Utredning om huruvida Dalarnas Tidningars produktion passar en KBA Cortina

This degree project illustrates newsprint and waterless offset. A new news press was introduced at Drupa-00, Cortina from KBA, which is the first news press dedicated the waterless technique. With actual statistics from the company in question an investigation was made whether their production fits this press. It came out in the investigation that the production of the company, from statistics, fits this press very good. A table was made where different timeschedules were accounted for the new press, with semi- and full automatic plate changing for present and to be added papers. The waterless technology is compared to conventional offset with the difference that the plate is based on a sort of laminatetechnology. Like conventional plates this plate has a base made of aluminium. Lightsensitive photopolymer isunited as a layer or coat on top of the aluminium and a 2µm thin oleophobic siliconlayer is applied on top of the photopolymer. Considering the print, the waterless method has a higher qualitygrade than conventional offset. No water is emulsifiedin the ink, and therefore the printed dot gets a higher density. The loss of dampening solution and higher tack of the ink gives sharper dots. This makes the colourspace bigger why a greater range of colours can be printed. The loss of dampening solution gives a more stable dotgain, which contributes to that a higher screen can be used. The disadvantage is that the plate can't do as many rotations as the conventional plate. A waterless plate makes around 100 000-500 000 rotations before it needs to be removed owing to type- and manufacturer of the plate. The plate is also slightly more sensitive and expensive than conventional plates, around 1,4 - 1,7 × aluminium printing plates. A waterless system can be installed in a conventional printing press by degrees and when large editions are being printed a cooler needs to be installed in the oscillationrollers of the press, since an increase in temperature can make the oleophobic parts of the plate oleophilic. The Cortina is however equipped with a temperature controlsystem at the beginning. To avoid picking, caused by the tacky ink, a blanket with a high “quick release” should be used.

Framtagning av ICC-profil för VTAB Backa

The following degree project deals with the production of an ICC-profile, this in the form ofproducing ICC-profiles for VTAB Backa. The company previously had their own profile butthey weren’t satisfied, so earlier this year they started using the TU standard profile, but theyalso wanted a complement to this in form of a profile created for solely their printing press.The separation settings used when creating the new profiles were based on information fromTU and their profile. Two basic profiles were created and then edited to obtain a better result.The test printings made with the edited profiles showed that the less adjustments that are made,the better. It was also discovered that the TU standard profile eliminates the highlight toneswhiles the new profiles are somewhat darker. VTAB Backa has at the end of this degree projectdesided to conduct more test printings before making their decision.

Print quality study of a laboratory offset press

PAPRO operates within the Forest Research company and their mission is to develop value-addingindustry solutions. At present there are no good ways for mills to easily test the printing quality on newsprintpaper. There is a great need for a fast way to do this on different paper qualities; with a laboratory-offset press this can be both a time and money saving method. At PAPRO Forest Research, NewZealand, a laboratory offset press has been developed and designed, during the past seven years, concerningthis issue. Earlier projects were made concerning the press, e.g. to establish the optimal settings.The mission with this project was to partly determine the present variability of the print quality andto evaluate if the fountain solution, distilled water and 2% Diol green concentrate, used at the momentmixed with different percentages of Isopropanol could decrease the variability and contribute to morestabile results. Throughout the whole project the print quality showed a high variation and was evenmore variable when the Isopropanol was added. All in all 50 print rounds times twelve printed paperstrips was carried out through the project divided into three parts. To analyse the print quality, amicroscope with an image capture camera has been used. Data from the taken images was analysedand inserted into charts to see the variations.The conclusions of the whole project are not satisfying because no final evaluations were possible tomake. Main conclusions are that the additive of Isopropanol to the ordinary fountain solution, used atpresent, only contributed to more unstable results of the print quality. And it seems to be difficult toget some stable results from the lab press as long as the room where it is placed is not fully conditionedas required for the process of offset printing. And the fact that the airbrush which applies theamount of fountain solution is also variable, as shown in earlier projects, which contributes to unstableresults as well. For further work more exact parameters as a conditioned room are required and thepossibility to further design the laboratory press to use waterless offset printing instead.

The stability of AM and FM screenings in different water conditions – with the mottle under consideration

This project was performed at Rochester Institute of Technology to get more understanding and knowledge about AM and FM screenings similarities and differences with considerations of the mottle. By designing a test form conformed to the specific measurements and printing it on Heidelberg's Sunday 2000 press, the project group has evaluated the questions that already existed and the ones that occurred during the project. Hence the first press run left some unexpected phenomenon therefore another press run was performed. Measurements were performed and graphs produced in Excel. The project group evaluated the results and from that able to establish facts and draw conclusions. It has been a great experience for the project group and they have learnt a lot.

Paper dimensional stability in sheet-fed offset printing : Papperets dimensionsstabilitet i en arkoffsetpress

In offset printing, dampening solution is used to create a good balance in the process. If too much water is transferred to the paper, the sheet can change its size between the printing units, due to water absorption, and cause a problem with the colour register. This phenomenon is usually referred to as fanout. In this degree project, an investigation was made to see if the paper dimensions changed through its way in the sheet-fed printing process. The instrument Luchs Register Measuring Systems (Lynx) was used, and a method for measuring if the paper changed its dimensions with this instrument, was developed. Paper qualities with three different grammages were used, 90, 130 and 250 gsm. This investigation showed that all paper qualities changed their size with widening in the gripper edge in the range of 10 - 70 µm and in the trailing edge the increase was 10 - 130 µm. The elongations of the papers were in the range of 10- 300 µm. The papers with lowest grammage changed more than the heavier. To see if the print had been affected of the widening and elongation, print quality parameters like relative contrast, dot gain and mottle were correlated with the Lynx data from the sheets. The group of papers that gave correlations were in 130 gsm. The sheets had visual doubling and the combined standard deviation from the Lynx marks K3, K5 and K21 correlated with dot gain. When the variations increased so did the dot gain and this indicates that the doubling was due to the widening. There was also a correlation between the standard deviation from K3 and Mottle. The sheets widened with an average of 30 µm in the gripper edge and since there probably were doubling due to widening it also affected the Mottle values. What the widening depends on is hard to tell. Since widening was so small, it could be due to water absorption, papers being ironed out or maybe the sheets have been flattened out. It probably needs a more detailed investigation to find out what causes the widening. Further investigations about how print quality is affected by the register accuracy of a printing machine should include a print form with measuring areas close to the Lynx marks. The measuring areas should contain fine hairlines, negative text printed with at least two colours and some pictures to evaluate together with standard measuring should give a good knowledge about the subject.

Ink-Jet Printing of Color Optical Filters for LCD Applications

At the age of multi-media, portable electronic devices such as mobile phones, personal digital assistant and handheld gaming systems have increased the demand for high performance displays with low cost production. Inkjet printing color optical filters (COF) for LCD applications seem to be an interesting alternative to decrease the production costs. The advantage of inkjet printing technology is to be fast, accurate, easy to run and cheaper than other technologies. In this master thesis work, we used various disciplines such as optical microscopy, rheology, inkjet printing, profilometering and colorimetry. The specific aim of the thesis was to investigate the feasibility of using company-A pigment formulation in inkjet production of COF for active matrix LCD applications. Ideal viscosity parameters were determined from 10 to 20mPa·s for easy inkjet printing at room temperature. The red pigments used are fully dispersed into the solvent and present an excellent homogenous repartition after printing. Thickness investigations revealed that the printed COF were equal or slightly thicker than typically manufactured ones. The colorimetry investigations demonstrated color coordinates very close to the NTSC red standard. LED backlighting seems to be a valuable solution to combine with the printed COF regarding to the spectrum and color analysis. The results on this thesis will increase the understanding of inkjet printing company-A pigments to produce COF for LCD applications.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Utvärdering av ICC-profiler och profil-inställningar för HP Indigo Press 1000

Det nystartade digitaltryckeriet Digaloo planerar att inom en snar framtid införa ICC-hantering i sittarbetsflöde. Med anledning av detta har en studie utförts där antalet erfordrade ICC-profiler undersöktssamt vilka akromatiska inställningar som bäst lämpar sig för tryckeriets HP Indigo Press 1000.Testtryckning utfördes på sex av Digaloos mest använda papperskvaliteter. Genom inläsning av testkartorhar de olika papperskvaliteternas reproducerbara färgrymder åskådliggjorts. Grundat på resultatetfrån denna testtryckning framställdes ICC-profiler för valda papperskvaliteter. Dessa genereradesmed olika inställningar för akromatisk repro och TIC (Total Ink Coverage). Vid en andra testtryckninganvändes dessa ICC-profiler för konvertering av mellanton-, natt- och snöbilder, vilka trycktespå olika papperskvaliteter.Resultatet från den första testtryckningen visar att HP Indigo Press 1000 återger störst förgrymd påpapperskvaliteten Silverblade Silk, tätt följd av Silverblade Art. De minsta färgrymderna reproduceraspå Lessebo Linné Gultonat och Lessebo Linné Naturvit.Vid perceptuell bedömning av de olika bilderna blev resultatet att bäst tryckresultat uppnås medpappersspecifika ICC-profiler. Detta gäller dock endast i två av tre fall. Vid bedömning av bäst lämpadTIC ansågs den idag på Digaloo använda nivån som mycket dålig. Genom att antingen sänka eller höjadenna nivå bedömdes tryckresultatet öka i kvalitet.Slutligen visar studien även att akromatik i form av UCR ger bäst bildåtergivning i mellanton- ochnattbilder på de valda papperskvaliteterna. De olika graderna av GCR i snöbilder anses dock passaolika bra beroende på vilken papperskvalitet som används.

Utvärdering av kvalité och dess behov inom förprovtryck

It always has been a need for the abiltiy to create color proofs. When an error occurs late in the production process, itis allways complicated and difficult to correct the error. In this project, digital proofs been made and discussions havebeen held with several people in the printing industry, in order to examine how well excisting digital proofs, meet thedemand of the market. And how close the digital proofs can come to the actual printsheat from the press. The study hasbeen shown that the one thing that has had the most influence on the outcome for the quality of a digital proof, is theprintshop operator’s knowledge about color management and proofing systems. Many advertising agencies in the graphicindustry think rasterised proofs are not necessesary and expensive. Therefor they prefer a cheaper alternative, whichdoesn’t show colors as well as the rasterised proof, but well enough to be content with it. There are a good awarenessconcerning lack of communication between printshop, reproduction and advertising agency. Advertising agencies thinkthat printshop rarely listen to what they have to say, while the printshop think that the advertising agency doesn’t understandwhat they are trying to tell them. The outcome of the printed proofs in this study can’t be representive for howgood digital proofs are conducted in regular basis in the industry. The divergence between the print press sheat and thedigital proof that was made was bigger than expected. This shows that implementation of ICC profiles in a color managementflow, not alone is the answer to making perfect digital proofs. There are so many other issues that has to be examined,like color management software, measure tools and correct color management module. In order to make a perfectproof, you have to look at the whole picture. In the end, the human eye finally has the last word on wheather theproof is good or not.

Print quality study of newsprint : Further development of the laboratoryoffset press at PAPRO

A laboratory offset press has been developed over the last five years at PAPRO for testing print qualityon newsprint, as at present, there is no good way for the mills to test this issue. In this project a comparisonhas been made between a laboratory offset press and a commercial press to see if the laboratoryoffset press can be used as a reliable test method or if a further development is needed.To evaluate the method, similar papers have been printed in both presses and compared using imageanalysis techniques. All together eighteen samples were tested which is enough to give comparableresults. The print quality showed a high variation, the values from the laboratory offset press and thecommercial press were not following the same trends. At present time the laboratory offset press needsome further development before it can be used as a reliable test method for halftone prints. Even sosome conclusions were made.The newsprint that has been used came from Norske Skog Tasman Mill (Kawerau), since the otheraim of this project was to do a repeatability study of their three existing paper machines to distinguishpossible differences in the production. The paper samples were taken from each paper machine on sixdifferent dates to give a representative result. This also gave the opportunity to compare the machinesbetween themselves. Comparison between the machines shows that the wire side gives a better andmore even result than the topside on the prints from the laboratory offset press. According to the resultfrom the commercial press the wire side shows a higher degree of variability. Samples from papermachine 2 and 3 were less variable and had the lowest standard deviation of grey level for solid areas.This suggests that newsprints from PM 2 and PM 3 give a more even print quality with a better inkcoverage.

Trycksaker till Utvecklingshuset och Skönhetsbanken

A number of publications has been produced for two companies in Dalarna, Utvecklingshuset andSkönhetsbanken.Utvecklingshuset is working, among other things, with stressyndroms and by treating crises. Theirpublications consist of a number of product sheets, a folder and a brochure. They want to use the publicationsfor information to their customers.Skönhetsbanken is a beauty saloon who will have a brochure to mediate the services they can offer.Photos have been taken, existing and for this purpose written texts have been used.The softwares Adobe Photoshop 7.0 and Adobe Indesign 2.0 have been used for all publications andthe work with producing these has been satisfactory.The effect of a good cooperation with the companies has resulted in that they are pleased with thepublications and feel that they have been part of the end of the results.All of the publications have been or will be printed with digital printing methods, which is the reasonfor the choice of the litterature survey.The survey deals with, among other things, how the digital press works, which papers that are suitable,economic aspects and what a graphic designer should have in mind when it comes to graphic productsthat will be printed with digital printing methods.

Kvalitetssäkring av Clas Ohlson AB´s grafiska produktionsflöde

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow. Wrong colorspaces andCMYK-profiles was used in big extent, the displays where uncalibrated or incorrectly calibrated, wrong PDF-presetswas used frequently and it also showed that six different suppliers for their printing materials were used. The solutionsthat were relevant for the problems and defects were later on presented as proposals on measures.

Printing colour hard proofs using EFI Colorproof XF v. 3.1 and Photoshop CS3, and production substrates.

EFI Colorproof XF was found to be more convenient from a user’s aspect, and had features which are covered in the ISO 12647-7 standard (e.g. the ability to simulate screening and print margin information), which Photoshop CS3 lacked. None of the proofing systems distinguished itself in a clear way from the other; sometimes, on certain substrates, Photoshop CS3 produced most accurate colours, sometimes EFI Colorproof XF did. Further investigations need to be carried out to tell more exactly which system produce most accurate colours. Only 6 out of 34 simulation-combinations had colours within the tolerances in the standard. The result also shows that the production substrates should not be used as proofing substrates. Instead the proofing papers especially made for ink jet should be used to obtain more colour-accurate prints.

Hårdare tag i arbetslivet? : Åtgärder mot arbetsrelaterat våld i facklig press 1978–2004

Preventing violence at work: A study of descriptions of safety measures in Swedish trade union journals 1978–2004 The purpose of this study is to examine if perceptions of interventions aimed at violence in the workplace have changed since the 1970s. In the beginning of the study period, structural factors are seen as the dominating explanation for workplace violence. The crime perspective rises in the 1990’s and methods of intervention becomes the control- and justice functions of larger society. The result shows search for accountability to be a salient factor for understanding the development towards an increasing use of penal sanctions.