Effective measures to decrease air contaminants through risk and control visualization : a study of the effective use of QR codes to facilitate safety training

Woodworking industries still consists of wood dust problems. Young workers are especially vulnerable to safety risks. To reduce risks, it is important to change attitudes and increase knowledge about safety. Safety training have shown to establish positive attitudes towards safety among employees. The aim of current study is to analyze the effect of QR codes that link to Picture Mix EXposure (PIMEX) videos by analyzing attitudes to this safety training method and safety in student responses. Safety training videos were used in upper secondary school handicraft programs to demonstrate wood dust risks and methods to decrease exposure to wood dust. A preliminary study was conducted to investigate improvement of safety training in two schools in preparation for the main study that investigated a safety training method in three schools. In the preliminary study the PIMEX method was first used in which students were filmed while wood dust exposure was measured and subsequently displayed on a computer screen in real time. Before and after the filming, teachers, students, and researchers together analyzed wood dust risks and effective measures to reduce exposure to them. For the main study, QR codes linked to PIMEX videos were attached at wood processing machines. Subsequent interviews showed that this safety training method enables students in an early stage of their life to learn about risks and safety measures to control wood dust exposure. The new combination of methods can create awareness, change attitudes and motivation among students to work more frequently to reduce wood dust. 

Brand Awareness among Customers : A case study of ICA-Kvantum

This research paper has been prepared by Bachelor students from Dalarna University in Borlänge. The project is centered on a case study of ICA – Kvantum and its brand awareness among customers. The purpose of this study is to find out that which measures can help ICA-Kvantum to create brand awareness among its current and potential customers by looking in to the importance of information of its offerings and use of effective communication tools to convey this information. Further, to recommend them what they need to do, to increase brand awareness among their customers with the help of managerial implications. The research question was formulated as what actions could be seen effective for ICA-Kvantum to maintain or improve brand awareness among its current and potential customers.The project was created with the help of theoretical concepts of brand awareness, brand loyalty, perceived quality, consumer decision model, integrated marketing communication approach and strategic planning process. These theories were applied in this thesis in order to find out the most effective communication measures to maintain or improve brand awareness among current and potential customers of ICA-Kvantum.The primary and secondary data was collected. Primary data was gathered through the survey among ICA-Kvantum customers in the front of the store in Borlänge. The personal interview with manager was conducted in the office of ICA-Kvantum store located in Borlänge. Secondary data was gathered from textbooks, academic journals, theses and websites.The empirical findings have been presented in detail and then analyzed with the help of theoretical concepts. The analysis and further results from survey and interview focused on importance of information, marketing communication tools, brand awareness and loyalty, perceived quality and implementation of strategic planning process. Moreover, the main weaknesses and strengths of ICA-Kvantun have been evaluated. The conclusion including short summary of analysis and its results have been provided at the end. Each weakness of issues related to brand awareness i.e. importance of information, effectiveness of marketing communication tools and strengths and weaknesses of ICA-Kvantum discussed in the paper, has been pointed out along with solutions and managerial implications.

Expert system to calculate the cofficient of friction : an approach to enhance traffic safety

Friction plays a key role in causing slipperiness as a low coefficient of friction on the road may result in slippery and hazardous conditions. Analyzing the strong relation between friction and accident risk on winter roads is a difficult task. Many weather forecasting organizations use a variety of standard and bespoke methods to predict the coefficient of friction on roads. This article proposes an approach to predict the extent of slipperiness by building and testing an expert system. It estimates the coefficient of friction on winter roads in the province of Dalarna, Sweden using the prevailing weather conditions as a basis. Weather data from the road weather information system, Sweden (RWIS) was used. The focus of the project was to use the expert system as a part of a major project in VITSA, within the domain of intelligent transport systems

Role of headmasters, teachers and supervisors in knowledge transfer about occupational health and safety to pupils in vocational education

Background Young people are at an increased risk for illness in working life. The authorities stipulate certain goals for training in occupational health and safety (OHS) in vocational schools. A previous study concluded that pupils in vocational education had limited knowledge in the prevention of health risks at work. The aim of the current study, therefore, was to study how OHS training is organized in school and in workplace-based learning (WPL).   Method The study design featured a qualitative approach, which included interviews with 12 headmasters, 20 teachers, and 20 supervisors at companies in which the pupils had their WPL. The study was conducted at 10 upper secondary schools, located in Central Sweden, that were graduating pupils in four vocational programs.   Result The interviews with headmasters, teachers, and supervisors indicate a staggered picture of how pupils are prepared for safe work. The headmasters generally give teachers the responsibility for how goals should be reached. Teaching is very much based on risk factors that are present in the workshops and on teachers’ own experiences and knowledge. The teaching during WPL also lacks the systematic training in OHS as well as in the traditional classroom environment.   Conclusion Teachers and supervisors did not plan the training in OHS in accordance with the provisions of systematic work environment management. Instead, the teachers based the training on their own experiences. Most of the supervisors did not get information from the schools as to what should be included when introducing OHS issues in WPL.

Young peoples’ entrance to the workplace : Introduction to occupational health and safety

Negative outcomes of a poor work environment are more frequent among young workers. The aim of the current study was to study former pupils’ conditions concerning occupational health and safety by investigating the workplaces’, safety climate, the degree of implementation of SWEM and the their introduction programs. Four branches were included in the study: Industrial, Restaurant, Transport and Handicraft, specialising in wood. Semi-structured dialogues were undertaken with 15 employers at companies in which former pupils were employed. They also answered a questionnaire about SWEM. Former pupils and experienced employees were upon the same occasion asked to fill in a questionnaire about safety climate at the workplace. Workplace introduction programs varied and were strongly linked to company size. Most of the former pupils and experienced employees rated the safety climate at their company as high, or good. Employers in three of the branches rated the SWEM implemented at their workplaces to be effective. The Industry companies, which had the largest workplaces, gave the most systematic and workplace introduction for new employees. There are no results from this study explaining the fact that young workers have a higher risk for workplace accidents.

Being a bridge : Swedish antenatal care midwives’ encounters with Somali-born women and questions of violence; a qualitative study

Background: Violence against women is associated with serious health problems, including adverse maternal and child health. Antenatal care (ANC) midwives are increasingly expected to implement the routine of identifying exposure to violence. An increase of Somali born refugee women in Sweden, their reported adverse childbearing health and possible links to violence pose a challenge to the Swedish maternity health care system. Thus, the aim was to explore ways ANC midwives in Sweden work with Somali born women and the questions of exposure to violence. Methods: Qualitative individual interviews with 17 midwives working with Somali-born women in nine ANC clinics in Sweden were analyzed using thematic analysis. Results: The midwives strived to focus on the individual woman beyond ethnicity and cultural differences. In relation to the Somali born women, they navigated between different definitions of violence, ways of handling adversities in life and social contexts, guided by experience based knowledge and collegial support. Seldom was ongoing violence encountered. The Somali-born women’s’ strengths and contentment were highlighted, however, language skills were considered central for a Somali-born woman’s access to rights and support in the Swedish society. Shared language, trustful relationships, patience, and networking were important aspects in the work with violence among Somali-born women. Conclusion: Focus on the individual woman and skills in inter-cultural communication increases possibilities of overcoming social distances. This enhances midwives’ ability to identify Somali born woman’s resources and needs regarding violence disclosure and support. Although routine use of professional interpretation is implemented, it might not fully provide nuances and social safety needed for violence disclosure. Thus, patience and trusting relationships are fundamental in work with violence among Somali born women. In collaboration with social networks and other health care and social work professions, the midwife can be a bridge and contribute to increased awareness of rights and support for Somali-born women in a new society.

Swedish translation and psychometric testing of the safety attitudes questionnaire (operating room version)

Background: Tens of millions of patients worldwide suffer from avoidable disabling injuries and death every year. Measuring the safety climate in health care is an important step in improving patient safety. The most commonly used instrument to measure safety climate is the Safety Attitudes Questionnaire (SAQ). The aim of the present study was to establish the validity and reliability of the translated version of the SAQ. Methods: The SAQ was translated and adapted to the Swedish context. The survey was then carried out with 374 respondents in the operating room (OR) setting. Data was received from three hospitals, a total of 237 responses. Cronbach's alpha and confirmatory factor analysis (CFA) was used to evaluate the reliability and validity of the instrument. Results: The Cronbach's alpha values for each of the factors of the SAQ ranged between 0.59 and 0.83. The CFA and its goodness-of-fit indices (SRMR 0.055, RMSEA 0.043, CFI 0.98) showed good model fit. Intercorrelations between the factors safety climate, teamwork climate, job satisfaction, perceptions of management, and working conditions showed moderate to high correlation with each other. The factor stress recognition had no significant correlation with teamwork climate, perception of management, or job satisfaction. Conclusions: Therefore, the Swedish translation and psychometric testing of the SAQ (OR version) has good construct validity. However, the reliability analysis suggested that some of the items need further refinement to establish sound internal consistency. As suggested by previous research, the SAQ is potentially a useful tool for evaluating safety climate. However, further psychometric testing is required with larger samples to establish the psychometric properties of the instrument for use in Sweden.