5 resultados para Yttrial-stabilized zirconia films
em Dalarna University College Electronic Archive
Resumo:
The submerged entry nozzle (SEN) is used to transport the molten steel from a tundish to a mould. The main purpose of its usage is to prevent oxygen and nitrogen pick-up by molten steel from the gas. Furthermore, to achieve the desired flow conditions in the mould. Therefore, the SEN can be considered as a vital factor for a stable casting process and the steel quality. In addition, the steelmaking processes occur at high temperatures around 1873 K, so the interaction between the refractory materials of the SEN and molten steel is unavoidable. Therefore, the knowledge of the SEN behaviors during preheating and casting processes is necessary for the design of the steelmaking processes The internal surfaces of modern SENs are coated with a glass/silicon powder layer to prevent the SEN graphite oxidation during preheating. The effects of the interaction between the coating layer and the SEN base refractory materials on clogging were studied. A large number of accretion samples formed inside alumina-graphite clogged SENs were examined using FEG-SEM-EDS and Feature analysis. The internal coated SENs were used for continuous casting of stainless steel grades alloyed with Rare Earth Metals (REM). The post-mortem study results clearly revealed the formation of a multi-layer accretion. A harmful effect of the SENs decarburization on the accretion thickness was also indicated. In addition, the results indicated a penetration of the formed alkaline-rich glaze into the alumina-graphite base refractory. More specifically, the alkaline-rich glaze reacts with graphite to form a carbon monoxide gas. Thereafter, dissociation of CO at the interface between SEN and molten metal takes place. This leads to reoxidation of dissolved alloying elements such as REM (Rare Earth Metal). This reoxidation forms the “In Situ” REM oxides at the interface between the SEN and the REM alloyed molten steel. Also, the interaction of the penetrated glaze with alumina in the SEN base refractory materials leads to the formation of a high-viscous alumina-rich glaze during the SEN preheating process. This, in turn, creates a very uneven surface at the SEN internal surface. Furthermore, these uneven areas react with dissolved REM in molten steel to form REM aluminates, REM silicates and REM alumina-silicates. The formation of the large “in-situ” REM oxides and the reaction of the REM alloying elements with the previously mentioned SEN´s uneven areas may provide a large REM-rich surface in contact with the primary inclusions in molten steel. This may facilitate the attraction and agglomeration of the primary REM oxide inclusions on the SEN internal surface and thereafter the clogging. The study revealed the disadvantages of the glass/silicon powder coating applications and the SEN decarburization. The decarburization behaviors of Al2O3-C, ZrO2-C and MgO-C refractory materials from a commercial Submerged Entry Nozzle (SEN), were also investigated for different gas atmospheres consisting of CO2, O2 and Ar. The gas ratio values were kept the same as it is in a propane combustion flue gas at different Air-Fuel-Ratio (AFR) values for both Air-Fuel and Oxygen-Fuel combustion systems. Laboratory experiments were carried out under nonisothermal conditions followed by isothermal heating. The decarburization ratio (α) values of all three refractory types were determined by measuring the real time weight losses of the samples. The results showed the higher decarburization ratio (α) values increasing for MgO-C refractory when changing the Air-Fuel combustion to Oxygen-Fuel combustion at the same AFR value. It substantiates the SEN preheating advantage at higher temperatures for shorter holding times compared to heating at lower temperatures during longer holding times for Al2O3-C samples. Diffusion models were proposed for estimation of the decarburization rate of an Al2O3-C refractory in the SEN. Two different methods were studied to prevent the SEN decarburization during preheating: The effect of an ZrSi2 antioxidant and the coexistence of an antioxidant additive and a (4B2O3 ·BaO) glass powder on carbon oxidation for non-isothermal and isothermal heating conditions in a controlled atmosphere. The coexistence of 8 wt% ZrSi2 and 15 wt% (4B2O3 ·BaO) glass powder of the total alumina-graphite refractory base materials, presented the most effective resistance to carbon oxidation. The 121% volume expansion due to the Zircon formation during heating and filling up the open pores by a (4B2O3 ·BaO) glaze during the green body sintering led to an excellent carbon oxidation resistance. The effects of the plasma spray-PVD coating of the Yttria Stabilized Zirconia (YSZ) powder on the carbon oxidation of the Al2O3-C coated samples were investigated. Trials were performed at non-isothermal heating conditions in a controlled atmosphere. Also, the applied temperature profile for the laboratory trials were defined based on the industrial preheating trials. The controlled atmospheres consisted of CO2, O2 and Ar. The thicknesses of the decarburized layers were measured and examined using light optic microscopy, FEG-SEM and EDS. A 250-290 μm YSZ coating is suggested to be an appropriate coating, as it provides both an even surface as well as prevention of the decarburization even during heating in air. In addition, the interactions between the YSZ coated alumina-graphite refractory base materials in contact with a cerium alloyed molten stainless steel were surveyed. The YSZ coating provided a total prevention of the alumina reduction by cerium. Therefore, the prevention of the first clogging product formed on the surface of the SEN refractory base materials. Therefore, the YSZ plasma-PVD coating can be recommended for coating of the hot surface of the commercial SENs.
Resumo:
Denna uppsats handlar om afrikansk film och dess relation till sina forna kolonisatörer. Eftersom filmen är ett ungt konstuttryck som dessutom är dyrt och tekniskt avancerat, så har många gånger utbildning av regissörer och finansiering skett i eller kommit från det land som länderna frigjort sig ifrån.Syftet med uppsatsen är att belysa den komplexa post-koloniala relationen mellan de gamla kolonierna och dess gamla kolonisatörer, i skapandet av afrikansk film. Jag valde ut tre afrikanska filmer vid filmfestivalen CinemAfrica i februari i Stockholm, som visar ett urval av nyproducerad afrikansk film.Uppsatsen innehåller också en överblick över hur den afrikanska filmen utvecklats fram till idag. Olika genres, innehåll och stilar beskrivs.Resultatet av studien visar att i de tre filmerna som jag har studerat, är det väldigt tydligt att regissörens bakgrund och nuvarande situation i hög grad speglar sig i filmerna. Den som utbildat sig i och fortfarande lever i Afrika har gjort en film som känns afrikansk och handlar om afrikanska problem. De andra två som levt och verkat till stor del i Europa, och finansierats av europeiska bolag, har en annan målgrupp. Deras filmer är också en blandning av afrikanskt och europeiskt innehåll och stämning.
Resumo:
Construction of identity and meaning is becoming increasingly important in both media studies and religion scholarship. (Lövheim, 2004) Meaning construction outside traditional religion has become more interesting for religious studies and what individuals in the audience do with all messages circulated through media in everyday life has attended increasing interest within media studies (Stout and Buddenbaum, 2001). Motion pictures, soap operas and advertising are all examples of media contents which generate ideas among its audience which to a various degree are used as resources within the construction of identity (Jansson, 2001). The investigation of what modern humankind’s world views look like and what components they are composed of, in this context seems to be an important topic of investigation (Holm and Björkqvist, 1996). The ways in which the development of media has effected the daily lives of individuals is interest as is the nature of the self and the ways in which the process of self-formation is affected by the profusion of mediated materials (Thompson, 1995). Film and religion are my interest within this larger frame. The topic is not exactly new but the combination of film and religion has during the last ten years resulted in a rapidly growing number of books by scholars interested in this field (Lyden, 2003). One growing focus is on the role that films can and do play within the emerging and developing valuesystem of people in the West today (Marsh, 2004). The British theologian Clive Marsh’s point of departure is very similar to my own. Viewers bring to a film life-experience, immediate concerns and worldviews and the exploration of this interplay between movies and the interpreting process of meaning making is the very focus in this paper. Theoretically, the semeiological model of Alf Linderman is combined with cultural cognitive approaches used by a number of Scandinavian media scholars developing perspectives in audience theory (Linderman, 1996, Höijer and Werner, 1998). 13 individuals, their favourite movie and what it means to them in their life My aim is to examine how individuals comprehend film and what the meaning process look like. In this paper I present the outcome of 13 interviews with young people about their favourite film. I suggest how it is possible to interpret how they interrelate film comprehension with their personal beliefs and their culturally constructed worldview from a sociocognitive point of view. Examples of films chosen range from Disneys Lion King (1994), sciencefiction and fantasy successes like The Matrix (1999) and Lord of the Rings (2001) or the next best movie ever according to www.IMdb.com The Shawshank Redemption (1994) as well as the Swedish blockbuster Så som i himmelen (2004), aka “As in Heaven”.
Resumo:
This dissertation is focused on theoretical and experimental studies of optical properties of materials and multilayer structures composing liquid crystal displays (LCDs) and electrochromic (EC) devices. By applying spectroscopic ellipsometry, we have determined the optical constants of thin films of electrochromic tungsten oxide (WOx) and nickel oxide (NiOy), the films’ thickness and roughness. These films, which were obtained at spattering conditions possess high transmittance that is important for achieving good visibility and high contrast in an EC device. Another application of the general spectroscopic ellipsometry relates to the study of a photo-alignment layer of a mixture of azo-dyes SD-1 and SDA-2. We have found the optical constants of this mixture before and after illuminating it by polarized UV light. The results obtained confirm the diffusion model to explain the formation of the photo-induced order in azo-dye films. We have developed new techniques for fast characterization of twisted nematic LC cells in transmissive and reflective modes. Our techniques are based on the characteristics functions that we have introduced for determination of parameters of non-uniform birefringent media. These characteristic functions are found by simple procedures and can be utilised for simultaneous determination of retardation, its wavelength dispersion, and twist angle, as well as for solving associated optimization problems. Cholesteric LCD that possesses some unique properties, such as bistability and good selective scattering, however, has a disadvantage – relatively high driving voltage (tens of volts). The way we propose to reduce the driving voltage consists of applying a stack of thin (~1µm) LC layers. We have studied the ability of a layer of a surface stabilized ferroelectric liquid crystal coupled with several retardation plates for birefringent color generation. We have demonstrated that in order to accomplish good color characteristics and high brightness of the display, one or two retardation plates are sufficient.