Arbetsorganisation i träbränslefabriker

The objective of this study has been to describe and analyse existing forms of organisation in wood fuel plants regarding work tasks, organisational structure, work content, skill demands, crew recruitment, working hours and wage conditions. The study has been introductory, con¬sisting of 2-3 hour visits to 12 plants.The production of refined wood fuels is carried out in rather small plants. The number of employees ranges from 6 to 15 persons in the factories producing between 20 and 100 thousand tons per year. Generally one shift crew consists of only two persons. The operator job requires multiskill capacity, dexterity and autonomous problem-solving.The job can be considered as qualified, responsible, autonomous, meaningful and variable. It was generally considered that it takes about a year to become a good operator. And even after that, one is still learning. Negative factors are shift work, partly poor physical working environment (dust and noise) and, occasionally, mental pressure and overtime.Modern organisation concepts are, to a large extent, applied in the wood fuel plants. The organisation is flat, lean and customer-oriented.

Distance measure and the p-median problem in rural areas

The p-median model is used to locate P facilities to serve a geographically distributed population. Conventionally, it is assumed that the population patronize the nearest facility and that the distance between the resident and the facility may be measured by the Euclidean distance. Carling, Han, and Håkansson (2012) compared two network distances with the Euclidean in a rural region witha sparse, heterogeneous network and a non-symmetric distribution of thepopulation. For a coarse network and P small, they found, in contrast to the literature, the Euclidean distance to be problematic. In this paper we extend their work by use of a refined network and study systematically the case when P is of varying size (2-100 facilities). We find that the network distance give as gooda solution as the travel-time network. The Euclidean distance gives solutions some 2-7 per cent worse than the network distances, and the solutions deteriorate with increasing P. Our conclusions extend to intra-urban location problems.

Att tillämpa återkommande mätning av kundnöjdhet i IT-projekt : En vidareutvecklad modell baserad på modellerna American Customer Satisfaction Index (ACSI) och SERVQUAL

I dagens samhälle är det allt viktigare för företag att behålla sina existerande kunder då konkurrensen blir allt hårdare. Detta medför att företag försöker vidta åtgärder för att vårda relationer med sina kunder. Detta problem är även högst relevant inom IT-branschen. Inom IT-branschen är det vanligt att arbeta agilt i IT-projekt. Vår samarbetspartner har sett ett ökat behov av att mäta servicekvalitet på ett återkommande sätt inom IT-projekt, detta för att mäta relevanta variabler som sträcker sig utanför kravspecifikationen. För att mäta framgång gällande detta arbetssätt vill man kunna mäta Nöjd Kund Index (NKI) för att kunna jämföra IT-projekt internt i företaget. Då tidigare forskning visat avsaknad av modeller innehållande både mätning av servicekvalitet samt NKI har lämplig litteratur studerats där det framkommit att modellen SERVQUAL är vedertagen för mätning av servicekvalitet och modellen American Customer Satisfaction Index (ACSI) är vedertagen för mätning av NKI. Detta har legat till grund för arbetets problemformulering och syfte. Syftet med arbetet är att skapa en vidareutvecklad modell för mätning av NKI för att jämföra IT-projekt internt samt återkommande mätning av servicekvalitet inom IT-projekt. Framtagande av denna modell har sedan skett genom forskningsstrategin Design and Creation. Intervjuer har genomförts för kravfångst till den vidareutvecklade modellen. Resultatet av denna forskningsstrategi blev sedan en vidareutvecklad modell baserad på ovan nämnda modeller med återkommande förhållningssätt för mätning av servicekvalitet inom IT-projekt och mätning av NKI för att jämföra IT-projekt internt i företaget. Den framtagna modellen har sedan verifierats genom ytterligare intervjuer med respondenter som innehar god erfarenhet från kundsidan av IT-projekt. Från dessa intervjuer kunde sedan slutsats dras att denna modell är att anse som applicerbar i empirin gällande IT-projekt.

Simple Question, Complex Answer : Pathways Towards a 50% Decrease in Building Energy Use

Addressing building energy use is a pressing issue for building sector decision makers across Europe. In Sweden, some regions have adopted a target of reducing energy use in buildings by 50% until 2050. However, building codes currently do not support as ambitious objectives as these, and novel approaches to addressing energy use in buildings from a regional perspective are called for. The purpose of this licentiate thesis was to provide a deeper understanding of most relevant issues with regard to energy use in buildings from a broad perspective and to suggest pathways towards reaching the long-term savings objective. Current trends in building sector structure and energy use point to detached houses constructed before 1981 playing a key role in the energy transition, especially in the rural areas of Sweden. In the Swedish county of Dalarna, which was used as a study area in this thesis, these houses account for almost 70% of the residential heating demand. Building energy simulations of eight sample houses from county show that there is considerable techno-economic potential for energy savings in these houses, but not quite enough to reach the 50% savings objective. Two case studies from rural Sweden show that savings well beyond 50% are achievable, both when access to capital and use of high technology are granted and when they are not. However, on a broader scale both direct and indirect rebound effects will have to be expected, which calls for more refined approaches to energy savings. Furthermore, research has shown that the techno-economic potential is in fact never realised, not even in the most well-designed intervention programmes, due to the inherent complexity of human behaviour with respect to energy use. This is not taken account of in neither current nor previous Swedish energy use legislation. Therefore an approach that considers the technical prerequisites, economic aspects and the perspective of the many home owners, based on Community-Based Social Marketing methodology, is suggested as a way forward towards reaching the energy savings target.

Role of dietary fats in modulating cardiometabolic risk during moderate weight gain : a randomized double-blind overfeeding trial (LIPOGAIN study)

BACKGROUND: Whether the type of dietary fat could alter cardiometabolic responses to a hypercaloric diet is unknown. In addition, subclinical cardiometabolic consequences of moderate weight gain require further study. METHODS AND RESULTS: In a 7-week, double-blind, parallel-group, randomized controlled trial, 39 healthy, lean individuals (mean age of 27±4) consumed muffins (51% of energy [%E] from fat and 44%E refined carbohydrates) providing 750 kcal/day added to their habitual diets. All muffins had identical contents, except for type of fat; sunflower oil rich in polyunsaturated fatty acids (PUFA diet) or palm oil rich in saturated fatty acids (SFA diet). Despite comparable weight gain in the 2 groups, total: high-density lipoprotein (HDL) cholesterol, low-density lipoprotein:HDL cholesterol, and apolipoprotein B:AI ratios decreased during the PUFA versus the SFA diet (-0.37±0.59 versus +0.07±0.29, -0.31±0.49 versus +0.05±0.28, and -0.07±0.11 versus +0.01±0.07, P=0.003, P=0.007, and P=0.01 for between-group differences), whereas no significant differences were observed for other cardiometabolic risk markers. In the whole group (ie, independently of fat type), body weight increased (+2.2%, P<0.001) together with increased plasma proinsulin (+21%, P=0.007), insulin (+17%, P=0.003), proprotein convertase subtilisin/kexin type 9, (+9%, P=0.008) fibroblast growth factor-21 (+31%, P=0.04), endothelial markers vascular cell adhesion molecule-1, intercellular adhesion molecule-1, and E-selectin (+9, +5, and +10%, respectively, P<0.01 for all), whereas nonesterified fatty acids decreased (-28%, P=0.001). CONCLUSIONS: Excess energy from PUFA versus SFA reduces atherogenic lipoproteins. Modest weight gain in young individuals induces hyperproinsulinemia and increases biomarkers of endothelial dysfunction, effects that may be partly outweighed by the lipid-lowering effects of PUFA. CLINICAL TRIAL REGISTRATION URL: http://ClinicalTrials.gov. Unique identifier: NCT01427140.