Evaluation of galling resistance for some selected combinations of tool steels/stainless steel sheet materials/lubricants using pin-on-disc testing

Stainless steels are well known to be prone to cold welding and material transfer in sliding contacts and therefore difficult to cold form unless certain precautions as discussed in this paper are taken. In the present study different combinations of tool steels/stainless steels/lubricants has been evaluated with respect to their galling resistance using pin-on-disc testing. The results show that a high galling resistance is favored by a high stainless steel sheet hardness and a blasted stainless steel sheet surface topography. The effect of type of lubricant was found to be more complex. For example, the chlorinated lubricants failed to prevent metal-to-metal contact on a brushed sheet surface but succeeded on a blasted sheet surface of the same stainless steel material. This is believed to be due to a protective tribofilm which is able to form on the blasted surface, but not on the brushed surface.

Minimization of stock weight during close-die forging of a spindle

In this paper, Finite Element method and full-scale experiments have been used to study a hot forging method for fabri-cation of a spindle using reduced initial stock size. The forging sequence is carried out in two stages. In the first stage, the hot rolled cylindrical billet is pre-formed and pierced in a closed die using a spherical nosed punch to within 20 mm of its base. This process of piercing or impact extrusion leads to high strains within the work piece but requires high press loads. In the second stage, the resulting cylinder is placed in a die with a flange chamber and upset forged to form a flange. The stock mass is optimized for complete die filling. Process parameters such as effective strain distribution, material flow and forging load in different stages of the process are analyzed. It is concluded from the simulations that minor modifications of piercing punch geometry to reduce contact between the punch and emerging vertical walls of the cylinder appreciably reduces the piercing load. In the flange chamber, a die surfaces angle of 52° instead of 45° is pro-posed to ensure effective material flow and exert sufficient tool pressure to achieve complete cavity filling. In order to achieve better compression, it is also proposed to shorten both the length of the inserted punch and the die “tongues” by a few mm.

Med rena händer i kampen mot VRI : Sjuksköterskors följsamhet till riktlinjer om handhygien: främjande och hindrande faktorer En litteraturöversikt

Bakgrund: Uppkomsten av vårdrelaterade infektioner (VRI) är ett globalt problem. Den vanligaste smittvägen är via personalens händer. Bra handhygien är väsentligt för att minska VRI. Med bättre följsamhet till handhygien kan uppkomsten av VRI minskas, därför har forskning om följsamhet till handhygien och faktorer som inverkar, stort betydelse. Syfte: Syftet var att sammanställa och beskriva aktuell forskning om sjuksköterskors följsamhet till handhygien och vilka faktorer främjar respektive hindrar följsamheten till handhygien. Metod: En litteraturöversikt som baserades på artiklar publicerade de senaste fem åren, från länder som följer Världshälsoorganisationens (WHO) handhygieniska riktlinjer. Sexton artiklar valdes efter kvalitetsgranskning för analys och beskrivning. Artiklarna bearbetades med innehållsanalys. Resultat: Sjuksköterskors följsamhet till handhygien var låg. Följande främjande faktorer identifierades: handhygien efter patientkontakt, materialtillgång, förebilder, utbildning, verbala och visuella påminnelser, positiva individuella attityder, kvinnlig könstillhörighet, yrkesgrupp, specialitet, patientens skydd, arbetskultur och samhällets inställning till handhygien. Följande hindrande faktorer identifierades: hög arbetsbelastning, bristande utbildning, kunskapsbrist, individuella attityder, hudpåverkan, materialtillgång, arbetskultur och samhällets inställning till handhygien, manlig könstillhörighet, yrkesgrupp, specialitet. Slutsats: Enligt resultat rekommenderas: samspelet med kollegor och patienter, stöd av teamarbete ledare, förebilder, materialtillgång, utbildning, påminnelser, intervention med tillgång till information, stöd, resurser och möjligheter för regelbunden kunskapsuppföljning, motivera till handhygien före patientkontakt, involvera patienter.

Upplevelser av stöd från diabetessjuksköterskan hos personer med diabetes typ 1 : – Sekundäranalys av en kvalitativ intervjustudie

Introduction: Type 1 diabetes is a chronic disease that affects the individual in everyday life. The diabetes team sets the treatment goals together with the patient aiming for a good quality of life and to prevent complications. The diabetes nurse should include in-depth knowledge of the daily life of people with diabetes, and have respect for the individual's choices and life situation. Aim: To describe how people with type 1 diabetes experience the support from the diabetes nurse. Method: A qualitative content analysis with an inductive approach has been used. A secondary analysis including semi-structured interviews with 15 adults (> 18 years) with type 1 diabetes was conducted. Result: The result was summarized with an overall theme "At the clinic - experience of the support offered" describes how people experience the support from their diabetes nurse. The theme constituted three categories "Access to the diabetes nurse", "The diabetes nurse - a source of information and knowledge that might need to be complemented with the support from other professionals" and,"Mutual trust - the patient's experience of the district nurse as a discussion partner and support". Conclusion: The results showed that the accessibility to diabetes nurses was experienced as good. It was simple and easy to make contact. The diabetes nurses were experienced to be engaged and provide good support to the patients. A good dialogue with the diabetes nurse and commitment from the diabetes nurse were mentioned as important factors that made the visits to be experienced as good and important. There were requests for greater access and expanded opportunities for help from counselors, as well as an increased focus on how the person is feeling.

Parent’s experiences of feeding their preterm infant in Neonatal Units in Sweden. : Ethnographic design

Introduction: Studies have shown that having a preterm infant may cause stress and powerlessness for parents. It is important to support parents around the feeding situation, and that the Neonatal Intensive Care Unit (NICU) has appropriate space and place to help the family to bond to each other. For the healthcare professionals it is important to promote skin-to-skin contact and breastfeeding; particularly for preterm infants. There are many studies on parent’s experiences of NICUs and a few studies on parent’s experiences of feeding their infant in the NICU. Objective: The objective of this study was to explore parents experiences of feeding their infant in the NICU. Design: The study was conducted using an ethnographic design. Results: A global theme of ‘The journey in feeding’ was developed from four organising themes: ‘Ways of infant feeding’; ‘Environmental influences’; ‘Relationships’ and ‘Emotional factors’. These themes illustrate the challenges mothers reported with different methods of feeding. The environment had a big impact on parent’s experiences of infant feeding. Some mothers felt that breastfeeding seemed unnatural because their infant was so tiny but breastfeeding and skin-to-skin contact helped them to bond to their infant. The mothers thought it was difficult to keep up with the milk production by only pumping. Routines were not inviting parents to find their own rhythm. They also felt stressed about the weighing. Healthcare professionals had positive and negative influences on the parents. Conclusions: This study demonstrates that while all parents expressed the wish to breastfeed, their ‘journey in feeding’ was highly influenced by method of feeding, environmental, relational and emotional factors. The general focus upon routines and assessing milk intake generated anxiety and reduced relationality. Midwives and neonatal nurses need to ensure that they emphasise and support the relational aspects of parenting and avoid over-emphasising milk intake and associated progress of the infant