Processanalys vid Color Print Sweden AB med fokusering på prepressavdelningen

This thesis work has introduced process orientation at the printing company Color Print Sweden AB. The outcome ofthis work is a survey of the work flow at the prepress department. To visualise the production process at the companya comprehensive mapping of the main process, order-to-delivery, has been made. The work has detected a couple ofcritical elements in the existing process. These elements are the following: initial check of material delivered to the prepressdepartment as well as the control made of the plotter print-out, digital test print and plate. To guarantee the qualityof the prints it is very important that the work made in the prepress department is optimized. This survey can thereforebe used as a basis for continuous improvement in the processes at Color Print Sweden AB. This work has alsoresulted in a template that Color Print Sweden AB can use to design routine descriptions to ensure that specific worktasks are performed the right way by everyone and all the time.

Delivery care in Quang Ninh province, Northern Vietnam : resources and access to safe care.

Every mother and child has the right to survive childbirth which requires skilled birth attendants together with referral and available emergency obstetric care (EmOC). The objective of the study was to describe delivery care routines at different levels in the health care system in Quang Ninh province, Northern Vietnam. The design was cross sectional using a structured questionnaire. Two districts in Quang Ninh province with 40 Community Health Centres (CHC), three district hospitals and one region hospital was included in the study, in total 138 (CHC n=105 and hospitals n=33) health care providers participated. In our study 20% (CHC) of the health care providers assisting deliveries at CHC were midwives and health care provider’s in our study further report to have assisted at less then 10 deliveries/year (81% of respondents at CHC). Findings show that the health care provider’s routines and care for women during labour and delivery vary and that there is a need for re-training and that women in labour should be cared for by health care providers with adequate training like midwifery. In our study CHC had poor resources to provide basic or comprehensive EmOC. Our findings indicate that there is a need for re-training in delivery care among health care providers and since the number of deliveries at CHC is few they should be handled by someone who is a skilled birth attendant. Our findings also show a variation in care routines during labour and delivery among health care providers at CHC and hospital levels and this also show the need for re-training and support from proper authorities in order to improve maternal and newborn health.

A new Home, far from Home : The assimilation process of women involved in intercultural marriages based on Internet meeting

The internet has revolutionized the way we socialize, and as a consequence the way to love. The new communication technologies have facilitated intercultural relationships. Nowadays family relations are one of the major factors in immigration to European countries. Family relations means persons who arrive as family dependents and in accordance with laws regulating family reunification. This thesis aims to apply the classical assimilation theory stated by Milton Gordon (1964), which formulates a series of assimilation stages through which an individual must pass in order to be completely assimilated. In accordance with this theory, marriage is the final phase for a newcomer to fully incorporate into the host society. Thus, based on this presumption and other contemporary theories, the present study has analysed how women who get involved in intercultural marriages based on internet meeting experience these assimilation stages and evaluated the resources used by respondents to incorporate themselves into Swedish society.The main goal of the study was to determine if jumping to the last stage of assimilation does assure the incorporation in the social or/and labour spheres and the findings demonstrate that even though husbands are a valuable resource for assimilation, several cultural issues in Swedish society make it difficult to assure success for the newcomers.On the other hand, Sweden is a country with a strong national sentiment and the assimilation of immigrants still is an important issue to deal with. The Swedish Integration Board has disappeared and major projects for integration have been left in the hands of the municipalities or the Migration Board, institutions that still do not know how to deal with this dilemma.

Production and Delivery (Optimization of production system and reliability)

This thesis is done to solve two issues for Sayid Paper Mill Ltd Pakistan. Section one deals with a practical problem arise in SPM that is cutting a given set of raw paper rolls of known length and width, and a set of product paper rolls of known length (equal to the length of raw paper rolls) and width, practical cutting constraints on a single cutting machine, according to demand orders for all customers. To solve this problem requires to determine an optimal cutting schedule to maximize the overall cutting process profitability while satisfying all demands and cutting constraints. The aim of this part of thesis is to develop a mathematical model which solves this problem.Second section deals with a problem of delivering final product from warehouse to different destinations by finding shortest paths. It is an operational routing problem to decide the daily routes for sending trucks to different destination to deliver their final product. This industrial problem is difficult and includes aspect such as delivery to a single destination and multiple destinations with limited resources. The aim of this part of thesis is to develop a process which helps finding shortest path.

Learning in and through drama : The necessity to use multiple theoretical perspectives in order to understand how learning takes place in drama

The complexity of learning implies that learning seldom is about just one thing. It can be said that learning processes are interdisciplinary. Within educational contexts, learning is not limited to constructed school subjects. In drama education, learning is simultaneously about drama as aesthetic expression and content because drama always is about something. The mainly focus can be on form, content or social aspects. The different aspects are always present, but may be more or less foreground or the background depending on the purpose of education. How do development concerning understanding of form, content, and social interaction, interact in a learning process in drama? My research is based on the view that learning at the same time takes place as an individual, internal process and a socially situated, inter-subjective process. Can learning in drama imply learning that can be transferred between different situations, a transformative learning and if so, how? Transformative learning includes cognitive, affective and corporal and social action aspects and means that the individual's frames of reference are transformed, evolved, to become more insightful and flexible which implies a change of personality. It leads to an integrated knowledge that can be applied in different contexts.   In the paper that will be presented at the conference, theories about how we learn in drama will be discussed in relation to my empirical research concerning drama and learning.

Experimental and computational investigation of the roll forming process

One of the first questions to consider when designing a new roll forming line is the number of forming steps required to produce a profile. The number depends on material properties, the cross-section geometry and tolerance requirements, but the tool designer also wants to minimize the number of forming steps in order to reduce the investment costs for the customer. There are several computer aided engineering systems on the market that can assist the tool designing process. These include more or less simple formulas to predict deformation during forming as well as the number of forming steps. In recent years it has also become possible to use finite element analysis for the design of roll forming processes. The objective of the work presented in this thesis was to answer the following question: How should the roll forming process be designed for complex geometries and/or high strength steels? The work approach included both literature studies as well as experimental and modelling work. The experimental part gave direct insight into the process and was also used to develop and validate models of the process. Starting with simple geometries and standard steels the work progressed to more complex profiles of variable depth and width, made of high strength steels. The results obtained are published in seven papers appended to this thesis. In the first study (see paper 1) a finite element model for investigating the roll forming of a U-profile was built. It was used to investigate the effect on longitudinal peak membrane strain and deformation length when yield strength increases, see paper 2 and 3. The simulations showed that the peak strain decreases whereas the deformation length increases when the yield strength increases. The studies described in paper 4 and 5 measured roll load, roll torque, springback and strain history during the U-profile forming process. The measurement results were used to validate the finite element model in paper 1. The results presented in paper 6 shows that the formability of stainless steel (e.g. AISI 301), that in the cold rolled condition has a large martensite fraction, can be substantially increased by heating the bending zone. The heated area will then become austenitic and ductile before the roll forming. Thanks to the phenomenon of strain induced martensite formation, the steel will regain the martensite content and its strength during the subsequent plastic straining. Finally, a new tooling concept for profiles with variable cross-sections is presented in paper 7. The overall conclusions of the present work are that today, it is possible to successfully develop profiles of complex geometries (3D roll forming) in high strength steels and that finite element simulation can be a useful tool in the design of the roll forming process.

Fear causes tears – perineal injuries in home birth settings : a Swedish interview study

Background: Perineal injury is a serious complication of vaginal delivery that has a severe impact on the quality of life of healthy women. The prevalence of perineal injuries among women who give birth in hospital has increased over the last decade, while it is lower among women who give birth at home. The aim of this study was to describe the practice of midwives in home birth settings with the focus on the occurrence of perineal injuries. Methods: Twenty midwives who had assisted home births for between one and 29 years were interviewed using an interview guide. The midwives also had experience of working in a hospital delivery ward. All the interviews were tape-recorded and transcribed. Content analysis was used. Results: The overall theme was "No rushing and tearing about", describing the midwives' focus on the natural process taking its time. The subcategories 1) preparing for the birth; 2) going along with the physiological process; 3) creating a sense of security; 4) the critical moment and 5) midwifery skills illuminate the management of labor as experienced by the midwives when assisting births at home. Conclusions: Midwives who assist women who give birth at home take many things into account in order to minimize the risk of complications during birth. Protection of the woman's perineum is an act of awareness that is not limited to the actual moment of the pushing phase but starts earlier, along with the communication between the midwife and the woman.