INVENTORY CONTROL SYSTEM : Optimization of production system and reliability

The main idea of this research to solve the problem of inventory management for the paper industry SPM PVT limited. The aim of this research was to find a methodology by which the inventory of raw material could be kept at minimum level by means of buffer stock level.The main objective then lies in finding the minimum level of buffer stock according to daily consumption of raw material, finding the Economic Order Quantity (EOQ) reorders point and how much order will be placed in a year to control the shortage of raw material.In this project, we discuss continuous review model (Deterministic EOQ models) that includes the probabilistic demand directly in the formulation. According to the formula, we see the reorder point and the order up to model. The problem was tackled mathematically as well as simulation modeling was used where mathematically tractable solution was not possible.The simulation modeling was done by Awesim software for developing the simulation network. This simulation network has the ability to predict the buffer stock level based on variable consumption of raw material and lead-time. The data collection for this simulation network is taken from the industrial engineering personnel and the departmental studies of the concerned factory. At the end, we find the optimum level of order quantity, reorder point and order days.

Simulation of Photovoltaic Panel Production as Complement to Ground Source Heat Pump System

This master thesis presents a new technological combination of two environmentally friendly sources of energy in order to provide DHW, and space heating. Solar energy is used for space heating, and DHW production using PV modules which supply direct current directly to electrical heating elements inside a water storage tank. On the other hand a GSHP system as another source of renewable energy provides heat in the water storage tank of the system in order to provide DHW and space heating. These two sources of renewable energy have been combined in this case-study in order to obtain a more efficient system, which will reduce the amount of electricity consumed by the GSHP system.The key aim of this study is to make simulations, and calculations of the amount ofelectrical energy that can be expected to be produced by a certain amount of PV modules that are already assembled on a house in Vantaa, southern Finland. This energy is then intended to be used as a complement to produce hot water in the heating system of the house beside the original GSHP system. Thus the amount of electrical energy purchased from the grid should be reduced and the compressor in the GSHP would need fewer starts which would reduce the heating cost of the GSHP system for space heating and providing hot water.The produced energy by the PV arrays in three different circuits will be charged directly to three electrical heating elements in the water storage tank of the existing system to satisfy the demand of the heating elements. The excess energy can be used to heat the water in the water storage tank to some extent which leads to a reduction of electricity consumption by the different components of the GSHP system.To increase the efficiency of the existing hybrid system, optimization of different PV configurations have been accomplished, and the results are compared. Optimization of the arrays in southern and western walls shows a DC power increase of 298 kWh/year compared with the existing PV configurations. Comparing the results from the optimization of the arrays on the western roof if the intention is to feed AC power to the components of the GSHP system shows a yearly AC power production of 1,646 kWh.This is with the consideration of no overproduction by the PV modules during the summer months. This means the optimized PV systems will be able to cover a larger part of summer demand compared with the existing system.

The attractiveness of the work is affected when production of handcrafted log houses moves indoors

Viewed from a historical perspective, a shift has occurred within the forestry and wood sector towards indoor work. In Sweden, the production of handcrafted log houses has now also begun to move indoors. With a point of departure in development processes within the log house sector involving working indoors, education, work attractiveness, between 2001-2005, the aim of this study was to compare indoor work with outdoor work, based on log house builders' experience of working on handcrafted log houses. Methods used in the interactive development project involving apprentices, experienced log house builders and researchers, were participation with continuous documentation of experiences and opinions; questions; interviews; and measurement of the work environment. The Attractive Work Model has been used in order to analyse perceptions and values. The changes, 15 out of 22 areas, were perceived both negatively and positively. Therefore, it can not be said that working on traditional, handcrafted log houses becomes more attractive if it is moved indoors. The majority wanted to work both outdoors and indoors, while most of the others only wanted to work outdoors. The results indicate that there is scope for developing more attractive work indoors by utilising experiences from log house builders and closely related activities such as the forestry and wood sector. Changes made within one area of work attractiveness affect other areas. Further research is needed both with regard to comparisons between indoor and outdoor work and regarding the interaction between the areas that are identified in the Attractive Work Model.

The priority of temporal aspects in L2-Swedish prosody : Studies in perception and production

Foreign accent can be everything from hardly detectable to rendering the second language speech unintelligible. It is assumed that certain aspects of a specific target language contribute more to making the foreign accented speech intelligible and listener friendly, than others. The present thesis examines a teaching strategy for Swedish pronunciation in second language education. The teaching strategy “Basic prosody” or BP, gives priority to temporal aspects of Swedish prosody, which means the temporal phonological contrasts word stress and quantity, as well as the durational realizations of these contrasts. BP does not prescribe any specific tonal realizations. This standpoint is based on the great regional variety in realization and distribution of Swedish word accents. The teaching strategy consists virtually of three directives: · Stress the proper word in the sentence. · Stress proper syllables in stressed words and make them longer. · Lengthen the proper segment – vowel or subsequent consonant – in the stressed syllable. These directives reflect the view that all phonological length is stress-induced, and that vowel length and consonant length are equally important as learning goals. BP is examined in the light of existing findings in the field of second language pronunciation and with respect to the phonetic correlates of Swedish stress and quantity. Five studies examine the relation between segment durations and the categorization made by native Swedish listeners. The results indicate that the postvocalic consonant duration contributes to quantity categorization as well as giving the proper duration to stressed syllables. Furthermore, native Swedish speakers are shown to apply the complementary /V: C/ - /VC:/ pattern also when speaking English and German, by lengthening postvocalic consonants. The correctness of the priority is not directly addressed but important aspects of BP are supported by earlier findings as well as the results from the present studies.

Skapa förutsättningar för att implementera Lean production i en tillverkningsprocess som kännetecknas av HVLV : - En fallstudie på Tibrokök Sverige AB

Idag är det vanligt att företagen konkurrerar med produkter som innefattar en fysisk vara som har utvidgats med olika tjänster för att kunna tillfredsställa kundens behov. I takt med detta ökar produkternas komplexitet och högre krav ställs på leverantörerna. Denna utveckling har lett till att många företag som tillverkar produkter med hög variation måste arbeta helt kundorderstyrt för att kunna tillgodose kundernas ökande krav. Företagen som tillverkar dessa komplexa produkter har en tillverkning som karaktäriseras av hög variation och låg volym vilket benämns med förkortningen HVLV. Utmaningen för dessa HVLV-företag ligger i att ha en hög produktmixflexibilitet med så låg resursanvändning som möjligt. För att effektivisera verksamheten har många företag därför intresserat sig för Lean production som har visat sig vara ett framgångsrikt koncept för tillverkande företag runt om i världen som effektiviserat sin produktion. Ett flertal artiklar har uppmärksammat begränsningar vid implementeringen av Lean production i HVLV-miljöer. Artiklar pekar vidare på behovet av ytterligare forskning kring Lean productions applicerbarhet i HVLV-miljöer och detta var uppkomsten till examensarbetets bakgrund och syfte. En fallstudie har genomförts på Tibrokök som är ett företag med en helt kundorderstyrd produktion som kännetecknas av HVLV. Med hjälp av fallstudien syftar examensarbetet till att undersöka om verktygen processkartläggning inkl. tidsstudier och layoutflödesdiagram kan bidra till att skapa förutsättningar för implementering av Lean production i en enskild tillverkningsprocess i en HVLV-miljö. Trots att verktygen har behövt anpassas något så anses de ha varit användbara och bidragande till skapandet av förutsättningar för implementering av Lean production i denna HVLV-miljö. Detta eftersom vi kunde identifiera många orsaker till slöseri samt ta fram ett förslag som skapar effektiviseringar av Tibroköks ytbehandlingsprocess i det framtida läget.