Universal Experimental Measurement System «Sun-Walker» : Automotive measurement system for the evaluation of the solar irradiation distribution for the tests of the solar concentrated systems.

This Thesis project is a part of the research conducted in Solar industry. ABSOLICON Solar Concentrator AB has invented and started production of the prospective solar concentrated system Absolicon X10. The aims of this Thesis project are designing, assembling, calibrating and putting in operation the automatic measurement system intended to evaluate distribution of density of solar radiation in the focal line of the concentrated parabolic reflectors and to measure radiation from the artificial source of light being a calibration-testing tool.On the basis of the requirements of the company’s administration and needs of designing the concentrated reflectors the operation conditions for the Sun-Walker were formulated. As the first step, the complex design of the whole system was made and division on the parts was specified. After the preliminary conducted simulation of the functions and operation conditions of the all parts were formulated.As the next steps, the detailed design of all the parts was made. Most components were ordered from respective companies. Some of the mechanical components were made in the workshop of the company. All parts of the Sun-Walker were assembled and tested. The software part, which controls the Sun-Walker work and conducts measurements of solar irradiation, was created on the LabVIEW basis. To tune and test the software part, the special simulator was designed and assembled.When all parts were assembled in the complete system, the Sun-Walker was tested, calibrated and tuned.

Conceptual Product Development in Small Corporations

The main objective of the thesis “Conceptual Product Development in Small Corporations” is by the use of a case study test the MFD™-method (Erixon G. , 1998) combined with PMM in a product development project. (Henceforth called MFD™/PMM-method). The MFD™/PMM-method used for documenting and controlling a product development project has since it was introduced been used in several industries and projects. The method has been proved to be a good way of working with the early stages of product development, however, there are almost only projects carried out on large industries which means that there are very few references to how the MFD™/PMM-method works in a small corporation. Therefore, was the case study in the thesis “Conceptual Product Development in Small Corporations” carried out in a small corporation to find out whether the MFD™/PMM-method also can be applied and used in such a corporation.The PMM was proposed in a paper presented at Delft University of Technology in Holland 1998 by the author and Gunnar Erixon. (See appended paper C: The chart of modular function deployment.) The title “The chart of modular function deployment” was later renamed as PMM, Product Management Map. (Sweden PreCAD AB, 2000). The PMM consists of a QFD-matrix linked to MIM (Module Indication Matrix) via a coupling matrix which makes it possible to make an unbroken chain from the customer domain to the designed product/modules. The PMM makes it easy to correct omissions made in creating new products and modules.In the thesis “Conceptual Product Development in Small Corporations” the universal MFD™/PMM-method has been adapted by the author to three models of product development; original-, evolutionary- and incremental development.The evolutionary adapted MFD™/PMM-method was tested as a case study at Atlings AB in the community Ockelbo. Atlings AB is a small corporation with a total number of 50 employees and an annual turnover of 9 million €. The product studied at the corporation was a steady rest for supporting long shafts in turning. The project team consisted of management director, a sales promoter, a production engineer, a design engineer and a workshop technician, the author as team leader and a colleague from Dalarna University as discussion partner. The project team has had six meetings.The project team managed to use MFD™ and to make a complete PMM of the studied product. There were no real problems occurring in the project work, on the contrary the team members worked very well in the group, having ideas how to improve the product. Instead, the challenge for a small company is how to work with the MFD™/PMM-method in the long run! If the MFD™/PMM-method is to be a useful tool for the company it needs to be used continuously and that requires financial and personnel resources. One way for the company to overcome the probable lack of recourses regarding capital and personnel is to establish a good cooperation with a regional university or a development centre.

A study visit to a vitual company

To integrate study visits to different workplaces in higher education implies important benefits for the course quality. The study visit gives the students a better understanding for the real situations they will meet in working life. However for practical and economical reasons is that not always possible. The purpose of this project is to create a virtual company that shall replace the real one for study visits. The goal is to create a realistic picture and that intended use of it can come as close as possible to a real study visit. It is also important to facilitate linking theory and practice. The virtual company is built up by pictures, videos and text. All material is made available on a web page and when entering the students will meet a layout of the company. From that position is it possible to walk around and look at videos from different workstations. Besides that can they also listen to interviews with managers and representatives of staff as well as reading reports concerning productivity and the work environment. The focus of the study visit is work sciences, therefore the material also include some visualized information about work hazards. On the web page there are also a number of tasks for the students to carry out. Until the autumn 2011, 132 students at Dalarna University have visited and produced reports from the virtual company. They were studying in programs for mechanical engineering, production technicians and human resource management. An evaluation among some ten students showed that the study visit to the virtual company is flexible in time and effective, but that students wish to have even more detailed information about the company. Experiences from four years of use in a number of classes show that the concept is worth further development. Furthermore with production of new material the concept is likely to be applicable for other purposes.

The role of entrepreneurial networking on internationalization of a micro-sized Born Global Swedish fashion company : A narrative ethnographic research

Background: In recent studies a lot of attention is drawn to the connection between networking and entrepreneurship. Many scholars consider successful business and networking inseparable. Taking into consideration the topicality of the two notions discussed above the authors of this thesis decided to conduct the research dedicated to these phenomena in the field that interests them most – in the field of Swedish fashion. Purpose: The purpose of the thesis is to gain a deeper insight into entrepreneur’s experiences to point out the role of entrepreneurial networking in the process of internationalization of a micro-sized Swedish fashion company and to contribute to the research in this field by telling its unique story. Method: To achieve the purpose of the research a narrative ethnographic research was conducted. This research strategy was chosen because it suits the purpose best by giving an opportunity to get fresh insights into the field of entrepreneurial networking from the point of view of the entrepreneur. The data collected has a narrative nature therefore narrative analysis is used to present it. The methods of gathering the data are face-to-face interview and documents. Conclusion: we can define the most important role of entrepreneurial networking on the internationalization process of Odeur as an effective accelerator and a tool to fulfil the knowledge and expertise gaps in certain areas through other actors in the network.

Akademisk kvalitet, vad är det? : Om utarmningen av den akademiska autonomin

What is academic quality? On the decline of academic autonomy In light of the transformations that universities currently undergo, with Bologna as a keyword, the following questions are put: What ideals lie behind the assessment of academic “excellence” and “quality”? What agents have the ability to define what is good science and education today? These questions are approached through Pierre Bourdieus concept of field. Looking at the development the last decade, traditional academic values, such as the ideal of universal knowledge as (personal and collective) enrichment and the intellectual independence “of all political authority and economic power”, as stated in the Magna Charta Universitatum, seem to have emerged into the shadow of employability, knowledge control, competitiveness, and economic benefit. In connection with the formation of concepts such as “the knowledge society” and “knowledge based economies” the university has received a somewhat different and more central role in society. The university has come to take the role more of a knowledge producing enterprise clearly directed towards the surrounding society. There are higher demands on academic knowledge to contribute to economic, regional or national development and competitiveness. When the university is regarded as a knowledge company whose task is to accoun tfor the requests of the students, the labour market, and the business world it undertakes to follow trends and short term social phases rather than to critically examine them, which has been a traditional task for the university. If the academic work is guided by the market economical principle, that the client requests decide what quality is, instead of the experts on the academic field themselves (i.e. the scientists,) it is obviously not scientific ideals that constitute the criteria for what is good science and education.

Identity and image – the story of expertise in a manufacturing company

This thesis is an investigation on the corporate identity of the firm SSAB from a managerial viewpoint (1), the company communication through press releases (2), and the image of the company as portrayed in news press articles (3). The managerial view of the corporate identity is researched through interviews with a communication manager of SSAB (1), the corporate communication is researched through press releases from the company (2) and the image is researched in news press articles (3). The results have been deducted using content analysis. The three dimensions are compared in order to see if the topics are coherent. This work builds on earlier research in corporate identity and image research, stakeholder theory, corporate communication and media reputation theory. This is interesting to research as the image of the company framed by the media affects, among other things, the possibility for the company to attract new talent and employees. If there are different stories, or topics, told in the three dimensions then the future employees may not share the view of the company with the managers in it. The analysis show that there is a discrepancy between the topics on the three dimensions, both between the corporate identity and the communication through press releases, as well as between the communication through press releases and the image in news press articles.