Print quality study of newsprint : Further development of the laboratoryoffset press at PAPRO

A laboratory offset press has been developed over the last five years at PAPRO for testing print qualityon newsprint, as at present, there is no good way for the mills to test this issue. In this project a comparisonhas been made between a laboratory offset press and a commercial press to see if the laboratoryoffset press can be used as a reliable test method or if a further development is needed.To evaluate the method, similar papers have been printed in both presses and compared using imageanalysis techniques. All together eighteen samples were tested which is enough to give comparableresults. The print quality showed a high variation, the values from the laboratory offset press and thecommercial press were not following the same trends. At present time the laboratory offset press needsome further development before it can be used as a reliable test method for halftone prints. Even sosome conclusions were made.The newsprint that has been used came from Norske Skog Tasman Mill (Kawerau), since the otheraim of this project was to do a repeatability study of their three existing paper machines to distinguishpossible differences in the production. The paper samples were taken from each paper machine on sixdifferent dates to give a representative result. This also gave the opportunity to compare the machinesbetween themselves. Comparison between the machines shows that the wire side gives a better andmore even result than the topside on the prints from the laboratory offset press. According to the resultfrom the commercial press the wire side shows a higher degree of variability. Samples from papermachine 2 and 3 were less variable and had the lowest standard deviation of grey level for solid areas.This suggests that newsprints from PM 2 and PM 3 give a more even print quality with a better inkcoverage.

Troubleshooting med avseende på avsättningar på gummiduk, Bobergs tryckeri AB

Bobergs printing house in Falun has during some time had problems regarding deposits on blankets intheirs Müller Martini UV-printing presses. Deposits appear in both image areas and non-image areas.These areas have been analyzed and the deposits on non-image areas contain chalk, clay and talc. Thequestion remains how these material bond to the blanket surface. The chalk and clay comes from thepaper. The talc comes from the ink. Deposits from image areas contain pigment and talc from the printingink. The dampening water has also been analyzed. The result shows some sort of problem with thehardness regulator for the clean water. The pH-level should be increased a few steps.

Kvalitetssäkring av Clas Ohlson AB´s grafiska produktionsflöde

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow. Wrong colorspaces andCMYK-profiles was used in big extent, the displays where uncalibrated or incorrectly calibrated, wrong PDF-presetswas used frequently and it also showed that six different suppliers for their printing materials were used. The solutionsthat were relevant for the problems and defects were later on presented as proposals on measures.

Variabeltryck med inkjet i dagspress : Möjligheten att införa anpassade upplagor

På uppdrag av Tidningsutgivarna har en studie utförts angående olika möjligheter att införa tryck av variabeldata med tryckmetoden inkjet i svensk dagspress. Målet var att undersöka tekniska möjligheter och begränsningar samt att utreda om det fanns något intresse på marknaden som skulle kunna ge någon avkastning. Studien utfördes med hjälp av noggranna källstudier och ett fortlöpande samarbete med olika företag med intresse för dagspress. Rapporten beskriver också företag som arbetar med den här typen av innovationer idag och diverse tidigare projekt med variabeltryckta tidningar. Nya teknologier som eventuellt kan vara av intresse för framtida utveckling har också beskrivits och hur tidningens framtid kommer att se ut ur ett kortare och ett längre perspektiv. Studien visar att inkjetpressar inte klarar av den hastighet som de moderna tidningspressarna håller idag. Men i takt med minskade upplagor och utvecklad teknologi, samt ett stort marknadsmässigt intresse så tyder det på att det kommer att finnas möjlighet att tillverka anpassade digitaltryckta tidningsupplagor inom en överskådlig framtid. Inkjet kan fungera som ett bra komplement till offset. Inlinepressar ger möjligheten att införa variabeltryck i stora tidningsupplagor medan separata inkjetpressar passar bra för tryck av mindre lokala upplagor.