Energy Analysis within Industrial Hydraulics and Correspondent Solar PV System Design

Energy efficiency and renewable energy use are two main priorities leading to industrial sustainability nowadays according to European Steel Technology Platform (ESTP). Modernization efforts can be done by industries to improve energy consumptions of the production lines. These days, steel making industrial applications are energy and emission intensive. It was estimated that over the past years, energy consumption and corresponding CO2 generation has increased steadily reaching approximately 338.15 parts per million in august 2010 [1]. These kinds of facts and statistics have introduced a lot of room for improvement in energy efficiency for industrial applications through modernization and use of renewable energy sources such as solar Photovoltaic Systems (PV).The purpose of this thesis work is to make a preliminary design and simulation of the solar photovoltaic system which would attempt to cover the energy demand of the initial part of the pickling line hydraulic system at the SSAB steel plant. For this purpose, the energy consumptions of this hydraulic system would be studied and evaluated and a general analysis of the hydraulic and control components performance would be done which would yield a proper set of guidelines contributing towards future energy savings. The results of the energy efficiency analysis showed that the initial part of the pickling line hydraulic system worked with a low efficiency of 3.3%. Results of general analysis showed that hydraulic accumulators of 650 liter size should be used by the initial part pickling line system in combination with a one pump delivery of 100 l/min. Based on this, one PV system can deliver energy to an AC motor-pump set covering 17.6% of total energy and another PV system can supply a DC hydraulic pump substituting 26.7% of the demand. The first system used 290 m2 area of the roof and was sized as 40 kWp, the second used 109 m2 and was sized as 15.2 kWp. It was concluded that the reason for the low efficiency was the oversized design of the system. Incremental modernization efforts could help to improve the hydraulic system energy efficiency and make the design of the solar photovoltaic system realistically possible. Two types of PV systems where analyzed in the thesis work. A method was found calculating the load simulation sequence based on the energy efficiency studies to help in the PV system simulations. Hydraulic accumulators integrated into the pickling line worked as energy storage when being charged by the PV system as well.

Conceptual Product Development in Small Corporations

The main objective of the thesis “Conceptual Product Development in Small Corporations” is by the use of a case study test the MFD™-method (Erixon G. , 1998) combined with PMM in a product development project. (Henceforth called MFD™/PMM-method). The MFD™/PMM-method used for documenting and controlling a product development project has since it was introduced been used in several industries and projects. The method has been proved to be a good way of working with the early stages of product development, however, there are almost only projects carried out on large industries which means that there are very few references to how the MFD™/PMM-method works in a small corporation. Therefore, was the case study in the thesis “Conceptual Product Development in Small Corporations” carried out in a small corporation to find out whether the MFD™/PMM-method also can be applied and used in such a corporation.The PMM was proposed in a paper presented at Delft University of Technology in Holland 1998 by the author and Gunnar Erixon. (See appended paper C: The chart of modular function deployment.) The title “The chart of modular function deployment” was later renamed as PMM, Product Management Map. (Sweden PreCAD AB, 2000). The PMM consists of a QFD-matrix linked to MIM (Module Indication Matrix) via a coupling matrix which makes it possible to make an unbroken chain from the customer domain to the designed product/modules. The PMM makes it easy to correct omissions made in creating new products and modules.In the thesis “Conceptual Product Development in Small Corporations” the universal MFD™/PMM-method has been adapted by the author to three models of product development; original-, evolutionary- and incremental development.The evolutionary adapted MFD™/PMM-method was tested as a case study at Atlings AB in the community Ockelbo. Atlings AB is a small corporation with a total number of 50 employees and an annual turnover of 9 million €. The product studied at the corporation was a steady rest for supporting long shafts in turning. The project team consisted of management director, a sales promoter, a production engineer, a design engineer and a workshop technician, the author as team leader and a colleague from Dalarna University as discussion partner. The project team has had six meetings.The project team managed to use MFD™ and to make a complete PMM of the studied product. There were no real problems occurring in the project work, on the contrary the team members worked very well in the group, having ideas how to improve the product. Instead, the challenge for a small company is how to work with the MFD™/PMM-method in the long run! If the MFD™/PMM-method is to be a useful tool for the company it needs to be used continuously and that requires financial and personnel resources. One way for the company to overcome the probable lack of recourses regarding capital and personnel is to establish a good cooperation with a regional university or a development centre.

The sustainability revolution : A societal paradigm shift - ethos, innovation, government transformation

The Sustainability revolution: A societal paradigm shift – ethos, innovation, governance transformation This paper identifies several key mechanisms that underlie major paradigm shifts. After identifying four such mechanisms, the article focuses on one type of transformation which has a prominent place in the sustainability revolution that the article argues is now taking place. The transformation is piecemeal, incremental, diffuse – in earlier writings referred to as ”organic”. This is a more encompassing notion than grassroots, since the innovation and transformation processes may be launched and developed at multiple levels through diverse mechanisms of discovery and development. Major features of the sustainability revolution are identified and comparisons made to the industrial revolution.

Optimal V. O2max-to-mass ratio for predicting 15 km performance among elite male cross-country skiers

The aim of this study was 1) to validate the 0.5 body-mass exponent for maximal oxygen uptake (V. O2max) as the optimal predictor of performance in a 15 km classical-technique skiing competition among elite male cross-country skiers and 2) to evaluate the influence of distance covered on the body-mass exponent for V. O2max among elite male skiers. Twenty-four elite male skiers (age: 21.4±3.3 years [mean ± standard deviation]) completed an incremental treadmill roller-skiing test to determine their V. O2max. Performance data were collected from a 15 km classicaltechnique cross-country skiing competition performed on a 5 km course. Power-function modeling (ie, an allometric scaling approach) was used to establish the optimal body-mass exponent for V . O2max to predict the skiing performance. The optimal power-function models were found to be race speed = 8.83⋅(V . O2max m-0.53) 0.66 and lap speed = 5.89⋅(V . O2max m-(0.49+0.018lap)) 0.43e0.010age, which explained 69% and 81% of the variance in skiing speed, respectively. All the variables contributed to the models. Based on the validation results, it may be recommended that V. O2max divided by the square root of body mass (mL⋅min−1 ⋅kg−0.5) should be used when elite male skiers’ performance capability in 15 km classical-technique races is evaluated. Moreover, the body-mass exponent for V . O2max was demonstrated to be influenced by the distance covered, indicating that heavier skiers have a more pronounced positive pacing profile (ie, race speed gradually decreasing throughout the race) compared to that of lighter skiers.

Assumptions of retail price strategy and price tactic decisions

This licentiate thesis sets out to analyse how a retail price decision frame can be understood. It is argued that it is possible to view price determination within retailing by determining the level of rationality and using behavioural theories. In this way, it is possible to use assumptions derived from economics and marketing to establish a decision frame. By taking a management perspective, it is possible to take into consideration how it is assumed that the retailer should strategically manage price decisions, which decisions might be assumed to be price decisions, and which decisions can be assumed to be under the control of the retailer. Theoretically, this licentiate thesis has its foundations in different assumptions about decision frames regarding the level of information collected, the goal of the decisions, and the outcomes of the decisions. Since the concepts that are to be analysed within this thesis are price decisions, the latter part of the theory discusses price decision in specific: sequential price decisions, at the point of the decision, and trade-offs when making a decision. Here, it is evident that a conceptual decision frame that is intended to illustrate price decisions includes several aspects: several decision alternatives and what assumptions of rationality that can be made in relation to the decision frame. A semi-structured literature review was conducted. As a result, it became apparent that two important things in the decision frame were unclear: time assumptions regarding the decisions and the amount of information that is assumed in relation to the different decision alternatives. By using the same articles that were used to adjust the decision frame, a topical study was made in order to determine the time specific assumptions, as well as the analytical level based on the assumed information necessary for individual decision alternatives. This, together with an experimental study, was necessary to be able to discuss the consequences of the rationality assumption. When the retail literature is analysed for the level of rationality and consequences of assuming certain assumptions of rationality, three main things becomes apparent. First, the level of rationality or the assumptions of rationality are seldom made or accounted for in the literature. In fact, there are indications that perfect and bounded rationality assumptions are used simultaneously within studies. Second, although bounded rationality is a recognised theoretical perspective, very few articles seem to use these assumptions. Third, since the outcome of a price decision seems to provide no incremental sale, it is questionable which assumptions of rationality that should be used. It might even be the case that no assumptions of rationality at all should be used. In a broader perspective, the findings from this licentiate thesis show that the assumptions of rationality within retail research is unclear. There is an imbalance between the perspectives used, where the main assumptions seem to be concentrated to perfect rationality. However, it is suggested that by clarifying which assumptions of rationality that is used and using bounded rationality assumptions within research would result in a clearer picture of the multifaceted price decisions that could be assumed within retailing. The theoretical contribution of this thesis mainly surround the identification of how the level of rationality provides limiting assumptions within retail research. Furthermore, since indications show that learning might not occur within this specific context it is questioned whether the basic learning assumption within bounded rationality should be used in this context.