Integration av webbaserat analysprogram och kartprogram : Integration of web based analysis-software andmap-software

I takt med att GIS (Grafiska InformationsSystem) blir allt vanligare och mer användarvänligt har WM-data sett att kunder skulle ha intresse i att kunna koppla information från sin verksamhet till en kartbild. Detta för att lättare kunna ta till sig informationen om hur den geografiskt finns utspridd över ett område för att t.ex. ordna effektivare tranporter. WM-data, som det här arbetet är utfört åt, avser att ta fram en prototyp som sedan kan visas upp för att påvisa för kunder och andra intressenter att detta är möjligt att genomföra genom att skapa en integration mellan redan befintliga system. I det här arbetet har prototypen tagits fram med skogsindustrin och dess lager som inriktning. Befintliga program som integrationen ska skapas mellan är båda webbaserade och körs i en webbläsare. Analysprogrammet som ska användas heter Insikt och är utvecklat av företaget Trimma, kartprogrammet heter GIMS som är WM-datas egna program. Det ska vara möjligt att i Insikt analysera data och skapa en rapport. Den ska sedan skickas till GIMS där informationen skrivs ut på kartan på den plats som respektive information hör till. Det ska även gå att välja ut ett eller flera områden i kartan och skicka till Insikt för att analysera information från enbart de utvalda områdena. En prototyp med önskad funktionalitet har under arbetets gång tagits fram, men för att ha en säljbar produkt är en del arbeta kvar. Prototypen har visats för ett antal intresserade som tyckte det var intressant och tror att det är något som skulle kunna användas flitigt inom många områden.

System Integration of PV/T Collectors in Solar Cooling Systems

The demand for cooling and air-conditioning of building is increasingly ever growing. This increase is mostly due to population and economic growth in developing countries, and also desire for a higher quality of thermal comfort. Increase in the use of conventional cooling systems results in larger carbon footprint and more greenhouse gases considering their higher electricity consumption, and it occasionally creates peaks in electricity demand from power supply grid. Solar energy as a renewable energy source is an alternative to drive the cooling machines since the cooling load is generally high when solar radiation is high. This thesis examines the performance of PV/T solar collector manufactured by Solarus company in a solar cooling system for an office building in Dubai, New Delhi, Los Angeles and Cape Town. The study is carried out by analyzing climate data and the requirements for thermal comfort in office buildings. Cooling systems strongly depend on weather conditions and local climate. Cooling load of buildings depend on many parameters such as ambient temperature, indoor comfort temperature, solar gain to the building and internal gains including; number of occupant and electrical devices. The simulations were carried out by selecting a suitable thermally driven chiller and modeling it with PV/T solar collector in Polysun software. Fractional primary energy saving and solar fraction were introduced as key figures of the project to evaluate the performance of cooling system. Several parametric studies and simulations were determined according to PV/T aperture area and hot water storage tank volume. The fractional primary energy saving analysis revealed that thermally driven chillers, particularly adsorption chillers are not suitable to be utilizing in small size of solar cooling systems in hot and tropic climates such as Dubai and New Delhi. Adsorption chillers require more thermal energy to meet the cooling load in hot and dry climates. The adsorption chillers operate in their full capacity and in higher coefficient of performance when they run in a moderate climate since they can properly reject the exhaust heat. The simulation results also indicated that PV/T solar collector have higher efficiency in warmer climates, however it requires a larger size of PV/T collectors to supply the thermally driven chillers for providing cooling in hot climates. Therefore using an electrical chiller as backup gives much better results in terms of primary energy savings, since PV/T electrical production also can be used for backup electrical chiller in a net metering mechanism.

Flyktingguide: En väg till integration? : Brukarutvärdering av projektet Flyktingguide i Falun

In this qualitative user evaluation participants in the project refugee guide, Falun, was interviewed about their experience of the project and how the project contributed to their integration into society and establishment on the labor market. The collection of empirical data has been made by six interviews. The results of the evaluation indicate that participants feel that they through the project had the opportunity to meet new people, practice the language and learn about each other's culture. The results also show that participants are satisfied with the project. Some participants expressed a desire to meet with several people at once while others don´t have that need. Furthermore, the interviews shows that establishment on labor market occurred through job placement and not through participation in the project. Integration proved to be a difficult concept to define, but the interviews show that the participants have a perception that it is about learning the Swedish language and culture.