An investigation of worn work roll materials used in the finishing stands of the hot strip mill for steel rolling

The surface failure characteristics of different work roll materials, i.e. High Speed Steel, High Chromium Iron and Indefinite Chill Iron, used in the finishing stands of a hot strip mill have been investigated using stereo microscopy, 3D optical profilometry, scanning electron microscopy and energy dispersive X-ray spectroscopy. The results show that the surface failure mechanisms of work rolls for hot rolling are very complex, involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation. Despite the differences in chemical composition and microstructure, the tribological response of the different work roll materials was found to be strongly dependent on the material microstructure and especially the presence and distribution of microstructural constituents, such as the different carbide phases and graphite (in the case of Indefinite Chill Iron). Cracking and chipping of the work roll surfaces, both having a negative impact on work roll wear, are strongly influenced by the presence of carbides, carbide networks and graphite in the work roll surface. Consequently, the amount of carbide forming elements as well as the manufacturing process must be controlled in order to obtain an optimised microstructure and a predictable wear rate.

Wear of coated and uncoated PCBN cutting tool used in turning and milling

This licentiate thesis has the main focus on evaluation of the wear of coated and uncoated polycrystalline cubic boron nitride cutting tool used in cutting operations against hardened steel. And to exam the surface finish and integrity of the work material used. Harder work material, higher cutting speed and cost reductions result in the development of harder and more wear resistance cutting tools. Although PCBN cutting tools have been used in over 30 years, little work have been done on PVD coated PCBN cutting tools. Therefore hard turning and hard milling experiments with PVD coated and uncoated cutting tools have been performed and evaluated. The coatings used in the present study are TiSiN and TiAlN. The wear scar and surface integrity have been examined with help of several different characterization techniques, for example scanning electron microscopy and Auger electron spectroscopy.   The results showed that the PCBN cutting tools used displayed crater wear, flank wear and edge micro chipping. While the influence of the coating on the crater and flank wear was very small and the coating showed a high tendency to spalling. Scratch testing of coated PCBN showed that, the TiAlN coating resulted in major adhesive fractures. This displays the importance of understanding the effect of different types of lapping/grinding processes in the pre-treatment of hard and super hard substrate materials and the amount and type of damage that they can create. For the cutting tools used in turning, patches of a adhered layer, mainly consisting of FexOy were shown at both the crater and flank. And for the cutting tools used in milling a tribofilm consisting of SixOy covered the crater. A combination of tribochemical reactions, adhesive wear and mild abrasive wear is believed to control the flank and crater wear of the PCBN cutting tools. On a microscopic scale the difference phases of the PCBN cutting tool used in turning showed different wear characteristics. The machined surface of the work material showed a smooth surface with a Ra-value in the range of 100-200 nm for the turned surface and 100-150 nm for the milled surface. With increasing crater and flank wear in combination with edge chipping the machined surface becomes rougher and showed a higher Ra-value. For the cutting tools used in milling the tendency to micro edge chipping was significant higher when milling the tools steels showing a higher hard phase content and a lower heat conductivity resulting in higher mechanical and thermal stresses at the cutting edge.

En förstudie till kvalitetsutveckling på GD-tryck

The print- and mailroom at Gefle Dagblad (GD-tyck) is handling an increasing amount of commercial jobsalong with the newspaper production. Investments have above all been done in the mailroom to be able tooffer commercial costumers a higher degree of finishing and there are plans to expand further in the commercialmarket. GD-tryck is of the opinion that they need to secure the quality of their production to be ableto do such expansion, which is the reason why a quality system of some kind may be appropriate. Howeverthere are no plans to certify such a quality system according to ISO 9001:2000.In this exam report the present methods of working have been analysed from a quality perspective.Suggestions on how GD-tryck should be working with quality development is presented in the fields whereshortage of quality has been discovered. The suggestions taken together do not form a quality system butcan be looked at as ideas of approach to quality fields that have to be developed if a working quality systemshall be accomplished.Many of the quality fields that have been discussed do not have anything to do with technical qualitydirectly but are in some degree requirements for a working quality system. It also feels urgent to illustratethese fields in this exam report when most people at GD seems to place quality as identical with technicalquality. Technical quality is also a quality field where GD-tryck has few concrete problems today and theyalready produce printed matters of a high quality. Afact that might make it difficult to adopt a quality systemas the benefits of such a system is not obvious.

MODELLING AND FORECASTING INFLATION RATES IN GHANA: AN APPLICATION OF SARIMA MODELS

Ghana faces a macroeconomic problem of inflation for a long period of time. The problem in somehow slows the economic growth in this country. As we all know, inflation is one of the major economic challenges facing most countries in the world especially those in African including Ghana. Therefore, forecasting inflation rates in Ghana becomes very important for its government to design economic strategies or effective monetary policies to combat any unexpected high inflation in this country. This paper studies seasonal autoregressive integrated moving average model to forecast inflation rates in Ghana. Using monthly inflation data from July 1991 to December 2009, we find that ARIMA (1,1,1)(0,0,1)12 can represent the data behavior of inflation rate in Ghana well. Based on the selected model, we forecast seven (7) months inflation rates of Ghana outside the sample period (i.e. from January 2010 to July 2010). The observed inflation rate from January to April which was published by Ghana Statistical Service Department fall within the 95% confidence interval obtained from the designed model. The forecasted results show a decreasing pattern and a turning point of Ghana inflation in the month of July.

Conceptual Product Development in Small Corporations

The main objective of the thesis “Conceptual Product Development in Small Corporations” is by the use of a case study test the MFD™-method (Erixon G. , 1998) combined with PMM in a product development project. (Henceforth called MFD™/PMM-method). The MFD™/PMM-method used for documenting and controlling a product development project has since it was introduced been used in several industries and projects. The method has been proved to be a good way of working with the early stages of product development, however, there are almost only projects carried out on large industries which means that there are very few references to how the MFD™/PMM-method works in a small corporation. Therefore, was the case study in the thesis “Conceptual Product Development in Small Corporations” carried out in a small corporation to find out whether the MFD™/PMM-method also can be applied and used in such a corporation.The PMM was proposed in a paper presented at Delft University of Technology in Holland 1998 by the author and Gunnar Erixon. (See appended paper C: The chart of modular function deployment.) The title “The chart of modular function deployment” was later renamed as PMM, Product Management Map. (Sweden PreCAD AB, 2000). The PMM consists of a QFD-matrix linked to MIM (Module Indication Matrix) via a coupling matrix which makes it possible to make an unbroken chain from the customer domain to the designed product/modules. The PMM makes it easy to correct omissions made in creating new products and modules.In the thesis “Conceptual Product Development in Small Corporations” the universal MFD™/PMM-method has been adapted by the author to three models of product development; original-, evolutionary- and incremental development.The evolutionary adapted MFD™/PMM-method was tested as a case study at Atlings AB in the community Ockelbo. Atlings AB is a small corporation with a total number of 50 employees and an annual turnover of 9 million €. The product studied at the corporation was a steady rest for supporting long shafts in turning. The project team consisted of management director, a sales promoter, a production engineer, a design engineer and a workshop technician, the author as team leader and a colleague from Dalarna University as discussion partner. The project team has had six meetings.The project team managed to use MFD™ and to make a complete PMM of the studied product. There were no real problems occurring in the project work, on the contrary the team members worked very well in the group, having ideas how to improve the product. Instead, the challenge for a small company is how to work with the MFD™/PMM-method in the long run! If the MFD™/PMM-method is to be a useful tool for the company it needs to be used continuously and that requires financial and personnel resources. One way for the company to overcome the probable lack of recourses regarding capital and personnel is to establish a good cooperation with a regional university or a development centre.

Det är värre att inte börja studera än att hoppa av: En fenomenologisk studie om hur icke traditionella studenter upplever studieavhopp från högskoleutbildning

In Sweden we have the highest rate of nontraditional students among Europe. Coincidently, we also have the highest rates of drop outs among OECD. In this particular field, drop out from higher education, there is a need fore more qualitative studies that can support the "statistics". Studies about experiences of drop outs are significant for society, university and individual. The aim of this study is to describe and understand how nontraditional student experiences drop out from higher education. What do they tell regarding their meeting with the university? How is the drop out visible before the decision to quit? How can the way forward to the drop out be described? What does the university mean for them? The theoretical point of departure is the concept lifeworld and the method is phenomenological hermeneutic with narrative interviews with 5 students. The result points out that the meeting with the university implies a meeting with other individuals, and also a "meeting" within the student himself, by inner questioning and reflection. The students’ relationship to the studies is characterized by the experience of understanding. The dropouts are visible through different events. The decision per se has increased over time and the students have also grown personally by the decision. To understand or not understand is crucial for the experience of learning. The drop out can also be seen as a transition and a turning point. The drop out is an effort and takes place without professional staff, therefore needs to be discussed in public.

Mässingslegeringar med låg blyhalt för svarvade komponenter ämnade för dricksvatten

This thesis is about brass alloys with low lead levels for manufacturing of turned components destined for human consumption. Is it technically possible, economically viable and environmentally necessary to produce lead-free brass alloys? Turning tests and leaching tests has been carried out in low-lead brass. The result of the tests carried out show that it is technically possible to produce faucets in low-leaded brass, but since these alloys are harder and less ductile, it takes more power and more cooling when it is processed. There should be more reality-based tests in regular machines that belong in the line of manufacturing. Tests is needed to find out which tool materials, cutting angles, cooling, etc. which are needed to manufacture products with the right surface, dimensions, durability, etc. One thing that no one knows today is the lifetime of a faucet made of low-lead brass. If these faucet’s do not have a higher life than that made in CW 602 N, it is a major strain on nature to produce these in low-lead brass, then to maintain production of the faucets as it is today. No information has come from the Boverket of tougher requirements for lead content in brass. This makes it difficult to know how much effort that is needed to replace lead. A legal requirement or to lose market areas is otherwise a good motivation to move forward.

Thick viewing : empirical examples of condensed moments of narrative impact in fiction film developing theoretical concepts for intensified engagements

Abstract  In a case study about viewing habits in a Swedish audience I sampled 309 questionnaires; interviews with five focus group were conducted together with ten in-depth individual interviews discussing altogether fifteen favorite films exploring specific scenes of idiosyncratic relevance.  The outcome supports claims about viewers as active and playful (cf. Höijer 1998, Frampton 2006, Hoover 2006, Plantinga 2009). In line with mediatization theory I also argue that spiritual meaning making takes place through mediated experiences and I support theories about fiction films as important sources for moral and spiritual reflection (Partridge 2004, Zillman 2005, Lynch 2007, Plantinga 2009). What Hjarvard calls the soft side of mediatization processes (2008) is illustrated showing adults experiencing enchantment through favorite films (Jerslev 2006, Partridge 2008, Klinger 2008, Oliver & Hartmann 2010).  Vernacular meaning making embedded in everyday life and spectators dealing with fiction narratives such as Gladiator, Amelie from Montmartre or Avatar highlights the need for a more nuanced understanding of elevated cinematic experiences. The reported impact of specific movies is analyzed through theories where cognition and affect are central aspects of spectators’ engagements with a film (Tan 1996, Caroll 1999, Grodal 2009). Crucially important are theories of meaning-making where viewers’ detailed interpretation of specific scenes are embedded in high-level meaning-making where world view issues and spectators’ moral frameworks are activated (Zillman 2005, Andersson & Andersson 2005, Frampton 2006, Lynch 2007, Avila 2007, Axelson 2008, Plantinga 2009).  Also results from a growing body of empirical oriented research in film studies are relevant with an interest in what happens with the flesh and blood spectator exposed to filmic narratives (Jerslev 2006, Klinger 2008, Barker 2009, Suckfüll 2010, Oliver & Hartmann 2010). Analyzing the qualitative results of my case study, I want to challenge the claim that the viewer has to suspend higher order reflective cognitive structures in order to experience suture (Butler & Palesh 2004). What I find in my empirical examples is responses related to spectators’ highest levels of mental activity, all anchored in the sensual-emotional apparatus (Grodal 2009). My outcome is in line with a growing number of empirical case studies which support conclusions that both thinking and behavior are affected by film watching (Marsh 2007, Sückfull 2010, Oliver & Hartmann 2010, Axelson forthcoming). The presentation contributes to a development of concepts which combines aesthetic, affective and cognitive components in an investigation of spectator’s moves from emotional evaluation of intra-text narration to extra-textual assessments, testing the narrative for larger significance in idiosyncratic ways (Bordwell & Thompson 1997, Marsh 2007, Johnston 2007, Bruun Vaage 2009, Axelson 2011). There are a several profitable concepts suggested to embrace the complex interplay between affects, cognition and emotions when individuals respond to fictional narratives. Robert K. Johnston label it “deepening gaze” (2007: 307) and “transformative viewing” (2007: 305). Philosopher Mitch Avila proposes “high cognition” (2007: 228) and Casper Thybjerg ”higher meaning” (2008: 60). Torben Grodal talks about “feelings of deep meaning” (Grodal 2009: 149). With a nod to Clifford Geertz, Craig Detweiler adopts “thick description” (2007: 47) as do Kutter Callaway altering it to ”thick interpretations” (Callaway 2013: 203).  Frampton states it in a paradox; ”affective intelligence” (Frampton 2006: 166). As a result of the empirical investigation, inspired by Geertz, Detweiler & Callaway, I advocate thick viewing for capturing the viewing process of these specific moments of film experience when profound and intensified emotional interpretations take place. The author As a sociologist of religion, Tomas Axelsons research deals with people’s use of mediated narratives to make sense of reality in a society characterized by individualization, mediatization and pluralized world views.  He explores uses of fiction film as a resource in every day life and he is currently finishing his three year project funded by the Swedish Research Council: Spectator engagement in film and utopian self-reflexivity. Moving Images and Moved Minds. http://www.du.se/sv/AVM/Personal/Tomas-Axelson Bibliography Axelson, T. (Forthcoming 2014). Den rörliga bildens förmåga att beröra.[1] Stockholm: Liber Axelson, T. (In peer review). Vernacular Meaning Making. Examples of narrative impact in fiction film questioning the ’banal’ notion in mediatization theory. Nordicom Review. Nordicom Göteborg. Axelson, T. (2011). Människans behov av fiktion. Den rörliga bildens förmåga att beröra människan på djupet.[2]Kulturella perspektiv. Volume 2. Article retrieved from www.kultmed.umu.se/digitalAssets/74/74304_axelson-22011.pdf Axelson, Tomas (2010) “Narration, Visualization and Mind. Movies in everyday life as a resource for utopian self-reflection.” Paper presentation at CMRC, 7th Conference of Media, Religion & Culture in Toronto, Canada 9 – 13th August 2010. Axelson, Tomas (2008) Movies and Meaning. Studying Audience, Favourite Films and Existential Matters. Particip@tions : Journal of Audience and Reception Studies. Volume 5, (1). Doctoral dissertation summary. ACTA UNIVERSITATIS UPSALIENSIS. Article retrieved from http://www.participations.org/Volume%205/Issue%201%20-%20special/5_01_axelson.htm  [1] English translation: Moving Images and Moved Minds. [2] English translation: Our need for fiction. Deeply Moved by Moving Images. Cultural Perspectives.

Gli studi italiani sulla regina Cristina di Svezia negli ultimi cinquant'anni

Queen Christina of Sweden (1626-1689)) is probably the most important individual to directly link the cultures of Sweden and Italy, and thus fascinate scholars over the last four centuries. In the last fifty years, research on and interest in this monarch has been particularly intense. This has led to current international scientific debate concerning all the different cultural expressions in which Queen Cristina was particularly involved. However, until now there has been lacking a comprehensive work to illustrate the development of scientific research in Italian on Queen Christina. This article, therefore, without claiming to be exhaustive, aims to fill this gap by identifying the main direction of current research. The article, after briefly introducing previous works (both Italian and Swedish), demonstrates how the first major renaissance of international studies on Queen Cristina took place in Sweden in the early 1960s. Even more important was the subsequent turning point in 1989, when the tercentenary of the death of Queen Christina was celebrated and the Azzolino Collection at the Biblioteca Comunale in Jesi was opened. The article focuses on the studies in Italian during this latter period. To make the exposition more organic and, importantly, more accessible to those readers interested in only one particular aspect of the scientific studies about Queen Christina, the studies in Italian since 1689 are divided into different subject areas.

Unga vuxnas upplevelse av sjuksköterskans bemötande av psykisk ohälsa vid kontakt med hälso- och sjukvården - en litteraturöversikt

Bakgrund: Unga vuxna som sökte vård sökte oftast inte för den psykiska ohälsan utan istället för något somatiskt. Det är viktigt att få de yngre vuxna att söka sig till vården när behov uppstår och underlätta till en god förbindelse mellan sjukvården och de unga vuxna. Syfte: Syftet med denna studie var att beskriva unga vuxnas upplevelser av sjuksköterskans bemötande av psykisk ohälsa vid kontakt med hälso- och sjukvården. Metod: Studien genomfördes som en litteraturöversikt. Resultat: För de unga vuxna var det inte lätt att komma in i vården på rätt vårdnivå om personen inte kom i kontakt med en sjuksköterska som hade ett holistiskt synsätt. Vården för de unga med psykisk ohälsa bör vara tillgänglig och informationen om tillgängligheten behöver ständigt upprepas. Slutsats: Det är viktigt att sjuksköterskor har kunskap och erfarenhet av unga psykiska människor för att kunna hjälpa dem med den psykiska ohälsan när de söker vård. Relationen mellan patienten och sjuksköterskan är av stor vikt för den fortsatta kontakten med vården för den unge vuxna. Det är viktigt att de känner tillit och förtroende.

Att bli, att vara och att ha varit - om ingångar i och utgångar ur Jehovas vittnen i Sverige

Summary To become, to be and to have been: about the  Jehovah’s Witnesses The Watchtower Bible and Tract Society, in the following text referred to as the Jehovah’s Witnesses or “the organisation”, is a worldwide Christian organisation with about 6.7 million members. The organisation has many times, without any success so far, proclaimed Armageddon when they expect Jehovah to return to Earth. They interpret the Bible in their own, often very literal way, and require their members to live according to these interpretations. Among the consequences of this, members are forbidden to vote, to do military service or to receive blood transfusions. Apart from attending the three weekly meetings, members are expected to be active in missionary work, known as “publishing”. If a member fails to do a certain number of hours’ publishing, he or she risks being deprived of active membership status Sweden in general is considered to be a society where the population is not very religious. The formerly state-governed Lutheran church has lost its influence and the vast majority of ordinary Swedes do not visit church on other occasions than weddings, funerals or christenings. Expressing one’s own religious values has become somewhat of a private matter where publicity is seldom appreciated, which is contrary to the practice of the Jehovah’s Witnesses. This is one of the reasons why the Jehovah’s Witnesses are commonly perceived by average Swedes as a “suspicious” religious organisation. The aim and methods of the study This dissertation seeks to describe and investigate the entering and leaving of a highly structured and hierarchical religious community, exemplified in this case by the Jehovah’s Witnesses. What are the thoughts and aspirations of someone who is considering becoming a Jehovah’s Witness? What are the priorities and what experiences seem important when a person is going through such a process? And when this person has finally reached his or her goal of becoming a member, is it the same motivation that makes him or her stay in the organisation for longer periods of time, possibly for the rest of their lives, or does it change during the process of entering, or does this motivation change its character during the transition from entering to being a regular member? Why do some of the members change their attitude to the Jehovah’s Witnesses from rejoicing to bitterness? And how does this process of exit manifest itself? In what way is it different from the process of entry? The respondents in this study were chosen from both active members of the Jehovah’s Witnesses in Sweden and those who have left the organisation for personal reasons. Repeated interviews with ten active members of the organisation have been conducted in the course of the study and compared to equal numbers of former members. The interviews have been semi-structured to deal with questions of how a person has come into contact with the organisation; how they retrospectively experienced the process of entry; the reasons for becoming a member. Questions have also been asked about life in the organisation. The group of “exiters” have also been asked about the experience of leaving, why they wanted to leave, and how this process was started and carried out. In addition to this I have analysed a four-year diary describing the time inside and the process of leaving the organisation. This has given me an extra psychological insight into the inner experience of someone who has gone through the whole process. The analysis has been done by categorising the content of the transcribed interviews. An attempt to outline a model of an entry and exit process has been made, based on ideas and interpretations presented in the interviews. The analysis of the diary has involved thorough reading, resulting in a division of it into four different parts, where each part has been given a certain key-word, signifying the author’s emotional state when writing it. A great deal of the information about the Jehovah’s Witnesses has been collected through discussion boards on the Internet, informal talks with members and ex-members, interviews with representatives of the organisations during visits to its different offices (Bethels), such as St. Petersburg, Russia, and Brooklyn, New York, USA. The context Each organisation evolves in its own context with its own norms, roles and stories that would not survive outside it. With this as a starting point, there is a chapter dedicated to the description of the organisation’s history, structure and activities. It has been stated that the organisation’s treatment of its critical members and the strategies for recruiting new members have evolved over the years of its history. At the beginning there was an openness allowing members to be critical. As the structure of the organisation has become more rigid and formalised, the treatment of internal critics has become much less tolerated and exclusion has become a frequent option. As a rule many new members have been attracted to the organisation when (1) the day of Armageddon has been pronounced to be approaching; (2) the members of the organisation have been persecuted or threatened with persecution; and (3) the organisation has discovered a “new market”. The processes for entering and exiting How the entering processes manifest themselves depends on whether the person has been brought up in the organisation or not. A person converting as an adult has to pass six phases before being considered a Jehovah’s Witness by the organisation. These are:  Contact with the Jehovah’s Witnesses, Studying the bible with members of the organisation, Questioning, Accepting, Being active as publisher (spreading the belief), Being baptised.  For a person brought up in the organisation, the process to full membership is much shorter:   Upbringing in the organisation, Taking a stand on the belief, Being baptised. The exit process contains of seven phases:   Different levels of doubts, Testing of doubts, Turning points, Different kinds of decisions, Different steps in executing the decisions, Floating, a period of emotional and cognitive consideration of membership and its experiences, Realtive neutrality.   The process in and the process out are both slow and are accompanied with anguish and doubts. When a person is going through the process in or out of the organisation he or she experiences criticism. This is when people around the adept question the decision to continue in the process. The result of the criticism depends on where in the process the person is. If he or she is at the beginning of the process, the criticism will probably make the person insecure and the process will slow down or stop. If the criticism is pronounced in a later phase, the process will probably speed up. The norms of the organisation affect the behaviour of the members. There are techniques for inclusion that both bind members to the organisation and shield them off from the surrounding society. Examples of techniques for inclusion are the “work situation” and “closed doors”. The work situation signifies that members who do as the organisation recommends – doing simple work – often end up in the same branch of industry as many other Jehovah’s Witnesses. This often means that the person has other witnesses as workmates. If the person is unemployed or moves to another town it is easy to find a new job through connections in the organisation. Doubts and exclusions can lead to problems since they entail a risk of losing one’s job. This can also result in problems getting a new job. Jehovah’s Witnesses are not supposed to talk to excluded members, which of course mean difficulties working together. “Closed doors” means that members who do as the organisation recommends – not pursuing higher education, not engaging in civil society, working with a manual or in other way simple job, putting much time into the organisation – will, after a long life in the organisation, have problems starting a new life outside the Jehovah’s Witnesses. The language used in the organisation shows the community among the members, thus the language is one of the most important symbols. A special way of thinking is created through the language. It binds members to the organisation and sometimes it can work as a way to get back into the normative world of the organisation. Randall Collins’s (1990, 2004) thoughts about “emotional energy” have enabled an understanding of the solidarity and unity in the organisation. This also gives an understanding of the way the members treat doubting and critical members. The members who want to exit have to open up the binding/screening off. A possible way to do that is through language, to become aware of the effect the language might have. Another way is to search for emotional energy in another situation. During the exit process, shame might be of some importance. When members become aware of the shame they feel, because they perceive they are “acting a belief”, the exit process might accelerate.

Att lämna en värld : Om utgångsprocesser ur Jehovas vittnen

It is an everyday experience to realize that things do not turn out the as expected. But what if you realize that everything you have so far experienced as reality is illusion? This article is about former members of the Jehovah’s Witnesses who have had doubts about what they previously believed to be the Truth. The article also treats the exit process, from being a Jehovah’s Witness to becoming an ex-Jehovah’s Witness. The data consists of twenty qualitative interviews with ten Jehovah’s Witnesses and twenty qualitative interviews with ten former Jehovah’s Witnesses. The data also include a diary written during four years preceding an exit from the organization. The analysis was made through thematic concentration. Ontologically the analysis and the article are based on a constructionist view though it is mainly empirical with no further theoretical assessment. However, to be able to understand the results a contextual frame is sketched with two factors affecting members who make an exit. First there are tying factors that bind the person closer to the organization; these are closeness and friendship and confirmation. A secluding factor is something that secludes the member from the outside society; these factors are the work situation and »closed doors«. With high values on these factors the exit process will be more arduous. The results are presented through a process model in which different phases or steps in the exit process are described. The following steps in the process are: (1) different levels of doubts; (2) trying out doubts; (3) turning points; (4) different decisions; (5) different steps in execution; (6) floating; (7) relative neutrality. The process is defined as an altogether ambivalent and emotionally tough experience, but other parts of life may be affected as well, such as employment, social life, family life and career.

Towards Presidential Rule in Ukraine : Hybrid Regime Dynamics under Semi-Presidentialism

This article sets out to analyse recent regime developments in Ukraine in relation to semi-presidentialism. The article asks: to what extent and in what ways theoretical arguments against semi-presidentialism (premier-presidential and president-parliamentary systems) are relevant for understanding the changing directions of the Ukrainian regime since the 1990s? The article also reviews the by now overwhelming evidence suggesting that President Yanukovych is turning Ukraine into a more authoritarian hybrid regime and raises the question to what extent the president-parliamentary system might serve this end. The article argues that both kinds of semi-presidentialism have, in different ways, exacerbated rather than mitigated institutional conflict and political stalemate. The return to the president-parliamentary system in 2010 – the constitutional arrangement with the most dismal record of democratisation – was a step in the wrong direction. The premier-presidential regime was by no means ideal, but it had at least two advantages. It weakened the presidential dominance and it explicitly anchored the survival of the government in parliament. The return to the 1996 constitution ties in well with the notion that President Viktor Yanukovych has embarked on an outright authoritarian path.