What factors affect the destination choice of Jordanian tourists?A panel data analysis

This paper investigates what factors affect the destination choice for Jordanian to 8 countries (Oman, Saudi Arabia, Syria, Tunisia, Yemen, Egypt, Lebanon and Bahrain) using panel data analysis. Number of outbound tourists is represented as dependent variable, which is regressed over five explanatory variables using fixed effect model. The finding of this paper is that tourists from Jordan have weak demand for outbound tourism; Jordanian decision of traveling abroad is determined by the cost of traveling to different places and choosing the cheapest alternative.

The Choice of STIGA Table Tennis Blades : Evidence from China

The purpose of this paper is to investigate how individuals with different characteristics make their choice-decisions when consuming STIGA table tennis blades, which are combinations of various attributes, such as price, control, attack, etc. It is expected that the general trend of choice behavior on this special commodity can be, at least to some extent, revealed. Data were collected using questionnaires sent to registered members of a table tennis club in China. The questionnaires included information and questions about individuals’ monthly income levels, ages, technique styles, etc. A multinomial logit model was then applied to analyze factors determining Chinese consumers’ choice behavior on STIGA table tennis blades. The results indicated that the main element influencing Chinese consumers’ choice of STIGA ping-pong blades was the technique style and other variables did not seem to influence the choice of table tennis blades. These results might be explained by the limited sample size as well as unmeasured and immeasurable factors. Thus, a more extensive research is needed to be conducted in the future.

Factors influencing the choice of a bank : An international student perspective

Purpose: The purposeof this thesis is to identify what factors influence international students in their choice of a bank.Literature review: A review of previous research about bank selection criteria related to students as well as a few examples of bank choice studies in the general population is presented. The review consists of studies from different years to illustrate criteria that reoccur in order to decrease the chances of overlooking important criteria that may be of importance for today‘s customers. Method: The thesis is based upon empirical data gathering through a non-probability sampling technique by distributing questionnaires through the Internet and in person. The data was analyzedwith the help of exploratory factor analysis (EFA). Conclusion: We found thatfive factors influence the choice of bank for international students. These factors are: cost of the bank services, use of technology, convenience, banks‘ reputation and marketing communication effectiveness. These factors could be helpful for banks who want to gain customers from international students, which are a relatively unexploited customer segment.

An Empirical Study on Teachers’ Choice of Extensive Literature in the Swedish Upper Secondary EFL Classroom

The importance of extensive literature reading in the English as a Foreign Language (EFL) context has been given increasing attention in recent research. Literature reading is also a required part of the national syllabi of the (EFL) courses offered to both adolescents and adults at Upper Secondary level in Sweden. This thesis aims to investigate the teachers’ process of making literature choices for extensive reading in upper secondary EFL courses in Sweden. Eight teachers of three different student groups took part in the study, representing adolescent university preparatory programs and vocational programs, as well as programs for adult students. Questionnaires were used and the data was analyzed for patterns revealing three main factors affecting teachers’ literature choice: language proficiency, reading experience and contextual factors. These three factors were fitted into the theoretical framework of psycholinguistic and sociolinguistic reading models, with the addition of a perspective of motivational research. The results of this survey underline the importance of extensive reading, according to teachers, and that motivation for literature choice can be primarily related to factors associated with psycholinguistic reading models. The survey also points to the need for further investigating of teachers’ own experiences of literature reading, searching for deeper motivational factors which influence teaching choices. Another future field of research is the choice of reading activities assigned together with the chosen literature, which probably also influence teachers’ choices in the Swedish EFL classroom.

English, Swedish or both? : An empirical study on teachers’ choice of language in the EFL classroom

There are different ideas when it comes to the use of either Swedish or English during EFL lessons. Therefore, the aim of this study was to investigate teachers’ choice of language in the upper elementary EFL classroom in Swedish schools and their arguments for the use of one or the other. In order to find out which language different teachers use and why, semi-structured interviews with six different teachers were carried out. All respondents were currently teaching English in grade 4-6. The results of the study show that the teachers’ most commonly used language in the EFL classroom is English. However, several of the teachers mention that they also use Swedish, for example when it comes to explaining difficult instructions or grammar. All teachers participating in this study mention the importance of hearing and using English in order for the pupils to learn English and therefore they try to use mostly English. Nevertheless, this study only has six participants, all living in the same county and working at schools with many similarities, which makes it difficult to draw any generalizable conclusions. To be able to draw better conclusions, a study would have to be conducted with more participants within a larger area.

The effects of attitudes and personality traits on mode choice

We hypothesise that differences in people's attitudes and personality traits lead them to attribute varying importance to environmental considerations, safety, comfort, convenience and flexibility. Differences in personality traits call be revealed not only in the individuals' choice of transport, but also in other actions of their everyday lives-such as how much they recycle, whether they take precautions or avoid dangerous pursuits. Conditioning on a set of exogenous individual characteristics, we use indicators of attitudes and personality traits to form latent variables for inclusion in an, otherwise standard, discrete mode choice model. With a sample of Swedish commuters, we find that both attitudes towards flexibility and comfort, as well as being pro-environmentally inclined, influence the individual's choice of mode. Although modal time and cost still are important, it follows that there are other ways, apart from economic incentives, to attract individuals to the, from society's perspective, desirable public modes of transport. Our results should provide useful information to policy-makers and transportation planners developing sustainable transportation systems.

Heat losses and thermal performance of commercial combined solar and pellet heating systems

Various pellet heating systems are marketed in Sweden, some of them in combination with a solar heating system. Several types of pellet heating units are available and can be used for a combined system. This article compares four typical combined solar and pellet heating systems: System 1 and 2 two with a pellet stove, system 3 with a store integrated pellet burner and system 4 with a pellet boiler. The lower efficiency of pellet heaters compared to oil or gas heaters increases the primary energy demand. Consequently heat losses of the various systems have been studied. The systems have been modeled in TRNSYS and simulated with parameters identified from measurements. For almost all systems the flue gas losses are the main heat losses except for system 3 where store heat losses prevail. Relevant are also the heat losses of the burner and the boiler to the ambient. Significant leakage losses are noticed for system 3 and 4. For buildings with an open internal design system 1 is the most efficient solution. Other buildings should preferably apply system 3. The right choice of the system depends also on whether the heater is placed inside or outside of the heated are. A large potential for system optimization exist for all studied systems, which when applied could alter the relative merits of the different system types.

The Optimal trigger speed of vehicle activated signs

The thesis aims to elaborate on the optimum trigger speed for Vehicle Activated Signs (VAS) and to study the effectiveness of VAS trigger speed on drivers’ behaviour. Vehicle activated signs (VAS) are speed warning signs that are activated by individual vehicle when the driver exceeds a speed threshold. The threshold, which triggers the VAS, is commonly based on a driver speed, and accordingly, is called a trigger speed. At present, the trigger speed activating the VAS is usually set to a constant value and does not consider the fact that an optimal trigger speed might exist. The optimal trigger speed significantly impacts driver behaviour. In order to be able to fulfil the aims of this thesis, systematic vehicle speed data were collected from field experiments that utilized Doppler radar. Further calibration methods for the radar used in the experiment have been developed and evaluated to provide accurate data for the experiment. The calibration method was bidirectional; consisting of data cleaning and data reconstruction. The data cleaning calibration had a superior performance than the calibration based on the reconstructed data. To study the effectiveness of trigger speed on driver behaviour, the collected data were analysed by both descriptive and inferential statistics. Both descriptive and inferential statistics showed that the change in trigger speed had an effect on vehicle mean speed and on vehicle standard deviation of the mean speed. When the trigger speed was set near the speed limit, the standard deviation was high. Therefore, the choice of trigger speed cannot be based solely on the speed limit at the proposed VAS location. The optimal trigger speeds for VAS were not considered in previous studies. As well, the relationship between the trigger value and its consequences under different conditions were not clearly stated. The finding from this thesis is that the optimal trigger speed should be primarily based on lowering the standard deviation rather than lowering the mean speed of vehicles. Furthermore, the optimal trigger speed should be set near the 85th percentile speed, with the goal of lowering the standard deviation.

How do different densities in a network affect the optimal location of service centers?

The p-median problem is often used to locate p service centers by minimizing their distances to a geographically distributed demand (n). The optimal locations are sensitive to geographical context such as road network and demand points especially when they are asymmetrically distributed in the plane. Most studies focus on evaluating performances of the p-median model when p and n vary. To our knowledge this is not a very well-studied problem when the road network is alternated especially when it is applied in a real world context. The aim in this study is to analyze how the optimal location solutions vary, using the p-median model, when the density in the road network is alternated. The investigation is conducted by the means of a case study in a region in Sweden with an asymmetrically distributed population (15,000 weighted demand points), Dalecarlia. To locate 5 to 50 service centers we use the national transport administrations official road network (NVDB). The road network consists of 1.5 million nodes. To find the optimal location we start with 500 candidate nodes in the network and increase the number of candidate nodes in steps up to 67,000. To find the optimal solution we use a simulated annealing algorithm with adaptive tuning of the temperature. The results show that there is a limited improvement in the optimal solutions when nodes in the road network increase and p is low. When p is high the improvements are larger. The results also show that choice of the best network depends on p. The larger p the larger density of the network is needed. 

A Linguistic Analysis of the Written Production of Second Language Learners : The Variation of Article Usage by Adult Chinese Learners of English

This study aims to test Robertson’s lexical transfer principle, which posits that Chinese learners use demonstratives (particularly this) and the numeral one as markers of definiteness and indefiniteness. This is tested by analysing Chinese learners’ written production collected from the Spoken and Written English Corpus of Chinese Learners 2.0 (SWECCL 2.0). The purpose is to understand the variation of article usage by adult Chinese learners of English. More specifically, the study examines to what extent articles, possessive and demonstrative pronouns are used in Chinese learners’ English and how definite and indefinite articles are used by the Chinese learners. Findings suggest that Robertson’s lexical transfer principle was corroborated by the present study. In addition, Chinese learners prefer to use demonstrative determiners, the possessive determiner our, and the numeral one to perform the function of marking definiteness and indefiniteness. In particular, the learners try to use the demonstrative determiners that and this in the anaphoric function instead of the definite article, and the demonstrative determiner those is frequently used in the cataphoric function. What is more, the learners use the numeral one as a marker of indefiniteness, and it is also used as a marker of definiteness in the anaphoric function. Further, the possessive determiner our is used as a marker of definiteness in larger situation uses referring to something unique. To this end, the study is able to show that the definite article is used to perform the function of marking indefiniteness, and in some particular contexts the definite article functions as a Chinese specifier in Chinese learners’ English. Also, the indefinite article is frequently used in quantifier phrases but is rarely used in other functions. There are three main reasons that may explain why Chinese learners use determiners variously. Firstly, the choice of determiners by Chinese learners is influenced by linguistic contexts. Secondly, because of learning strategies, Chinese learners try to ignore the anaphoric function and cataphoric function that they are not yet ready to process in article usage. Thirdly, interlanguage grammar influences the optionality in the use of articles. 

The use of capital budgeting and cost of capital estimation methods in Swedish listed companies

In this paper Swedish listed companies’ use of capital budgeting and cost of capital estimation methods in 2005 and 2008 are examined. The relation between company characteristics and choice of methods is investigated and both within-country longitudinal and cross-country comparisons are made. Larger companies seem to have used capital budgeting methods more frequently than smaller companies. When compared to U.S. and continental European companies, Swedish listed companies employed capital budgeting methods less frequently. In 2005 the most common method for establishing the cost of equity was by asking the investors what return they required. By 2008 CAPM was instead the most utilised method, which could indicate greater sophistication. The use of project risk when evaluating investments also seems to have gained in popularity, while the use of company risk declined. Overall, the use of sophisticated capital budgeting and cost of capital estimation methods seem to be rising and the use of less sophisticated methods declining.

Radiation properties of coil-coated steel in building envelope surfaces and the influence on building thermal performance

Recent studies have shown that the optical properties of building exterior surfaces are important in terms of energy use and thermal comfort. While the majority of the studies are related to exterior surfaces, the radiation properties of interior surfaces are less thoroughly investigated. Development in the coil-coating industries has now made it possible to allocate different optical properties for both exterior and interior surfaces of steel-clad buildings. The aim of this thesis is to investigate the influence of surface radiation properties with the focus on the thermal emittance of the interior surfaces, the modeling approaches and their consequences in the context of the building energy performance and indoor thermal environment. The study consists of both numerical and experimental investigations. The experimental investigations include parallel field measurements on three similar test cabins with different interior and exterior surface radiation properties in Borlänge, Sweden, and two ice rink arenas with normal and low emissive ceiling in Luleå, Sweden. The numerical methods include comparative simulations by the use of dynamic heat flux models, Building Energy Simulation (BES), Computational Fluid Dynamics (CFD) and a coupled model for BES and CFD. Several parametric studies and thermal performance analyses were carried out in combination with the different numerical methods. The parallel field measurements on the test cabins include the air, surface and radiation temperatures and energy use during passive and active (heating and cooling) measurements. Both measurement and comparative simulation results indicate an improvement in the indoor thermal environment when the interior surfaces have low emittance. In the ice rink arenas, surface and radiation temperature measurements indicate a considerable reduction in the ceiling-to-ice radiation by the use of low emittance surfaces, in agreement with a ceiling-toice radiation model using schematic dynamic heat flux calculations. The measurements in the test cabins indicate that the use of low emittance surfaces can increase the vertical indoor air temperature gradients depending on the time of day and outdoor conditions. This is in agreement with the transient CFD simulations having the boundary condition assigned on the exterior surfaces. The sensitivity analyses have been performed under different outdoor conditions and surface thermal radiation properties. The spatially resolved simulations indicate an increase in the air and surface temperature gradients by the use of low emittance coatings. This can allow for lower air temperature at the occupied zone during the summer. The combined effect of interior and exterior reflective coatings in terms of energy use has been investigated by the use of building energy simulation for different climates and internal heat loads. The results indicate possible energy savings by the smart choice of optical properties on interior and exterior surfaces of the building. Overall, it is concluded that the interior reflective coatings can contribute to building energy savings and improvement of the indoor thermal environment. This can be numerically investigated by the choice of appropriate models with respect to the level of detail and computational load. This thesis includes comparative simulations at different levels of detail.

Effects of computer reminders on complications of peripheral venous catheters and nurses' adherence to a guideline in paediatric care : a cluster randomised study

BACKGROUND: Reminder systems in electronic patient records (EPR) have proven to affect both health care professionals' behaviour and patient outcomes. The aim of this cluster randomised trial was to investigate the effects of implementing a clinical practice guideline (CPG) for peripheral venous catheters (PVCs) in paediatric care in the format of reminders integrated in the EPRs, on PVC-related complications, and on registered nurses' (RNs') self-reported adherence to the guideline. An additional aim was to study the relationship between contextual factors and the outcomes of the intervention. METHODS: The study involved 12 inpatient units at a paediatric university hospital. The reminders included choice of PVC, hygiene, maintenance, and daily inspection of PVC site. Primary outcome was documented signs and symptoms of PVC-related complications at removal, retrieved from the EPR. Secondary outcome was RNs' adherence to a PVC guideline, collected through a questionnaire that also included RNs' perceived work context, as measured by the Alberta Context Tool. Units were allocated into two strata, based on occurrence of PVCs. A blinded simple draw of lots from each stratum randomised six units to the control and intervention groups, respectively. Units were not blinded. The intervention group included 626 PVCs at baseline and 618 post-intervention and the control group 724 PVCs at baseline and 674 post-intervention. RNs included at baseline were 212 (65.4 %) and 208 (71.5 %) post-intervention. RESULTS: No significant effect was found for the computer reminders on PVC-related complications nor on RNs' adherence to the guideline recommendations. The complication rate at baseline and post-intervention was 40.6 % (95 % confidence interval (CI) 36.7-44.5) and 41.9 % (95 % CI 38.0-45.8), for the intervention group and 40.3 % (95 % CI 36.8-44.0) and 46.9 % (95 % CI 43.1-50.7) for the control. In general, RNs' self-rated work context varied from moderately low to moderately high, indicating that conditions for a successful implementation to occur were less optimal. CONCLUSIONS: The reminders might have benefitted from being accompanied by a tailored intervention that targeted specific barriers, such as the low frequency of recorded reasons for removal, the low adherence to daily inspection of PVC sites, and the lack of regular feedback to the RNs. TRIAL REGISTRATION: Current Controlled Trials ISRCTN44819426.

What determines the use of capital budgeting methods? : Evidence from Swedish listed companies

Purpose: This paper aims to extend and contribute to prior research on the association between company characteristics and choice of capital budgeting methods (CBMs). Design/methodology/approach: A multivariate regression analysis on questionnaire data from 2005 and 2008 is used to study which factors determine the choice of CBMs in Swedish listed companies. Findings: Our results supported hypotheses that Swedish listed companies have become more sophisticated over the years (or at least less unsophisticated) which indicates a closing of the theory-practice gap; that companies with greater leverage used payback more often; and that companies with stricter debt targets and less management ownership employed accounting rate of return more frequent. Moreover, larger companies used CBMs more often. Originality/value: The paper contributes to prior research within this field by being the first Swedish study to examine the association between use of CBMs and as many as twelve independent variables, including changes over time, by using multivariate regression analysis. The results are compared to a US and a continental European study.