 2000 kWh cooling load to 18.0 for a 21000 kWh cooling load. There is however a potential to reduce the electricity consumption in the machine, which would improve these figures significantly. It was shown that a cooling tower is necessary for the Madrid climate, whereas a dry cooler is sufficient for Stockholm although a cooling tower does improve performance. The simulation study was very shallow and has shown a number of areas that are important to study in more depth. One such area is advanced control strategy, which is necessary to mitigate the weakness of the technology (low temperature lift for cooling) and to optimally use its strength (storage).

Passive solar options for reducing heating demand and maintain indoor climate in a multifamily house in Sweden

This research was carried out by studying possible renovation of a two-storey detached multifamily building by using passive solar design options in a cold climate in Borlänge, Sweden where the heating Degree Days are 4451 (base 20°C). Borlänge`s housing company, Tunabyggen, plans to renovate the project house located inthe multicultural district, Jakobsgårdarna. The goal of the thesis was to suggest a redesign of the current building, decrease the heating energy use, by applying passive solar design and control strategies, in a most reasonable way. In addition ensure a better thermal comfort for the tenants in the dwellings. Literatures have been studied, from which can be inferred that passive design should be abasic design consideration for all housing constructions, because it has advantages to ensure thermal comfort, and reduce the energy use. In addition further savings can be achieved applying different types of control strategies, from which the house will be more personalized, and better adapted to the user’s needs.The proposed method is based on simulations by using TRNSYS software. First a proper building model was set up, which represents the current state of the project building. Then the thermal insulation and the windows were upgraded, based on today's building regulations. The developments of the passive solar options were accomplished in two steps. First of all the relevant basic passive design elements were considered, then those advantages were compared to the advantages of applying new conventional thermostat, and shading control strategies.The results show that there is significant potential with the different types of passive solar design; their usage depends primarily on the location of the site as well as the orientation of the project building. Applying the control strategies, such as thermostat, and shading control, along the thermal insulation upgrade, may lead to significant energy savings (around 40 %), by comparison to the reference building without any upgrade.

‘Being in a womb’ or ‘playing musical chairs’ : the impact of place and space on infant feeding in NICUs

Background: Becoming a parent of a preterm baby requiring neonatal care constitutes an extraordinary life situation in which parenting begins and evolves in a medical and unfamiliar setting. Although there is increasing emphasis within maternity and neonatal care on the influence of place and space upon the experiences of staff and service users, there is a lack of research on how space and place influence relationships and care in the neonatal environment. The aim of this study was to explore, in-depth, the impact of place and space on parents’ experiences and practices related to feeding their preterm babies in Neonatal Intensive Care Units (NICUs) in Sweden and England. Methods: An ethnographic approach was utilised in two NICUs in Sweden and two comparable units in England, UK. Over an eleven month period, a total of 52 mothers, 19 fathers and 102 staff were observed and interviewed. A grounded theory approach was utilised throughout data collection and analysis. Results: The core category of ‘the room as a conveyance for an attuned feeding’ was underpinned by four categories: the level of ‘ownership’ of space and place; the feeling of ‘at-homeness’; the experience of ‘the door or a shield’ against people entering, for privacy, for enabling a focus within, and for regulating socialising and the; ‘window of opportunity’. Findings showed that the construction and design of space and place was strongly influential on the developing parent-infant relationship and for experiencing a sense of connectedness and a shared awareness with the baby during feeding, an attuned feeding. Conclusions: If our proposed model is valid, it is vital that these findings are considered when developing or reconfiguring NICUs so that account is taken of the influences of spatiality upon parent’s experiences. Even without redesign there are measures that may be taken to make a positive difference for parents and their preterm babies.