Separation and Execution of graphical engine on a cross platform IDE to enhance performance

“Biosim” is a simulation software which works to simulate the harvesting system.This system is able to design a model for any logistic problem with the combination of several objects so that the artificial system can show the performance of an individual model. The system will also describe the efficiency, possibility to be chosen for real life application of that particular model. So, when any one wish to setup a logistic model like- harvesting system, in real life he/she may be noticed about the suitable prostitution for his plants and factories as well as he/she may get information about the least number of objects, total time to complete the task, total investment required for his model, total amount of noise produced for his establishment in advance. It will produce an advance over view for his model. But “Biosim” is quite slow .As it is an object based system, it takes long time to make its decision. Here the main task is to modify the system so that it can work faster than the previous. So, the main objective of this thesis is to reduce the load of “Biosim” by making some modification of the original system as well as to increase its efficiency. So that the whole system will be faster than the previous one and performs more efficiently when it will be applied in real life. Theconcept is to separate the execution part of ”Biosim” form its graphical engine and run this separated portion in a third generation language platform. C++ is chosenhere as this external platform. After completing the proposed system, results with different models have been observed. The results show that, for any type of plants of fields, for any number of trucks, the proposed system is faster than the original system. The proposed system takes at least 15% less time “Biosim”. The efficiency increase with the complexity of than the original the model. More complex the model, more efficient the proposed system is than original “Biosim”.Depending on the complexity of a model, the proposed system can be 56.53 % faster than the original “Biosim”.

Färgperception och grafisk profilering av Hedemora Assistansservie

An inquiring study of literature has been conducted, about the human colour perception (theimpression of colours). The colour has been examined, both as conscious and subconscious signal,and reasons for it’s influence have been exammed.The practical parts of the degree project have been carried out in active collaboration with thecustomer, The Association Hedemora Assistansservice (HASS), which offers handicapped persons astimulating spare time by personal assistance. A graphical profile-programme and an informationfolderhave been produced, easy received by both handicapped (with defective vision) and normallysighted persons. The graphical profile-programme was made in collaboration with the customer.Concerning the information-folder HASS took the main responsibility for the choice of photographswhile layout, text writing, colour-reproduction, original-production and connecting printing workswere made independently. The customer has shown engagement and interest and had a lot of opinionsabout the degree project, of which have been paid attention.

Provtryck på skärm

This Degree Project is carried through in association with Fototext in Guthenburg. The firmsees benefits using”Soft Proof” technology for both economic and time-saving. The reasonfor ”Soft Proofing” for internal/ external production is to estimate and controll documentswithout using digital or chemical printing output.The different technical solutions to ”Soft Proof”, knowledges and facts aboutColorManagement together with PDF-workflow is going to pattern for a correct succesfull”Soft Proofing” on the monitor.Acrobat 5 in association with Photoshop 6 are effectively used in ”Soft Proofing” technic.The advance and capacity of the graphical softwares which are explained in this reporthelps the users to begin to experiment with ”Soft Proof”. Graphical firms which are interestedto begin working with ”Soft Proof” need to allready have knowledge in ICC-profilingand a practical ColorManaged workflow.

Kvalitetssäkring av Clas Ohlson AB´s grafiska produktionsflöde

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow. Wrong colorspaces andCMYK-profiles was used in big extent, the displays where uncalibrated or incorrectly calibrated, wrong PDF-presetswas used frequently and it also showed that six different suppliers for their printing materials were used. The solutionsthat were relevant for the problems and defects were later on presented as proposals on measures.

Developing a Communication link between Agents and cross Platform IDE

The main objective of this thesis work is to develop communication link between Runrev Revolution (IDE) and JADE (Multi-Agent System) through Socket programming using TCP/IP layer. These two independent platforms are connected using socket programming technique. Socket programming is considered to be newly emerging technology among these two platforms, the work done in this thesis work is considered to be a prototype.A Graphical simulation model is developed by salixphere (Company in Hedemora) to simulate logistic problems using Runrev Revolution (IDE). The simulation software/program is called “BIOSIM”. The logistic problems are complex, and conventional optimization techniques are unlikely very successful. “BIOSIM” can demonstrate the graphical representation of logistic problems depending upon the problem domains. As this simulation model is developed in revolution programming language (Transcript) which is dynamically typed and English-like language, it is quite slow compared to other high level programming languages. The object of this thesis work is to add intelligent behaviour in graphical objects and develop communication link between Runrev revolution (IDE) and JADE (Multi-Agent System) using TCP/IP layers.The test shows the intelligent behaviour in the graphical objects and successful communication between Runrev Revolution (IDE) and JADE (Multi-Agent System).

A fuzzy rule-based decision support system for Duodopa treatment in Parkinson

A decision support system (DSS) was implemented based on a fuzzy logic inference system (FIS) to provide assistance in dose alteration of Duodopa infusion in patients with advanced Parkinson’s disease, using data from motor state assessments and dosage. Three-tier architecture with an object oriented approach was used. The DSS has a web enabled graphical user interface that presents alerts indicating non optimal dosage and states, new recommendations, namely typical advice with typical dose and statistical measurements. One data set was used for design and tuning of the FIS and another data set was used for evaluating performance compared with actual given dose. Overall goodness-of-fit for the new patients (design data) was 0.65 and for the ongoing patients (evaluation data) 0.98. User evaluation is now ongoing. The system could work as an assistant to clinical staff for Duodopa treatment in advanced Parkinson’s disease.

A web-based system for visualizing upper limb motor performance of Parkinson’s disease patients

Objective To design, develop and set up a web-based system for enabling graphical visualization of upper limb motor performance (ULMP) of Parkinson’s disease (PD) patients to clinicians. Background Sixty-five patients diagnosed with advanced PD have used a test battery, implemented in a touch-screen handheld computer, in their home environment settings over the course of a 3-year clinical study. The test items consisted of objective measures of ULMP through a set of upper limb motor tests (finger to tapping and spiral drawings). For the tapping tests, patients were asked to perform alternate tapping of two buttons as fast and accurate as possible, first using the right hand and then the left hand. The test duration was 20 seconds. For the spiral drawing test, patients traced a pre-drawn Archimedes spiral using the dominant hand, and the test was repeated 3 times per test occasion. In total, the study database consisted of symptom assessments during 10079 test occasions. Methods Visualization of ULMP The web-based system is used by two neurologists for assessing the performance of PD patients during motor tests collected over the course of the said study. The system employs animations, scatter plots and time series graphs to visualize the ULMP of patients to the neurologists. The performance during spiral tests is depicted by animating the three spiral drawings, allowing the neurologists to observe real-time accelerations or hesitations and sharp changes during the actual drawing process. The tapping performance is visualized by displaying different types of graphs. Information presented included distribution of taps over the two buttons, horizontal tap distance vs. time, vertical tap distance vs. time, and tapping reaction time over the test length. Assessments Different scales are utilized by the neurologists to assess the observed impairments. For the spiral drawing performance, the neurologists rated firstly the ‘impairment’ using a 0 (no impairment) – 10 (extremely severe) scale, secondly three kinematic properties: ‘drawing speed’, ‘irregularity’ and ‘hesitation’ using a 0 (normal) – 4 (extremely severe) scale, and thirdly the probable ‘cause’ for the said impairment using 3 choices including Tremor, Bradykinesia/Rigidity and Dyskinesia. For the tapping performance, a 0 (normal) – 4 (extremely severe) scale is used for first rating four tapping properties: ‘tapping speed’, ‘accuracy’, ‘fatigue’, ‘arrhythmia’, and then the ‘global tapping severity’ (GTS). To achieve a common basis for assessment, initially one neurologist (DN) performed preliminary ratings by browsing through the database to collect and rate at least 20 samples of each GTS level and at least 33 samples of each ‘cause’ category. These preliminary ratings were then observed by the two neurologists (DN and PG) to be used as templates for rating of tests afterwards. In another track, the system randomly selected one test occasion per patient and visualized its items, that is tapping and spiral drawings, to the two neurologists. Statistical methods Inter-rater agreements were assessed using weighted Kappa coefficient. The internal consistency of properties of tapping and spiral drawing tests were assessed using Cronbach’s α test. One-way ANOVA test followed by Tukey multiple comparisons test was used to test if mean scores of properties of tapping and spiral drawing tests were different among GTS and ‘cause’ categories, respectively. Results When rating tapping graphs, inter-rater agreements (Kappa) were as follows: GTS (0.61), ‘tapping speed’ (0.89), ‘accuracy’ (0.66), ‘fatigue’ (0.57) and ‘arrhythmia’ (0.33). The poor inter-rater agreement when assessing “arrhythmia” may be as a result of observation of different things in the graphs, among the two raters. When rating animated spirals, both raters had very good agreement when assessing severity of spiral drawings, that is, ‘impairment’ (0.85) and irregularity (0.72). However, there were poor agreements between the two raters when assessing ‘cause’ (0.38) and time-information properties like ‘drawing speed’ (0.25) and ‘hesitation’ (0.21). Tapping properties, that is ‘tapping speed’, ‘accuracy’, ‘fatigue’ and ‘arrhythmia’ had satisfactory internal consistency with a Cronbach’s α coefficient of 0.77. In general, the trends of mean scores of tapping properties worsened with increasing levels of GTS. The mean scores of the four properties were significantly different to each other, only at different levels. In contrast from tapping properties, kinematic properties of spirals, that is ‘drawing speed’, ‘irregularity’ and ‘hesitation’ had a questionable consistency among them with a coefficient of 0.66. Bradykinetic spirals were associated with more impaired speed (mean = 83.7 % worse, P < 0.001) and hesitation (mean = 77.8% worse, P < 0.001), compared to dyskinetic spirals. Both these ‘cause’ categories had similar mean scores of ‘impairment’ and ‘irregularity’. Conclusions In contrast from current approaches used in clinical setting for the assessment of PD symptoms, this system enables clinicians to animate easily and realistically the ULMP of patients who at the same time are at their homes. Dynamic access of visualized motor tests may also be useful when observing and evaluating therapy-related complications such as under- and over-medications. In future, we foresee to utilize these manual ratings for developing and validating computer methods for automating the process of assessing ULMP of PD patients.

Gamers preferenser för användargränssnitt på en spelrelaterad webbplats

Användargränssnittsdesign är en stor del av en webbsidas intryck och förändras snabbt i takt med teknologins utveckling och trender. Men det gäller även att locka rätt användare. Hur lockar en webbsida till sig rätt målgrupp? Målet med rapporten var att analysera målgruppen gamers utifrån hur de upplever det grafiska användargränssnittet på en spelrelaterad webbsida. Rapporten behandlar även översiktitligt om aktuella trender för webbdesign tilltalar gamers. Undersökningen utfördes i två delar. I den första delen undersöktes 20 av de största spelrelaterade webbsidornas användargränssnitt. Under del två genomfördes en enkät och intervjuer med målgruppen gamers. I både enkäten och intervjuerna fick respondenterna ta ställning till olika mockups av en fiktiv webbsida. Det var stor skillnad på vad gamers ansåg vara tilltalande jämfört med hur de analyserade webbsidorna såg ut. Exempelvis var endast 25 % av de analyserade webbsidorna mörka medan 71,9 % av respondenterna föredrog en mörk layout.

Layout och typografi i vetenskapliga artiklar : En kartläggning av konventioner gällande grafisk formgivning inom matematik, medicin och utbildningsvetenskap

En deskriptiv visuell innehållsanalys genomfördes med en korpus bestående av vetenskapliga artiklar från 30 topprankade tidskrifter jämnt fördelade på de tre disciplinerna matematik, medicin och utbildningsvetenskap, med syfte att undersöka om det fanns ett samband mellan tidskrifternas disciplintillhörighet och den grafiska formgivningen. Kartläggningen omfattade layout (bl.a. sidformat, spalter, marginalstorlek, användning av grafiska element, placering av tabeller, figurer och pagina) och typografiskt utseende hos titel, rubriker, brödtext och abstrakt (t.ex. teckenstorlek, textjustering, teckengrovlek, typsnitt, färg och radavstånd). Resultaten visar att disciplinerna använde olika men även gemensamma konventioner i sitt grafiska utseende. Matematik uppvisade enkelspaltig layout med liten typografisk variation, genomgående användning av typsnitt från familjen Transitional eller Transitional/Didone för hela dokumentet, avsaknad av kulört färg och sällan användning av grafiska element. Medicin uppvisade större variation med användning av kulört färg, icke-centrerad typografi med både sansseriff- och seriff-typsnitt, grafiska element och ramar som förstärker det ofta använda dubbelspaltiga gridsystemet. Utbildningsvetenskap uppvisade en grafisk design som återfanns i båda disciplinerna, men påminde mest om matematik till utseendet. Kodbok ingår i sin helhet som bilaga. Uppsatsen i sig är delvis formgiven med utgångspunkt i de erhållna resultaten.

Soft computing in biometrics : a pragmatic appraisal

The ever increasing spurt in digital crimes such as image manipulation, image tampering, signature forgery, image forgery, illegal transaction, etc. have hard pressed the demand to combat these forms of criminal activities. In this direction, biometrics - the computer-based validation of a persons' identity is becoming more and more essential particularly for high security systems. The essence of biometrics is the measurement of person’s physiological or behavioral characteristics, it enables authentication of a person’s identity. Biometric-based authentication is also becoming increasingly important in computer-based applications because the amount of sensitive data stored in such systems is growing. The new demands of biometric systems are robustness, high recognition rates, capability to handle imprecision, uncertainties of non-statistical kind and magnanimous flexibility. It is exactly here that, the role of soft computing techniques comes to play. The main aim of this write-up is to present a pragmatic view on applications of soft computing techniques in biometrics and to analyze its impact. It is found that soft computing has already made inroads in terms of individual methods or in combination. Applications of varieties of neural networks top the list followed by fuzzy logic and evolutionary algorithms. In a nutshell, the soft computing paradigms are used for biometric tasks such as feature extraction, dimensionality reduction, pattern identification, pattern mapping and the like.