The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Intellectual Property Protection : an External Factor that Influences a Foreign Company’s Market Entry Mode into a Prospective Market

Intellectual Property Protection is been understood in this paper as IP laws and enforcement of these laws in order to protect intellectual property rights. The goal of this research work is to understand how Swedish companies view issues regarding to Intellectual Property Protection (IPP) and how it influences a foreign company?s market entry mode. In order to achieve this objective, the Nigerian market situation and its? laws that govern IPP will be used to analyzed this issue. This paper argues that IPP is an important factor that influences a company?s entry mode and this argument finds IP laws and enforcement as two variables that influence the market while the market situation influences the foreign company. In carrying out this research literature was reviewed and interviews carried out. The research methodology section has presented a qualitative research and explains the nature of the interview stages that have been used to achieve the goals concerning the findings of the empirical data. A qualitative method was adopted by carrying out in-depth semi-structured interviews. The empirical data collected from the investigation were gathered and analyzed based on the research questions. The findings show that IPP of a host market influences a potential foreign company through the market situation that is also influenced by IP laws and enforcement. The outcome of these findings argues that the Swedish companies that were interviewed in this research will enter the Nigerian market through an intermediary mode. This has been based on the current IPP system of Nigerian.

Module property verification : A method to plan and perform quality verifications in modular architectures

Modular product architectures have generated numerous benefits for companies in terms of cost, lead-time and quality. The defined interfaces and the module’s properties decrease the effort to develop new product variants, and provide an opportunity to perform parallel tasks in design, manufacturing and assembly. The background of this thesis is that companies perform verifications (tests, inspections and controls) of products late, when most of the parts have been assembled. This extends the lead-time to delivery and ruins benefits from a modular product architecture; specifically when the verifications are extensive and the frequency of detected defects is high. Due to the number of product variants obtained from the modular product architecture, verifications must handle a wide range of equipment, instructions and goal values to ensure that high quality products can be delivered. As a result, the total benefits from a modular product architecture are difficult to achieve. This thesis describes a method for planning and performing verifications within a modular product architecture. The method supports companies by utilizing the defined modules for verifications already at module level, so called MPV (Module Property Verification). With MPV, defects are detected at an earlier point, compared to verification of a complete product, and the number of verifications is decreased. The MPV method is built up of three phases. In Phase A, candidate modules are evaluated on the basis of costs and lead-time of the verifications and the repair of defects. An MPV-index is obtained which quantifies the module and indicates if the module should be verified at product level or by MPV. In Phase B, the interface interaction between the modules is evaluated, as well as the distribution of properties among the modules. The purpose is to evaluate the extent to which supplementary verifications at product level is needed. Phase C supports a selection of the final verification strategy. The cost and lead-time for the supplementary verifications are considered together with the results from Phase A and B. The MPV method is based on a set of qualitative and quantitative measures and tools which provide an overview and support the achievement of cost and time efficient company specific verifications. A practical application in industry shows how the MPV method can be used, and the subsequent benefits

Strategic alliances in a town centre : Stakeholder’s perceptions of property owner’s role

In order for town centres to manage increased competition in retailing, co-operation between stakeholders in a strategic alliance has become more important. A typical set of stakeholders in a strategic alliance for strengthening retailingare retailers, local authorities and property owners. The roles of retailer’sand local authorities’ are well researched. However, the role of property owners is not. The aim of this paper seeks to unfold the role of property owners in a strategic alliance. This is a case study of a medium-sized town in which semi-structured interviews with different stakeholders were conducted. In the chosen town there is a TCM alliance co-operation at work. The above mentioned stakeholders are possible members in an alliance. The case studied shows a fragmented property owner market with no dominant property owner, as it is in many medium-sized towns. Our study shows that many stakeholders look at the role of property owners as crucial for town centre development. However, property owners do not see that they can significantly contribute to or benefit from the development.The main reasons for this opinion are that they consider themselves as not having enough resources or the capability to influence the town development.