Effective measures to decrease air contaminants through risk and control visualization : a study of the effective use of QR codes to facilitate safety training

Woodworking industries still consists of wood dust problems. Young workers are especially vulnerable to safety risks. To reduce risks, it is important to change attitudes and increase knowledge about safety. Safety training have shown to establish positive attitudes towards safety among employees. The aim of current study is to analyze the effect of QR codes that link to Picture Mix EXposure (PIMEX) videos by analyzing attitudes to this safety training method and safety in student responses. Safety training videos were used in upper secondary school handicraft programs to demonstrate wood dust risks and methods to decrease exposure to wood dust. A preliminary study was conducted to investigate improvement of safety training in two schools in preparation for the main study that investigated a safety training method in three schools. In the preliminary study the PIMEX method was first used in which students were filmed while wood dust exposure was measured and subsequently displayed on a computer screen in real time. Before and after the filming, teachers, students, and researchers together analyzed wood dust risks and effective measures to reduce exposure to them. For the main study, QR codes linked to PIMEX videos were attached at wood processing machines. Subsequent interviews showed that this safety training method enables students in an early stage of their life to learn about risks and safety measures to control wood dust exposure. The new combination of methods can create awareness, change attitudes and motivation among students to work more frequently to reduce wood dust. 

Improved Road Design for Future Maintenance - Analysis of Road Barrier Repair Costs

The cost of a road construction over its service life is a function of the design, quality of construction, maintenance strategies and maintenance operations. Unfortunately, designers often neglect a very important aspect which is the possibility to perform future maintenance activities. The focus is mainly on other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This licentiate thesis is a part of a Ph.D. project entitled “Road Design for lower maintenance costs” that aims to examine how the life-cycle costs can be optimized by selection of appropriate geometrical designs for the roads and their components. The result is expected to give a basis for a new method used in the road planning and design process using life-cycle cost analysis with particular emphasis on road maintenance. The project started with a review of literature with the intention to study conditions causing increased needs for road maintenance, the efforts made by the road authorities to satisfy those needs and the improvement potential by consideration of maintenance aspects during planning and design. An investigation was carried out to identify the problems which obstruct due consideration of maintenance aspects during the road planning and design process. This investigation focused mainly on the road planning and design process at the Swedish Road Administration. However, the road planning and design process in Denmark, Finland and Norway were also roughly evaluated to gain a broader knowledge about the research subject. The investigation was carried out in two phases: data collection and data analysis. Data was collected by semi-structured interviews with expert actors involved in planning, design and maintenance and by a review of design-related documents. Data analyses were carried out using a method called “Change Analysis”. This investigation revealed a complex combination of problems which result in inadequate consideration of maintenance aspects. Several urgent needs for changes to eliminate these problems were identified. Another study was carried out to develop a model for calculation of the repair costs for damages of different road barrier types and to analyse how factors such as road type, speed limits, barrier types, barrier placement, type of road section, alignment and seasonal effects affect the barrier damages and the associated repair costs. This study was carried out using a method called the “Case Study Research Method”. Data was collected from 1087 barrier repairs in two regional offices of the Swedish Road Administration, the Central Region and the Western Region. A table was established for both regions containing the repair cost per vehicle kilometre for different combinations of barrier types, road types and speed limits. This table can be used by the designers in the calculation of the life-cycle costs for different road barrier types.

Road Design for Future Maintenance : Life-cycle Cost Analyses for Road Barriers

The cost of a road construction over its service life is a function of design, quality of construction as well as maintenance strategies and operations. An optimal life-cycle cost for a road requires evaluations of the above mentioned components. Unfortunately, road designers often neglect a very important aspect, namely, the possibility to perform future maintenance activities. Focus is mainly directed towards other aspects such as investment costs, traffic safety, aesthetic appearance, regional development and environmental effects. This doctoral thesis presents the results of a research project aimed to increase consideration of road maintenance aspects in the planning and design process. The following subgoals were established: Identify the obstacles that prevent adequate consideration of future maintenance during the road planning and design process; and Examine optimisation of life-cycle costs as an approach towards increased efficiency during the road planning and design process. The research project started with a literature review aimed at evaluating the extent to which maintenance aspects are considered during road planning and design as an improvement potential for maintenance efficiency. Efforts made by road authorities to increase efficiency, especially maintenance efficiency, were evaluated. The results indicated that all the evaluated efforts had one thing in common, namely ignorance of the interrelationship between geometrical road design and maintenance as an effective tool to increase maintenance efficiency. Focus has mainly been on improving operating practises and maintenance procedures. This fact might also explain why some efforts to increase maintenance efficiency have been less successful. An investigation was conducted to identify the problems and difficulties, which obstruct due consideration of maintainability during the road planning and design process. A method called “Change Analysis” was used to analyse data collected during interviews with experts in road design and maintenance. The study indicated a complex combination of problems which result in inadequate consideration of maintenance aspects when planning and designing roads. The identified problems were classified into six categories: insufficient consulting, insufficient knowledge, regulations and specifications without consideration of maintenance aspects, insufficient planning and design activities, inadequate organisation and demands from other authorities. Several urgent needs for changes to eliminate these problems were identified. One of the problems identified in the above mentioned study as an obstacle for due consideration of maintenance aspects during road design was the absence of a model for calculating life-cycle costs for roads. Because of this lack of knowledge, the research project focused on implementing a new approach for calculating and analysing life-cycle costs for roads with emphasis on the relationship between road design and road maintainability. Road barriers were chosen as an example. The ambition is to develop this approach to cover other road components at a later stage. A study was conducted to quantify repair rates for barriers and associated repair costs as one of the major maintenance costs for road barriers. A method called “Case Study Research Method” was used to analyse the effect of several factors on barrier repairs costs, such as barrier type, road type, posted speed and seasonal effect. The analyses were based on documented data associated with 1625 repairs conducted in four different geographical regions in Sweden during 2006. A model for calculation of average repair costs per vehicle kilometres was created. Significant differences in the barrier repair costs were found between the studied barrier types. In another study, the injuries associated with road barrier collisions and the corresponding influencing factors were analysed. The analyses in this study were based on documented data from actual barrier collisions between 2005 and 2008 in Sweden. The result was used to calculate the cost for injuries associated with barrier collisions as a part of the socio-economic cost for road barriers. The results showed significant differences in the number of injuries associated with collisions with different barrier types. To calculate and analyse life-cycle costs for road barriers a new approach was developed based on a method called “Activity-based Life-cycle Costing”. By modelling uncertainties, the presented approach gives a possibility to identify and analyse factors crucial for optimising life-cycle costs. The study showed a great potential to increase road maintenance efficiency through road design. It also showed that road components with low investment costs might not be the best choice when including maintenance and socio-economic aspects. The difficulties and problems faced during the collection of data for calculating life-cycle costs for road barriers indicated a great need for improving current data collecting and archiving procedures. The research focused on Swedish road planning and design. However, the conclusions can be applied to other Nordic countries, where weather conditions and road design practices are similar. The general methodological approaches used in this research project may be applied also to other studies.

Hårdare tag i arbetslivet? : Åtgärder mot arbetsrelaterat våld i facklig press 1978–2004

Preventing violence at work: A study of descriptions of safety measures in Swedish trade union journals 1978–2004 The purpose of this study is to examine if perceptions of interventions aimed at violence in the workplace have changed since the 1970s. In the beginning of the study period, structural factors are seen as the dominating explanation for workplace violence. The crime perspective rises in the 1990’s and methods of intervention becomes the control- and justice functions of larger society. The result shows search for accountability to be a salient factor for understanding the development towards an increasing use of penal sanctions.

De oauktoriserade migranterna i svensk byggnadssektor : En studie i deportationspolitik 1990–2004

The unauthorized migrants in the Swedish construction sector – a study in the policy of deportation 1990–2004 The unauthorized migration of construction workers to Sweden increased during the 1990s, especially at the end of the decade. The migrants often came from Poland and the Baltic states. The aim of this article is to examine this change of the migration pattern to Sweden and how the Swedish Building Workers Union responded to this new situation. I examine how the Building Workers Union cooperated with the Police authorities to find, capture and deport unauthorized migrants. A conclusion is that the Building Workers Union has not adopted a more inclusionary strategy towards unauthorized migrants, as have trade unions in Spain and US. The main strategy has instead been to try to restrict this migration. One explanation of this is that the Building Workers Union is a strong and well organized trade union. It didn’t perceive of unauthorized migrants as potential new members, but as a threat to wages and work conditions. Another explanation is that it has been able to restrict migration in the past. This may contribute to making demands for restrictions an attractive strategy in the present even when the possibilities of succeeding with this have diminished.

Expert system to calculate the cofficient of friction : an approach to enhance traffic safety

Friction plays a key role in causing slipperiness as a low coefficient of friction on the road may result in slippery and hazardous conditions. Analyzing the strong relation between friction and accident risk on winter roads is a difficult task. Many weather forecasting organizations use a variety of standard and bespoke methods to predict the coefficient of friction on roads. This article proposes an approach to predict the extent of slipperiness by building and testing an expert system. It estimates the coefficient of friction on winter roads in the province of Dalarna, Sweden using the prevailing weather conditions as a basis. Weather data from the road weather information system, Sweden (RWIS) was used. The focus of the project was to use the expert system as a part of a major project in VITSA, within the domain of intelligent transport systems

Immigration, security and the public debate on US language policy : a critical discourse analysis of language attitudes in the United States of America

The narrative of the United States is of a "nation of immigrants" in which the language shift patterns of earlier ethnolinguistic groups have tended towards linguistic assimilation through English. In recent years, however, changes in the demographic landscape and language maintenance by non-English speaking immigrants, particularly Hispanics, have been perceived as threats and have led to calls for an official English language policy.This thesis aims to contribute to the study of language policy making from a societal security perspective as expressed in attitudes regarding language and identity originating in the daily interaction between language groups. The focus is on the role of language and American identity in relation to immigration. The study takes an interdisciplinary approach combining language policy studies, security theory, and critical discourse analysis. The material consists of articles collected from four newspapers, namely USA Today, The New York Times, Los Angeles Times, and San Francisco Chronicle between April 2006 and December 2007.Two discourse types are evident from the analysis namely Loyalty and Efficiency. The former is mainly marked by concerns of national identity and contains speech acts of security related to language shift, choice and English for unity. Immigrants are represented as dehumanised, and harmful. Immigration is given as sovereignty-related, racial, and as war. The discourse type of Efficiency is mainly instrumental and contains speech acts of security related to cost, provision of services, health and safety, and social mobility. Immigrants are further represented as a labour resource. These discourse types reflect how the construction of the linguistic 'we' is expected to be maintained. Loyalty is triggered by arguments that the collective identity is threatened and is itself used in reproducing the collective 'we' through hegemonic expressions of monolingualism in the public space and semi-public space. The denigration of immigrants is used as a tool for enhancing societal security through solidarity and as a possible justification for the denial of minority rights. Also, although language acquisition patterns still follow the historical trend of language shift, factors indicating cultural separateness such as the appearance of speech communities or the use of minority languages in the public space and semi-public space have led to manifestations of intolerance. Examples of discrimination and prejudice towards minority groups indicate that the perception of worth of a shared language differs from the actual worth of dominant language acquisition for integration purposes. The study further indicates that the efficient working of the free market by using minority languages to sell services or buy labour is perceived as conflicting with nation-building notions since it may create separately functioning sub-communities with a new cultural capital recognised as legitimate competence. The discourse types mainly represent securitising moves constructing existential threats. The perception of threat and ideas of national belonging are primarily based on a zero-sum notion favouring monolingualism. Further, the identity of the immigrant individual is seen as dynamic and adaptable to assimilationist measures whereas the identity of the state and its members are perceived as static. Also, the study shows that debates concerning language status are linked to extra-linguistic matters. To conclude, policy makers in the US need to consider the relationship between four factors, namely societal security based on collective identity, individual/human security, human rights, and a changing linguistic demography, for proposed language intervention measures to be successful.

From the road network database to a graph for localization purposes

The problems of finding best facility locations require complete and accurate road network with the corresponding population data in a specific area. However the data obtained in road network databases usually do not fit in this usage. In this paper we propose our procedure of converting the road network database to a road graph which could be used in localization problems. The road network data come from the National road data base in Sweden. The graph derived is cleaned, and reduced to a suitable level for localization problems. The population points are also processed in ordered to match with that graph. The reduction of the graph is done maintaining most of the accuracy for distance measures in the network.

Implementation of Video Monitoring In Aluminium Industry

The aim was to evaluate results and experiences from development of new technology, a training program and implementation of strategies for the use of a video exposure monitoring method, PIMEX. Starting point of this study is an increased incidence of asthma among workers in the aluminium industry. Exposure peaks of fumes are supposed to play an important role. PIMEX makes it possible to link used work practice, use of control technology, and so forth to peaks. Nine companies participated in the project, which was divided into three parts, development of PIMEX technology, production of training material, and training in use of equipment and related strategies. The use of the video exposure monitoring method PIMEX offers prerequisites supporting workers participation in safety activities. The experiences from the project reveal the importance of good timing of primary training, technology development, technical support, and follow up training. In spite of a delay of delivery of the new technology, representatives from the participating companies declared that the experiences showed that PIMEX gave an important contribution for effective control of hazards in the companies. Eight out of nine smelters used the PIMEX method as a part of a strategy for control of workers exposure to fumes in potrooms. Possibilities to conduct effective control measures were identified. This article describes experiences from implementation of a, for this branch, new method supporting workers participation for workplace improvements.

Traffic and Road Sign Recognition

This thesis presents a system to recognise and classify road and traffic signs for the purpose of developing an inventory of them which could assist the highway engineers’ tasks of updating and maintaining them. It uses images taken by a camera from a moving vehicle. The system is based on three major stages: colour segmentation, recognition, and classification. Four colour segmentation algorithms are developed and tested. They are a shadow and highlight invariant, a dynamic threshold, a modification of de la Escalera’s algorithm and a Fuzzy colour segmentation algorithm. All algorithms are tested using hundreds of images and the shadow-highlight invariant algorithm is eventually chosen as the best performer. This is because it is immune to shadows and highlights. It is also robust as it was tested in different lighting conditions, weather conditions, and times of the day. Approximately 97% successful segmentation rate was achieved using this algorithm.Recognition of traffic signs is carried out using a fuzzy shape recogniser. Based on four shape measures - the rectangularity, triangularity, ellipticity, and octagonality, fuzzy rules were developed to determine the shape of the sign. Among these shape measures octangonality has been introduced in this research. The final decision of the recogniser is based on the combination of both the colour and shape of the sign. The recogniser was tested in a variety of testing conditions giving an overall performance of approximately 88%.Classification was undertaken using a Support Vector Machine (SVM) classifier. The classification is carried out in two stages: rim’s shape classification followed by the classification of interior of the sign. The classifier was trained and tested using binary images in addition to five different types of moments which are Geometric moments, Zernike moments, Legendre moments, Orthogonal Fourier-Mellin Moments, and Binary Haar features. The performance of the SVM was tested using different features, kernels, SVM types, SVM parameters, and moment’s orders. The average classification rate achieved is about 97%. Binary images show the best testing results followed by Legendre moments. Linear kernel gives the best testing results followed by RBF. C-SVM shows very good performance, but ?-SVM gives better results in some case.

Role of headmasters, teachers and supervisors in knowledge transfer about occupational health and safety to pupils in vocational education

Background Young people are at an increased risk for illness in working life. The authorities stipulate certain goals for training in occupational health and safety (OHS) in vocational schools. A previous study concluded that pupils in vocational education had limited knowledge in the prevention of health risks at work. The aim of the current study, therefore, was to study how OHS training is organized in school and in workplace-based learning (WPL).   Method The study design featured a qualitative approach, which included interviews with 12 headmasters, 20 teachers, and 20 supervisors at companies in which the pupils had their WPL. The study was conducted at 10 upper secondary schools, located in Central Sweden, that were graduating pupils in four vocational programs.   Result The interviews with headmasters, teachers, and supervisors indicate a staggered picture of how pupils are prepared for safe work. The headmasters generally give teachers the responsibility for how goals should be reached. Teaching is very much based on risk factors that are present in the workshops and on teachers’ own experiences and knowledge. The teaching during WPL also lacks the systematic training in OHS as well as in the traditional classroom environment.   Conclusion Teachers and supervisors did not plan the training in OHS in accordance with the provisions of systematic work environment management. Instead, the teachers based the training on their own experiences. Most of the supervisors did not get information from the schools as to what should be included when introducing OHS issues in WPL.

Young peoples’ entrance to the workplace : Introduction to occupational health and safety

Negative outcomes of a poor work environment are more frequent among young workers. The aim of the current study was to study former pupils’ conditions concerning occupational health and safety by investigating the workplaces’, safety climate, the degree of implementation of SWEM and the their introduction programs. Four branches were included in the study: Industrial, Restaurant, Transport and Handicraft, specialising in wood. Semi-structured dialogues were undertaken with 15 employers at companies in which former pupils were employed. They also answered a questionnaire about SWEM. Former pupils and experienced employees were upon the same occasion asked to fill in a questionnaire about safety climate at the workplace. Workplace introduction programs varied and were strongly linked to company size. Most of the former pupils and experienced employees rated the safety climate at their company as high, or good. Employers in three of the branches rated the SWEM implemented at their workplaces to be effective. The Industry companies, which had the largest workplaces, gave the most systematic and workplace introduction for new employees. There are no results from this study explaining the fact that young workers have a higher risk for workplace accidents.