Movements and mechanical stresses in gas-filled flat plate solar collectors

Sealed gas filled flat plate solar collectors will have stresses in the material since volume and pressure varies in the gas when the temperature changes. Several geometries were analyzed and it could be seen that it is possible reducing the stresses and improve the safety factor of the weakest point in the construction by using larger area and/or reducing the distance between glass and absorber and/or change width and height relationship so the tubes are getting longer. Further it could be shown that the safety factor won't always get improved with reinforcements. It is so because when an already strong part of the collector gets reinforced it will expose weaker parts for higher stresses. The finite element method was used for finding out the stresses.

Gas-filled, flat plate solar collectors

This work treats the thermal and mechanical performances of gas-filled, flat plate solar collectors in order to achieve a better performance than that of air filled collectors. The gases examined are argon, krypton and xenon which all have lower thermal conductivity than air. The absorber is formed as a tray connected to the glass. The pressure of the gas inside is near to the ambient and since the gas volume will vary as the temperature changes, there are potential risks for fatigue in the material. One heat transfer model and one mechanical model were built. The mechanical model gave stresses and information on the movements. The factors of safety were calculated from the stresses, and the movements were used as input for the heat transfer model where the thermal performance was calculated. It is shown that gas-filled, flat plate solar collectors can be designed to achieve good thermal performance at a competitive cost. The best yield is achieved with a xenon gas filling together with a normal thick absorber, where normal thick means a 0.25 mm copper absorber. However, a great deal of energy is needed to produce the xenon gas, and if this aspect is taken into account, the krypton filling is better. Good thermal performance can also be achieved using less material; a collector with a 0.1 mm thick copper absorber and the third best gas, which is argon, still gives a better operating performance than a common, commercially produced, air filled collector with a 0.25 mm absorber. When manufacturing gas-filled flat plate solar collectors, one way of decreasing the total material costs significantly, is by changing absorber material from copper to aluminium. Best yield per monetary outlay is given by a thin (0.3 mm) alu-minium absorber with an argon filling. A high factor of safety is achieved with thin absorbers, large absorber areas, rectangular constructions with long tubes and short distances between glass and absorber. The latter will also give a thin layer of gas which gives good thermal performance. The only doubtii ful construction is an argon filled collector with a normal thick (> 0.50 mm) aluminium absorber. In general, an assessment of the stresses for the proposed construction together with appropriate tests are recommended before manufacturing, since it is hard to predict the factor of safety; if one part is reinforced, some other parts can experience more stress and the factor of safety actually drops.

Thermal losses in sealed, gas-filled flat plate solar collectors

A sealed space between absorber and cover glass makes it possible reducing the influence of humidity condensate and dust at the same time as the enclosed space can be filled with a suitable gas for lowering the losses. This paper is about the size of the losses in these collectors. A calculating model of a gas-filled flat plate solar collector was built in Matlab with standard heat transfer formulas. It showed that the total loss can be reduced up to 20% when changing to an inert gas. It is also possible using a much shorter distance and still achieve low losses at the same time as the mechanical stresses in the material is reduce.

'Moving On' and Transitional Bridges : Studies on migration, violence and wellbeing in encounters with Somali-born women and the maternity health care in Sweden

During the latest decade Somali-born women with experiences of long-lasting war followed by migration have increasingly encountered Swedish maternity care, where antenatal care midwives are assigned to ask questions about exposure to violence. The overall aim in this thesis was to gain deeper understanding of Somali-born women’s wellbeing and needs during the parallel transitions of migration to Sweden and childbearing, focusing on maternity healthcare encounters and violence. Data were obtained from medical records (paper I), qualitative interviews with Somali-born women (II, III) and Swedish antenatal care midwives (IV). Descriptive statistics and thematic analysis were used. Compared to pregnancies of Swedish-born women, Somali-born women’s pregnancies demonstrated later booking and less visits to antenatal care, more maternal morbidity but less psychiatric treatment, less medical pain relief during delivery and more emergency caesarean sections and small-for-gestational-age infants (I). Political violence with broken societal structures before migration contributed to up-rootedness, limited healthcare and absent state-based support to women subjected to violence, which reinforced reliance on social networks, own endurance and faith in Somalia (II). After migration, sources of wellbeing were a pragmatic “moving-on” approach including faith and motherhood, combined with social coherence. Lawful rights for women were appreciated but could concurrently risk creating power tensions in partner relationships. Generally, the Somali-born women associated the midwife more with providing medical care than with overall wellbeing or concerns about violence, but new societal resources were parallel incorporated with known resources (III). Midwives strived for woman-centered approaches beyond ethnicity and culture in care encounters, with language, social gaps and divergent views on violence as potential barriers in violence inquiry. Somali-born women’s strength and contentment were highlighted, and ongoing violence seldom encountered according to the midwives experiences (IV). Pragmatism including “moving on” combined with support from family and social networks, indicate capability to cope with violence and migration-related stress. However, this must be balanced against potential unspoken needs at individual level in care encounters.With trustful relationships, optimized interaction and networking with local Somali communities and across professions, the antenatal midwife can have a “bridging-function” in balancing between dual societies and contribute to healthy transitions in the new society.