Print quality study of newsprint : Further development of the laboratoryoffset press at PAPRO

A laboratory offset press has been developed over the last five years at PAPRO for testing print qualityon newsprint, as at present, there is no good way for the mills to test this issue. In this project a comparisonhas been made between a laboratory offset press and a commercial press to see if the laboratoryoffset press can be used as a reliable test method or if a further development is needed.To evaluate the method, similar papers have been printed in both presses and compared using imageanalysis techniques. All together eighteen samples were tested which is enough to give comparableresults. The print quality showed a high variation, the values from the laboratory offset press and thecommercial press were not following the same trends. At present time the laboratory offset press needsome further development before it can be used as a reliable test method for halftone prints. Even sosome conclusions were made.The newsprint that has been used came from Norske Skog Tasman Mill (Kawerau), since the otheraim of this project was to do a repeatability study of their three existing paper machines to distinguishpossible differences in the production. The paper samples were taken from each paper machine on sixdifferent dates to give a representative result. This also gave the opportunity to compare the machinesbetween themselves. Comparison between the machines shows that the wire side gives a better andmore even result than the topside on the prints from the laboratory offset press. According to the resultfrom the commercial press the wire side shows a higher degree of variability. Samples from papermachine 2 and 3 were less variable and had the lowest standard deviation of grey level for solid areas.This suggests that newsprints from PM 2 and PM 3 give a more even print quality with a better inkcoverage.

Module property verification : A method to plan and perform quality verifications in modular architectures

Modular product architectures have generated numerous benefits for companies in terms of cost, lead-time and quality. The defined interfaces and the module’s properties decrease the effort to develop new product variants, and provide an opportunity to perform parallel tasks in design, manufacturing and assembly. The background of this thesis is that companies perform verifications (tests, inspections and controls) of products late, when most of the parts have been assembled. This extends the lead-time to delivery and ruins benefits from a modular product architecture; specifically when the verifications are extensive and the frequency of detected defects is high. Due to the number of product variants obtained from the modular product architecture, verifications must handle a wide range of equipment, instructions and goal values to ensure that high quality products can be delivered. As a result, the total benefits from a modular product architecture are difficult to achieve. This thesis describes a method for planning and performing verifications within a modular product architecture. The method supports companies by utilizing the defined modules for verifications already at module level, so called MPV (Module Property Verification). With MPV, defects are detected at an earlier point, compared to verification of a complete product, and the number of verifications is decreased. The MPV method is built up of three phases. In Phase A, candidate modules are evaluated on the basis of costs and lead-time of the verifications and the repair of defects. An MPV-index is obtained which quantifies the module and indicates if the module should be verified at product level or by MPV. In Phase B, the interface interaction between the modules is evaluated, as well as the distribution of properties among the modules. The purpose is to evaluate the extent to which supplementary verifications at product level is needed. Phase C supports a selection of the final verification strategy. The cost and lead-time for the supplementary verifications are considered together with the results from Phase A and B. The MPV method is based on a set of qualitative and quantitative measures and tools which provide an overview and support the achievement of cost and time efficient company specific verifications. A practical application in industry shows how the MPV method can be used, and the subsequent benefits

Formal caregivers' perceptions of quality of care for older people : associating factors

Background: Despite the growing number of studies concerning quality of care for older people, there is a lack of studies depicting factors associated with good quality of care from the formal caregivers' perspective. The aim was to describe formal caregivers' perceptions of quality of care for older people in the community and explore factors associated with these perceptions. In total, 70 nursing assistants, 163 enrolled nurses and 198 registered nurses from 14 communities in central Sweden participated in the study. They filled out the following questionnaires: a modified version of Quality from the Patient's Perspective, Creative Climate Questionnaire, Stress of Conscience Questionnaire, items regarding education and competence, Health Index and Sense of coherence questionnaire. The overall response rate was 57 % (n = 431). Results: In the perceived reality of quality of care respondents assessed the highest mean value in the dimension medical-technical competence and physical technical conditions and lower values in the dimensions; identity-oriented approach, socio-cultural atmosphere and in the context specific dimension. The caregivers estimated their competence and health rather high, had lower average values in sense of coherence and organizational climate and low values in stress of conscience. Conculsions: The PR of quality of care were estimated higher among NA/ENs compared to RNs. Occupation, organizational climate and stress of conscience were factors associated with quality of care that explained 42 % of the variance. Competence, general health and sense of coherence were not significantly associated to quality of care. The mentioned factors explaining quality of care might be intertwined and showed that formal caregivers' working conditions are of great importance for quality of care.