Optimal V. O2max-to-mass ratio for predicting 15 km performance among elite male cross-country skiers

The aim of this study was 1) to validate the 0.5 body-mass exponent for maximal oxygen uptake (V. O2max) as the optimal predictor of performance in a 15 km classical-technique skiing competition among elite male cross-country skiers and 2) to evaluate the influence of distance covered on the body-mass exponent for V. O2max among elite male skiers. Twenty-four elite male skiers (age: 21.4±3.3 years [mean ± standard deviation]) completed an incremental treadmill roller-skiing test to determine their V. O2max. Performance data were collected from a 15 km classicaltechnique cross-country skiing competition performed on a 5 km course. Power-function modeling (ie, an allometric scaling approach) was used to establish the optimal body-mass exponent for V . O2max to predict the skiing performance. The optimal power-function models were found to be race speed = 8.83⋅(V . O2max m-0.53) 0.66 and lap speed = 5.89⋅(V . O2max m-(0.49+0.018lap)) 0.43e0.010age, which explained 69% and 81% of the variance in skiing speed, respectively. All the variables contributed to the models. Based on the validation results, it may be recommended that V. O2max divided by the square root of body mass (mL⋅min−1 ⋅kg−0.5) should be used when elite male skiers’ performance capability in 15 km classical-technique races is evaluated. Moreover, the body-mass exponent for V . O2max was demonstrated to be influenced by the distance covered, indicating that heavier skiers have a more pronounced positive pacing profile (ie, race speed gradually decreasing throughout the race) compared to that of lighter skiers.

Children's recall of words spoken in their first and second language : Effects of Signal-to-Noise Ratio and Reverberation Time

Speech perception runs smoothly and automatically when there is silence in the background, but when the speech signal is degraded by background noise or by reverberation, effortful cognitive processing is needed to compensate for the signal distortion. Previous research has typically investigated the effects of signal-to-noise ratio (SNR) and reverberation time in isolation, whilst few have looked at their interaction. In this study, we probed how reverberation time and SNR influence recall of words presented in participants' first- (L1) and second-language (L2). A total of 72 children (10 years old) participated in this study. The to-be-recalled wordlists were played back with two different reverberation times (0.3 and 1.2 s) crossed with two different SNRs (+3 dBA and +12 dBA). Children recalled fewer words when the spoken words were presented in L2 in comparison with recall of spoken words presented in L1. Words that were presented with a high SNR (+12 dBA) improved recall compared to a low SNR (+3 dBA). Reverberation time interacted with SNR to the effect that at +12 dB the shorter reverberation time improved recall, but at +3 dB it impaired recall. The effects of the physical sound variables (SNR and reverberation time) did not interact with language. © 2016 Hurtig, Keus van de Poll, Pekkola, Hygge, Ljung and Sörqvist.

Marxist Comrades or Capitalist Pigs? : From Musical Proletarians to Musical Capitalists in Roddy Doyle's The Commitments

Marxist themes of Roddy Doyle’s The Commitments have not often been looked at. Yet, they are decidedly prominent. The band make use of a Marxist image and of collectivist easy-played, easily-understood music in order to gain working class listeners. In fact, the band itself is based on an egalitarian structure, until it, due to an increasing individualist wish for success, falls apart. The aim of this essay is thus to argue, through pointing to the Marxist rhetoric of the band and the hypocrisy around it, and through a comparative reading between The Commitments and Orwell’s Animal Farm, that The Commitments has an allegorical value, much like Animal Farm does, when it comes to depicting the way Marxism has worked and failed as it has been practised in reality.

BEE COLONIES APPLIED TO MULTIPROCESSOR SCHEDULING

In order to achieve the high performance, we need to have an efficient scheduling of a parallelprogram onto the processors in multiprocessor systems that minimizes the entire executiontime. This problem of multiprocessor scheduling can be stated as finding a schedule for ageneral task graph to be executed on a multiprocessor system so that the schedule length can be minimize [10]. This scheduling problem is known to be NP- Hard.In multi processor task scheduling, we have a number of CPU’s on which a number of tasksare to be scheduled that the program’s execution time is minimized. According to [10], thetasks scheduling problem is a key factor for a parallel multiprocessor system to gain betterperformance. A task can be partitioned into a group of subtasks and represented as a DAG(Directed Acyclic Graph), so the problem can be stated as finding a schedule for a DAG to beexecuted in a parallel multiprocessor system so that the schedule can be minimized. Thishelps to reduce processing time and increase processor utilization. The aim of this thesis workis to check and compare the results obtained by Bee Colony algorithm with already generatedbest known results in multi processor task scheduling domain.

The Evolution of a Responsibility to Protect in Africa : The African Unions Emerging Peace and Security Regime

The thesis focuses on, and tries to evaluate, the role that the African Union (AU) plays in protecting the peace and security on the African continent. The thesis takes an interdisciplinary approach to the topic by both utilizing international relations and international law theories. The two disciplines are combined in an attempt to understand the evolution of the AU’s commitment to the pragmatist doctrine: responsibility to protect (R2P). The AU charter is considered to be the first international law document to cover R2P as it allows the AU to interfere in the internal affairs of its member states. The R2P doctrine was evolved around the notion of a need to arrive at a consensus in regard to the right to intervene in the face of humanitarian emergencies. A part of the post-Cold War shift in UN behaviour has been to support local solutions to local problems. Hereby the UN acts in collaboration with regional organizations, such as the AU, to achieve the shared aspirations to maintain international peace and security without getting directly involved on the ground. The R2P takes a more holistic and long-term approach to interventions by including an awareness of the need to address the root causes of the crisis in order to prevent future resurrections of conflicts. The doctrine also acknowledges the responsibility of the international community and the intervening parties to actively participate in the rebuilding of the post-conflict state. This requires sustained and well planned support to ensure the development of a stable society.While the AU is committed to implementing R2P, many of the AU’s members are struggling, both ideologically and practically, to uphold the foundations on which legitimate intervention rests, such as the protection of human rights and good governance. The fact that many members are also among the poorest countries in the world adds to the challenges facing the AU. A lack of human and material resources leads to a situation where few countries are willing, or able, to support a long-term commitment to humanitarian interventions. Bad planning and unclear mandates also limit the effectiveness of the interventions. This leaves the AU strongly dependent on regional powerbrokers such as Nigeria and South Africa, which in itself creates new problems in regard to the motivations behind interventions. The current AU charter does not provide sufficient checks and balances to ensure that national interests are not furthered through humanitarian interventions. The lack of resources within the AU also generates worries over what pressure foreign nations and other international actors apply through donor funding. It is impossible for the principle of “local solutions for local problems? to gain ground while this donor conditionality exists.The future of the AU peace and security regime is not established since it still is a work in progress. The direction that these developments will take depends on a wide verity of factors, many of which are beyond the immediate control of the AU.

The functions of intermediaries in Swedish SMEs internationalization to the Nigerian market

Over the years so many academic literatures has revealed that increased number of firms have seen internationalization as a means to gain and sustain competitive advantage and even increase economic of scale, and this has led many western companies to emerging markets. In this paper we discovered that among the pool of Swedish firms, only the MNEs have seen Nigerian market attractive to internationalize to, but just a few of the Swedish SMEs has expanded to the Nigerian market. This research was conducted by doing a qualitative study with the use of phenomenological research approach, during our investigation on the functions of intermediaries in Swedish SMEs internationalization to Nigeria market.Furthermore, we were able to understand the importance and functions of the different marketing intermediaries’ in Swedish SMEs internationalization to Nigeria market. These intermediaries equip the Swedish firms with the required objective knowledge of the Nigerian market, updating them with recent development of the opportunities and threats involved in the Nigerian marketing environment, and linking these Swedish firms to the required government departments, distributors, agent/broker, customers, middle men etc, thereby impacting them with the experiential knowledge. Moreover, it is important for firms to have objective or pre-market knowledge of a particular market before entering that market, but this knowledge is regarded as non-helpful knowledge to firms. But the experiential knowledge is acquired over time in the market, which is regarded as the helpful knowledge. It is evident that the intermediaries equip these firms with both objective and experiential knowledge.Although the opportunities in some emerging markets are very attractive, but the threats in these markets are other factors firms also put into consideration before internationalizing to these markets. This is why thorough market research has to be done so that firms can create effective marketing strategies when they want to expand their marketing activities to emerging markets. Despite the risk and uncertainties involved in doing business in foreign countries, still yet companies selling global products do not have any choice than to internationalize their marketing operations.

Buried screen-printed contacts for silicon solar cells

A Simple way to improve solar cell efficiency is to enhance the absorption of light and reduce the shading losses. One of the main objectives for the photovoltaic roadmap is the reduction of metalized area on the front side of solar cell by fin lines. Industrial solar cell production uses screen-printing of metal pastes with a limit in line width of 70-80 μm. This paper will show a combination of the technique of laser grooved buried contact (LGBC) and Screen-printing is able to improve in fine lines and higher aspect ratio. Laser grooving is a technique to bury the contact into the surface of silicon wafer. Metallization is normally done with electroless or electrolytic plating method, which a high cost. To decrease the relative cost, more complex manufacturing process was needed, therefore in this project the standard process of buried contact solar cells has been optimized in order to gain a laser grooved buried contact solar cell concept with less processing steps. The laser scribing process is set at the first step on raw mono-crystalline silicon wafer. And then the texturing etch; phosphorus diffusion and SiNx passivation process was needed once. While simultaneously optimizing the laser scribing process did to get better results on screen-printing process with fewer difficulties to fill the laser groove. This project has been done to make the whole production of buried contact solar cell with fewer steps and could present a cost effective opportunity to solar cell industries.

Electrical Evaluation of a Low Concentrating PVT Collector Based on Performance Ratio

Photovoltaic Thermal/Hybrid collectors are an emerging technology that combines PV and solar thermal collectors by producing heat and electricity simultaneously. In this paper, the electrical performance evaluation of a low concentrating PVT collector was done through two testing parts: power comparison and performance ratio testing. For the performance ratio testing, it is required to identify and measure the factors affecting the performance ratio on a low concentrating PVT collector. Factors such as PV cell configuration, collector acceptance angle, flow rate, tracking the sun, temperature dependence and diffuse to irradiance ratio. Solarus low concentrating PVT collector V12 was tested at Dalarna University in Sweden using the electrical equipment at the solar laboratory. The PV testing has showed differences between the two receivers. Back2 was producing 1.8 energy output more than Back1 throughout the day. Front1 and Front2 were almost the same output performance. Performance tests showed that the cell configuration for Receiver2 with cells grouping (6- 32-32-6) has proved to have a better performance ratio when to it comes to minimizing the shading effect leading to more output power throughout the day because of lowering the mismatch losses. Different factors were measured and presented in this thesis in chapter 5. With the current design, it has been obtained a peak power at STC of 107W per receiver. The solar cells have an electrical efficiency of approximately 19% while the maximum measured electrical efficiency for the collector was approximately 18 % per active cell area, in addition to a temperature coefficient of -0.53%/ ˚C. Finally a recommendation was done to help Solarus AB to know how much the electrical performance is affected during variable ambient condition and be able to use the results for analyzing and introducing new modification if needed.