Film som kommunikation : En studie av gymnasieungdomars filmarbete

The starting point for this work was a discussion between my supervisor and myself during my teaching training. The discussion concerned the appropriateness of allowing students make films with sexual content. Film gives young people the opportunity to express their feelings and broaden their views. If the film then disseminates to unknown people via in-ternet, which it most likely will do, maybe it is no longer so positive. The aim of this study is to shed light on various aspects of identity and ethics that are important to keep in mind when young people in school make films. These aspects are to avoid making young people vulnerable to abuse and improper influence. One aim is also to highlight the advantages of making films in school. The study is inspired by hermeneutic interpretive and based on qualitative interviews. The informants are four students at the age of 18-19 at two different schools in one municipality in Sweden.The results of the study show that it is important for the informants that the films are pro-duced in an aesthetically good way so that it appeals to the audience. Two of the infor-mants have a specific audience and make more conscious choices, so that the audience will understand what is said. The study shows that the more a filmmaker considers the audi-ence, the more consciously he or she uses film as communication. To get positive feedback is important, but it is mostly friends of the filmmakers that actually comment. To get nega-tive comments is regarded as a disadvantage when placing material on the internet. Howev-er, none of the informants in the study have received negative comments on what has been posted. The opinions about what the informants believe is inappropriate to post on inter-net or to make films about regards sexuality and violations. Earlier studies show that mate-rial can, because it is interesting to other people, become widespread. For this reason it is important for teachers to have conversations with students about their preferences and opinions on various issues. Adults need to interfere in the young people's world, while be-ing open to their opinions. Then the young people's value system will be built up and give them a safe tool that helps them to avoid improper influence.

Att skola mångfalden – ett nationalistiskt försök : En analys av sverigedemokraternas diskurs om det goda samhället och den goda skolan kopplat till skolansvärdegrund

This essay attempts to examine the discourse of the Sweden democrats in relation to thevalue system of the Swedish national school.To analyse the political texts I use discourse analysis and especially the method and approachconducted by Judith Lee Bacchi. Bacchi focuses on the construction of a problem in variouspolitical discourses. When performing this kind of analysis the main question is (accordingto Bacchi): ”What is the problem represented to be?”I find that the Sweden democrats construct the ”migration politics” and the ”multiculturalpolitics” that is guiding the society as the cause of most problems in our society. To solvethe ”problems” they promote a nationalistic and a cultural racist discourse especiallypinpointing the ”Muslims” as being a problem.Since the Sweden democrats are striving to implement their discourse in the society andschool, and since their discourse already are reproduced by solar students in the classroom,I find it important to examine the essence of their particular discourse and contrast it withthe current value system of the Swedish schools.I don´t find the nationalistic and racist discourse of the Sweden democrats to correspond tothe value system of the Swedish school, mainly due to their strive to create alienation, andby labeling individuals in a reductive manner, instead of using apparent differences as asource for democratic discussions in the classroom

Patriarchal values : girls are more apt to change

Patriarchal values: girls are more apt to change How has the family value system changed between generations, especially when taking into account the gender dimension? This article presents some results from a study carried outin 2007 in one village of the Gourani tribe where the people are followers of Ahle Hagh in Islamabad Gharb (west of Iran). The differences between generations (those born and raised before and after the Islamic Revolution) in patriarchal values in the family are statistically significant. The older generation opts for the man of the family to make most of the decisions; on children’s education, marriage, naming, the families expenditure, the place for residence, the social network of the family and even the number of children. The younger generation has a different value system and it has moved towards a more egalitarian type of family. With the gender variable included in the findings we see that although the values of the younger male population have evolved toward a less patriarchal decision making structure inthe family, the degree of changes among the young women is much higher. Looking into the preferences for male sex for the first child as well as a larger number of boys in the family, the difference between generations is significant. However data on the differences analyzed with the gender variable proves that the changes concerning the equality of sexes are mainly due to drastic changes in the young women’s value system. That is, the male population, young or old, still prefer to have a boy as their first born and to have more sons in the family. But the young female generation in the rural area sees less difference in having boys or girls in the family. It is concluded that reforms in the old value system is an evolving process of everyday life and that the girls are the main social force for change.

Skolan i livet - livet i skolan : Några illitterata invandrarkvinnor lär sig tala, läsa och skriva på svenska som andraspråk

Many immigrants in Sweden have not had the chance to learn to read and write, for various reasons. In Sweden, literacy is a prerequisite to being able to function in the cultural community, and for many immigrants this is the first time that they experience their inability to read and write as a handicap or see themselves as “illiterate”. The aim of this study is to use a socio-cultural, second language and gender approach to describe, analyse and understand how a number of adult, illiterate, immigrant women experience their situation when they are expected to simultaneously learn to speak, read and write Swedish. The study focuses on two literacy groups in two Swedish municipalities. In one of the groups I act as both teacher and researcher. The thesis is a case study of the learning process of five illiterate immigrant women in Sweden. The results are based on interviews, carried out with the help of an interpreter, and observation of teaching and texts ritten by the students. The study is based on the assumption that human learning is an activity that takes place in a cultural community in a social context. When learning a language, the language is simultaneously the tool that facilitates social communication and the object of the learning process. The study shows that cultural communities influence the women in different ways. Gender structures are firmly planted in a patriarchal value system, which means that women are seen as inferior to men, and women are expected to “meet the demands of others”. The women have no time to study at home, as their household duties are prioritised. However, there are subtle indications that there is a wish to change the situation in accordance with Swedish values and norms. This can be seen in the Swedish for Immigrants (SFI) lessons. As they have little contact with Swedes, school is the only arena in which they have a chance to use Swedish. They are positive towards teaching and school as an institution. Here they are able to develop an alternative identity. The study also shows that teaching in the literacy groups is to a great extent based on a technical approach, in which the teacher tries to elicit a correct answer from the students. Social interaction involving contemplation and negotiation is either not included or not prioritised. the women’s experience and knowledge is not made use of. There are,however, occasions when collaborative discussions take place between the teacher and students. On these occasions an exchange of experiences takes place. Learning is based on the students’ own experiences and thoughts. Linguistic concepts gain meaning in the collaborative discussion. Initially the concepts may be unclear, but the group works on them together, adapting and adjusting them until they finally make sense. Finally, I conclude that women immigrants bring their own socio-cultural values and experience to the school situation, which affects their learning process to varying degrees. Furthermore, immigrant women need more time at school, as it is the only arena in which they can spend time on studying and personal development. another conclusion is that the school must become a learning community that recognises the immigrants’ cultures, makes use of the students’ experience and allows the students to participate in collaborative discussions, so that they can develop their ability to speak, read and write Swedish.

Clustering Lab value working with medical data

Data mining is a relatively new field of research that its objective is to acquire knowledge from large amounts of data. In medical and health care areas, due to regulations and due to the availability of computers, a large amount of data is becoming available [27]. On the one hand, practitioners are expected to use all this data in their work but, at the same time, such a large amount of data cannot be processed by humans in a short time to make diagnosis, prognosis and treatment schedules. A major objective of this thesis is to evaluate data mining tools in medical and health care applications to develop a tool that can help make rather accurate decisions. In this thesis, the goal is finding a pattern among patients who got pneumonia by clustering of lab data values which have been recorded every day. By this pattern we can generalize it to the patients who did not have been diagnosed by this disease whose lab values shows the same trend as pneumonia patients does. There are 10 tables which have been extracted from a big data base of a hospital in Jena for my work .In ICU (intensive care unit), COPRA system which is a patient management system has been used. All the tables and data stored in German Language database.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

TCA Evaluation : Lab Measurements, Modelling and System Simulations

The study reported here is part of a large project for evaluation of the Thermo-Chemical Accumulator (TCA), a technology under development by the Swedish company ClimateWell AB. The studies concentrate on the use of the technology for comfort cooling. This report concentrates on measurements in the laboratory, modelling and system simulation. The TCA is a three-phase absorption heat pump that stores energy in the form of crystallised salt, in this case Lithium Chloride (LiCl) with water being the other substance. The process requires vacuum conditions as with standard absorption chillers using LiBr/water. Measurements were carried out in the laboratories at the Solar Energy Research Center SERC, at Högskolan Dalarna as well as at ClimateWell AB. The measurements at SERC were performed on a prototype version 7:1 and showed that this prototype had several problems resulting in poor and unreliable performance. The main results were that: there was significant corrosion leading to non-condensable gases that in turn caused very poor performance; unwanted crystallisation caused blockages as well as inconsistent behaviour; poor wetting of the heat exchangers resulted in relatively high temperature drops there. A measured thermal COP for cooling of 0.46 was found, which is significantly lower than the theoretical value. These findings resulted in a thorough redesign for the new prototype, called ClimateWell 10 (CW10), which was tested briefly by the authors at ClimateWell. The data collected here was not large, but enough to show that the machine worked consistently with no noticeable vacuum problems. It was also sufficient for identifying the main parameters in a simulation model developed for the TRNSYS simulation environment, but not enough to verify the model properly. This model was shown to be able to simulate the dynamic as well as static performance of the CW10, and was then used in a series of system simulations. A single system model was developed as the basis of the system simulations, consisting of a CW10 machine, 30 m2 flat plate solar collectors with backup boiler and an office with a design cooling load in Stockholm of 50 W/m2, resulting in a 7.5 kW design load for the 150 m2 floor area. Two base cases were defined based on this: one for Stockholm using a dry cooler with design cooling rate of 30 kW; one for Madrid with a cooling tower with design cooling rate of 34 kW. A number of parametric studies were performed based on these two base cases. These showed that the temperature lift is a limiting factor for cooling for higher ambient temperatures and for charging with fixed temperature source such as district heating. The simulated evacuated tube collector performs only marginally better than a good flat plate collector if considering the gross area, the margin being greater for larger solar fractions. For 30 m2 collector a solar faction of 49% and 67% were achieved for the Stockholm and Madrid base cases respectively. The average annual efficiency of the collector in Stockholm (12%) was much lower than that in Madrid (19%). The thermal COP was simulated to be approximately 0.70, but has not been possible to verify with measured data. The annual electrical COP was shown to be very dependent on the cooling load as a large proportion of electrical use is for components that are permanently on. For the cooling loads studied, the annual electrical COP ranged from 2.2 for a 2000 kWh cooling load to 18.0 for a 21000 kWh cooling load. There is however a potential to reduce the electricity consumption in the machine, which would improve these figures significantly. It was shown that a cooling tower is necessary for the Madrid climate, whereas a dry cooler is sufficient for Stockholm although a cooling tower does improve performance. The simulation study was very shallow and has shown a number of areas that are important to study in more depth. One such area is advanced control strategy, which is necessary to mitigate the weakness of the technology (low temperature lift for cooling) and to optimally use its strength (storage).

Energy Storage for a Grid-Connected PV-System: A Feasibility Study

The work presented in this thesis concerns the dimensioning of an Energy Storage System (ESS) which will be used as an energy buffer for a grid-connected PV plant. This ESS should help managing the PV plant to inject electricity into the grid according to the requirements of the grid System Operator. It is desired to obtain a final production not below 1300kWh/kWp with a maximum ESS budget of 0.9€/Wp. The PV plant will be sited in Martinique Island and connected to the main grid. This grid is a small one where the perturbations due clouds in the PV generation are not negligible anymore. A software simulation tool, incorporating a model for the PV-plant production, the ESS and the required injection pattern of electricity into the grid has been developed in MS Excel. This tool has been used to optimize the relevant parameters defining the ESS so that the feed-in of electricity into the grid can be controlled to fulfill the conditions given by the System Operator. The inputs used for this simulation tool are, besides the conditions given by the System Operator on the allowed injection pattern, the production data from a similar PV-plant in a close-by location, and variables for defining the ESS. The PV production data used is from a site with similar climate and weather conditions as for the site on the Martinique Island and hence gives information on the short term insolation variations as well as expected annual electricity production. The ESS capacity and the injected electric energy will be the main figures to compare while doing an economic study of the whole plant. Hence, the Net Present Value, Benefit to Cost method and Pay-back period studies are carried on as dependent of the ESS capacity. The conclusion of this work is that it is possible to obtain the requested injection pattern by using an ESS. The design of the ESS can be made within an acceptable budget. The capacity of ESS to link with the PV system depends on the priorities of the final output characteristics, and it also depends on which economic parameter that is chosen as a priority.

Photovoltaic System Design for a Contaminated Area in Falun – Comparison of South and East- West Layout

In this thesis the solar part of a large grid-connected photovoltaic system design has been done. The main purpose was to size and optimize the system and to present figures helping to evaluate the prospective project rationality, which can potentially be constructed on a contaminated area in Falun. The methodology consisted in PV market study and component selection, site analysis and defining suitable area for solar installation; and system configuration optimization based on PVsyst simulations and Levelized Cost of Energy calculations. The procedure was mainly divided on two parts, preliminary and detailed sizing. In the first part the objective was complex, which included the investigation of the most profitable component combination and system optimization due to tilt and row distance. It was done by simulating systems with different components and orientations, which were sized for the same 100kW inverter in order to make a fair comparison. For each simulated result a simplified LCOE calculation procedure was applied. The main results of this part show that with the price of 0.43 €/Wp thin-film modules were the most cost effective solution for the case with a great advantage over crystalline type in terms of financial attractiveness. From the results of the preliminary study it was possible to select the optimal system configuration, which was used in the detailed sizing as a starting point. In this part the PVsyst simulations were run, which included full scale system design considering near shadings created by factory buildings. Additionally, more complex procedure of LCOE calculation has been used here considered insurances, maintenance, time value of money and possible cost reduction due to the system size. Two system options were proposed in final results; both cover the same area of 66000 m2. The first one represents an ordinary South faced design with 1.1 MW nominal power, which was optimized for the highest performance. According to PVsyst simulations, this system should produce 1108 MWh/year with the initial investment of 835,000 € and 0.056 €/kWh LCOE. The second option has an alternative East-West orientation, which allows to cover 80% of occupied ground and consequently have 6.6 MW PV nominal power. The system produces 5388 MWh/year costs about 4500,000 € and delivers electricity with the same price of 0.056 €/kWh. Even though the EW solution has 20% lower specific energy production, it benefits mainly from lower relative costs for inverters, mounting and annual maintenance expenses. After analyzing the performance results, among the two alternatives none of the systems showed a clear superiority so there was no optimal system proposed. Both, South and East-West solutions have own advantages and disadvantages in terms of energy production profile, configuration, installation and maintenance. Furthermore, the uncertainty due to cost figures assumptions restricted the results veracity.