Movements and mechanical stresses in gas-filled flat plate solar collectors

Sealed gas filled flat plate solar collectors will have stresses in the material since volume and pressure varies in the gas when the temperature changes. Several geometries were analyzed and it could be seen that it is possible reducing the stresses and improve the safety factor of the weakest point in the construction by using larger area and/or reducing the distance between glass and absorber and/or change width and height relationship so the tubes are getting longer. Further it could be shown that the safety factor won't always get improved with reinforcements. It is so because when an already strong part of the collector gets reinforced it will expose weaker parts for higher stresses. The finite element method was used for finding out the stresses.

Passive crosslaminated timber buildings : Final report Cerbof-project no. 76

In this project, Stora Enso’s newly developed building system has been further developed to allow building to the Swedish passive house standard for the Swedish climate. The building system is based on a building framework of CLT (Cross laminated timber) boards. The concept has been tested on a small test building. The experience gained from this test building has also been used for planning a larger building (two storeys with the option of a third storey) with passive house standard with this building system. The main conclusions from the project are:  It is possible to build airtight buildings with this technique without using traditional vapour barriers. Initial measurements show that this can be done without reaching critical humidity levels in the walls and roof, at least where wood fibre insulation is used, as this has a greater capacity for storing and evening out the moisture than mineral wool. However, the test building has so far not been exposed to internal generation of moisture (added moisture from showers, food preparation etc.). This needs to be investigated and this will be done during the winter 2013-14.  A new fixing method for doors and windows has been tested without traditional fibre filling between them and the CLT panel. The door or window is pressed directly on to the CLT panel instead, with an expandable sealing strip between them. This has been proved to be successful.  The air tightness between the CLT panels is achieved with expandable sealing strips between the panels. The position of the sealing strips is important, both for the air tightness itself and to allow rational assembly.  Recurrent air tightness measurements show that the air tightness decreased somewhat during the first six months, but not to such an extent that the passive house criteria were not fulfilled. The reason for the decreased air tightness is not clear, but can be due to small movements in the CLT construction and also to the sealing strips being affected by changing outdoor temperatures.  Long term measurements (at least two years) have to be carried out before more reliable conclusions can be drawn regarding the long term effect of the construction on air tightness and humidity in the walls.  An economic analysis comparing using a concrete frame or the studied CLT frame for a three storey building shows that it is probably more expensive to build with CLT. For buildings higher than three floors, the CLT frame has economic advantages, mainly because of the shorter building time compared to using concrete for the frame. In this analysis, no considerations have been taken to differences in the influence on the environment or the global climate between the two construction methods.

Learning as movements in interspace

My research issues (in rearch project for PhD-degree, named Drama in School) concern how learning takes place in drama education in compulsory school. One part is to explore and problematize approaches to learning (in and through drama). In this paper will the concept learning be discussed by using a thought derived from Deleuze and Guattari’s nomad philosophy. They describe learning as a movement in the interspace. Focus is on process and inquiry, not on achievement of predetermined skills and competences. 

On processing GPS tracking data of car-movements in Borlänge, Sweden

The advancement of GPS technology enables GPS devices not only to be used as orientation and navigation tools, but also to track travelled routes. GPS tracking data provides essential information for a broad range of urban planning applications such as transportation routing and planning, traffic management and environmental control. This paper describes on processing the data that was collected by tracking the cars of 316 volunteers over a seven-week period. The detailed information is extracted. The processed data is further connected to the underlying road network by means of maps. Geographical maps are applied to check how the car-movements match the road network. The maps capture the complexity of the car-movements in the urban area. The results show that 90% of the trips on the plane match the road network within a tolerance.

Women's experiences of two different self-assessment methods for monitoring fetal movements in full-term pregnancy : a crossover trial

Background: Low maternal awareness of fetal movements is associated with negative birth outcomes. Knowledge regarding pregnant women's compliance with programs of systematic self-assessment of fetal movements is needed. The aim of this study was to investigate women's experiences using two different self-assessment methods for monitoring fetal movements and to determine if the women had a preference for one or the other method. Methods: Data were collected by a crossover trial; 40 healthy women with an uncomplicated full-term pregnancy counted the fetal movements according to a Count-to-ten method and assessed the character of the movements according to the Mindfetalness method. Each self-assessment was observed by a midwife and followed by a questionnaire. A total of 80 self-assessments was performed; 40 with each method. Results: Of the 40 women, only one did not find at least one method suitable. Twenty of the total of 39 reported a preference, 15 for the Mindfetalness method and five for the Count-to-ten method. All 39 said they felt calm, relaxed, mentally present and focused during the observations. Furthermore, the women described the observation of the movements as safe and reassuring and a moment for communication with their unborn baby. Conclusions: In the 80 assessments all but one of the women found one or both methods suitable for self-assessment of fetal movements and they felt comfortable during the assessments. More women preferred the Mindfetalness method compared to the count-to-ten method, than vice versa.

On processing GPS tracking data of spatiotemporal car movements : a case study

The advancement of GPS technology has made it possible to use GPS devices as orientation and navigation tools, but also as tools to track spatiotemporal information. GPS tracking data can be broadly applied in location-based services, such as spatial distribution of the economy, transportation routing and planning, traffic management and environmental control. Therefore, knowledge of how to process the data from a standard GPS device is crucial for further use. Previous studies have considered various issues of the data processing at the time. This paper, however, aims to outline a general procedure for processing GPS tracking data. The procedure is illustrated step-by-step by the processing of real-world GPS data of car movements in Borlänge in the centre of Sweden.

Fetal Movements in late Pregnancy : Categorization, Self-assessment, and Prenatal Attachment in relation to women’s experiences

Aim: To explore how pregnant women experience fetal movements in late pregnancy. Specific aims were:  to study women’s experiences during the time prior to receiving news that their unborn baby had died in utero (I), to investigate women’s descriptions of fetal movements (II), investigate the association between the magnitude of fetal movements and level of prenatal attachment (III), and to study women’s experiences using two different self-assessment methods (IV). Methods: Interviews, questionnaires, and observations were used. Results: Premonition that something had happened to their unborn baby, based on a lack of fetal movements, was experienced by the participants. The overall theme “something is wrong” describes the women’s insight that the baby’s life was threatened (I). Fetal movements that were sorted into the domain “powerful movements” were perceived in late pregnancy by 96 % of the participants (II). Perceiving frequent fetal movements on at least three occasions per 24 hours was associated with higher scores of prenatal attachment in all the three subscales on PAI-R. The majority (55%) of the 456 participants reported average occasions of frequent fetal movements, 26% several occasions and 18% reported few occasions of frequent fetal movements, during the current gestational week.  (III). Only one of the 40 participants did not find at least one method for monitoring fetal movements suitable. Fifteen of the 39 participants reported a preference for the mindfetalness method and five for the count-to-ten method. The women described the observation of the movements as a safe and reassuring moment for communication with their unborn baby (IV). Conclusion:  In full-term and uncomplicated pregnancies, women usually perceive fetal movements as powerful. Furthermore, women in late pregnancy who reported frequent fetal movements on several occasions during a 24-hour period seem to have a high level of prenatal attachment. Women who used self-assessment methods for monitoring fetal movements felt calm and relaxed when observing the movements of their babies. They had a high compliance for both self-assessment methods. Women that had experienced a stillbirth in late pregnancy described that they had a premonition before they were told that their baby had died in utero.