Kriminalitetens geografi : vardagsbrottslighetens spatiala fördelning i Borlänge

The aim of this thesis is to describe and analyze the geographical distribution of everyday criminality in the town of Borlänge during the year 2002 and to analyze which measures to be taken in the physical social planning to decrease this everyday criminality there. The term everyday criminality is here to be understood as those categories of crime that appear most frequently in the records of reports to the police every year. Here two kinds of crime have been in focus, thefts from cars and office burglary.In fulfilling this aim two main questions have been answered. The first one is how the everyday criminality was distributed geographically in the town of Borlänge during the year 2002. The second one is which measures to be taken in the physical social planning to decrease this everyday criminality in the town of Borlänge.In order to answer the first question a spatial autocorrelation analysis, Local Moran LISA has been used. This method is based on the measurement Moran´s I and shows the spatial autocorrelation for every single location. To answer the second question three different theories of crime prevention through environmental design have been studied and applied in the analysis. These are Jane Jacobs’ ideas about ”the living city”, Oscar Newman´s ideas about ”defensible space” and Ronald V. Clarke´s theories about crime prevention.The major conclusions that can be drawn from this thesis are that the risk of being exposed to thefts from cars, during the analyzed time period, was highest in Centrum and Hagalund and their surroundings. The lowest risk of being exposed to this type of crime was found in Domnarvet and Islingby, during the year 2002. The highest risk of being a victim of the crime office burglary was found in Hagalund and its surroundings and in the single area of Kvarnsveden. The corresponding lowest risk was found in Lergärdet and its surroundings and in Norra Backa and Kupolen. The measures that should be taken in order to decrease these types of criminality can be divided into overall changes and place-specific changes. When it comes to the crime thefts from cars a more attractive central business district, a better view of parking lots from nearby buildings, dividing of larger parking lot zones into smaller ones, migration of hidden parking lots and stronger access control to parking lots where problems with this kind of crime have occurred have been suggested as overall changes. The corresponding place-specific changes are to remove vegetation that is blocking the view, better lighting and to put up signs with information about increased risk of exposure to crime at parking lots with the most problems. To decrease the amount of office burglaries overall changes as to create a better view of the area from nearby surroundings, move bigger office compartments or divide them into smaller units, rebuild characteristic buildings and increase security by strengthening the access control to offices with these kinds of problems could be useful. Finally there are possibilities to decrease office burglary by using place-specific measures as surveillance cameras combined with signs containing information about these, high fences and better lighting around the buildings where a higher risk of being exposed to this kind of criminality is present.

Train Dispatching: Heuristic Optimization

Train dispatchers faces lots of challenges due to conflicts which causes delays of trains as a result of solving possible dispatching problems the network faces. The major challenge is for the train dispatchers to make the right decision and have reliable, cost effective and much more faster approaches needed to solve dispatching problems. This thesis work provides detail information on the implementation of different heuristic algorithms for train dispatchers in solving train dispatching problems. The library data files used are in xml file format and deals with both single and double tracks between main stations. The main objective of this work is to build different heuristic algorithms to solve unexpected delays faced by train dispatchers and to help in making right decisions on steps to take to have reliable and cost effective solution to the problems. These heuristics algorithms proposed were able to help dispatchers in making right decisions when solving train dispatching problems.

Nytt fordon för transport av bränsleflis : Slutrapport (STEM-projekt 22127-1)

Högskolan Dalarna har i samarbete med Naturbränsle i Mellansverige AB genomfört studier på ett nytt fordon för transport av skogsflis. Fordonet är försett med egen lastningsutrustning (kran och skopa), vilket innebär att flisskördaren kan tippa flisen direkt på marken eller på en i förväg utlagd duk (minskar risken för föroreningar i samband med lastning). Studier har också genomförts på transport av flis med lastväxlarfordon och container (traditionell metod) för att jämförelser skall kunna göras mellan de olika fordonstyperna. Studierna har finansie¬rats via anslag från Statens Energimyndighet och via ”naturabidrag” från deltagande företag.Studierna visar att det nya transportfordonet är ett bättre alternativ än de traditionella last¬växlarfordonen på större objekt med långa transportavstånd. Dessutom pekar studien på att det är sannolikt är bättre även på små objekt under förutsättning att flisningskostnaden kan hållas på en rimlig nivå. Studierna visar också att det bör finnas en viss utvecklingspotential på det nya fordonet (teknik- och metodutveckling), varför det bedöms kunna konkurrera med lastväxlarfordonen även på andra typer av objekt.Jämfört med de traditionella lastväxlarfordonen har det nya fordonet bl.a. följande fördelar:•Transportarbetet blir lättare att planera i och med att beroendeförhållandet mellan in¬blandade maskiner och fordon för flisproduktion och transport upphör.••Risken för störningar i transportflödet minskar.•Miljövinsterna blir större jämfört med lastväxlarfordon som måste ställa ut tomma con¬tainrar innan flisningen kan påbörjas.•Det finns inget behov av lastmaskiner på terminalerna.•Flis kan mellanlagras i skogen.Till nackdelarna med det nya fordonet hör bl.a. följande:•Framkomligheten är något sämre än för lastväxlarfordon på mycket smala och kurviga skogsbilvägar.•Det finns en viss risk för att föroreningar följer med vid lastning av fordonet. Studies were carried out on a new vehicle for transport of fuel chips from the forest. The vehicle was equipped with a crane and a bucket meaning that the chipper may tip the fuel chips right on the ground or on a mat (vira from wood processing industry) to prevent from dirt such as sand and stones when loading. Studies were also carried out on traditional main hauling with transport bins. Transport speed was the same for all vehicles except for the new self-loader on forest roads with lower quality.The studies show that the new system probably is a better alternative on large sites with long transport distances and on sites with only little parking place for transport bins. It is also likely that the new vehicle may be used on very small sites if they are close to each other and if moving cost for the chipper is low.The studies show that the new vehicle has the following advantages:•Transport and other work may be planned in a better way leading to that stress de¬creases.•Dependence between chipper operators and truck drivers decreases.•The risk for disturbances in transport flow decreases.•Environment benefits compared to traditional system with higher traffic intensity (less exhaust gases and lower stress on roads and bridges).•No need for loading machines on terminals.•Easier to store fuel chips on landing.

Use of Photovoltaic on an E-bike? : A Feasibility Study

In recent years the number of bicycles with e-motors has been increased steadily. Within the pedelec – bikes where an e-motor supports the pedaling – a special group of transportation bikes has developed. These bikes have storage boxes in addition to the basic parts of a bike. Due to the space available on top of those boxes it is possible to install a PV system to generate electricity which could be used to recharge the battery of the pedelec. Such a system would lead to grid independent charging of the battery and to the possibility of an increased range of motor support. The feasibility of such a PV system is investigated for a three wheeled pedelec delivered by the company BABBOE NORDIC.The measured data of the electricity generation of this mobile system is compared to the possible electricity generation of a stationary system.To measure the consumption of the pedelec different tracks are covered, and the energy which is necessary to recharge the bike battery is measured using an energy logger. This recharge energy is used as an indirect measure of the electricity consumption. A PV prototype system is installed on the bike. It is a simple PV stand alone system consisting of PV panel, charge controller with MPP tracker and a solar battery. This system has the task to generate as much electricity as possible. The produced PV current and voltage aremeasured and documented using a data logger. Afterwards the average PV power is calculated. To compare the produced electricity of the on-bike system to that of a stationary system, the irradiance on the latter is measured simultaneously. Due to partial shadings on the on-bike PV panel, which are caused by the driver and some other bike parts, the average power output during riding the bike is very low. It is too low to support the motor directly. In case of a similar installation as the PV prototype system and the intention always to park the bike on a sunny spot an on-bike system could generate electricity to at least partly recharge a bike battery during one day. The stationary PV system using the same PV panel could have produced between 1.25 and 8.1 times as much as the on-bike PV system. Even though the investigation is done for a very specific case it can be concluded that anon-bike PV system, using similar components as in the investigation, is not feasible to recharge the battery of a pedelec in an appropriate manner. The biggest barrier is that partial shadings on the PV panel, which can be hardly avoided during operation and parking, result in a significant reduction of generated electricity. Also the installation of the on-bike PV system would lead to increased weight of the whole bike and the need for space which is reducing the storage capacity. To use solar energy for recharging a bike battery an indirect way is giving better results. In this case a stationary PV stand alone system is used which is located in a sunny spot without shadings and adjusted to use the maximum available solar energy. The battery of the bike is charged using the corresponding charger and an inverter which provides AC power using the captured solar energy.

Machine Learning Algorithms in Heavy Process Manufacturing

In a global economy, manufacturers mainly compete with cost efficiency of production, as the price of raw materials are similar worldwide. Heavy industry has two big issues to deal with. On the one hand there is lots of data which needs to be analyzed in an effective manner, and on the other hand making big improvements via investments in cooperate structure or new machinery is neither economically nor physically viable. Machine learning offers a promising way for manufacturers to address both these problems as they are in an excellent position to employ learning techniques with their massive resource of historical production data. However, choosing modelling a strategy in this setting is far from trivial and this is the objective of this article. The article investigates characteristics of the most popular classifiers used in industry today. Support Vector Machines, Multilayer Perceptron, Decision Trees, Random Forests, and the meta-algorithms Bagging and Boosting are mainly investigated in this work. Lessons from real-world implementations of these learners are also provided together with future directions when different learners are expected to perform well. The importance of feature selection and relevant selection methods in an industrial setting are further investigated. Performance metrics have also been discussed for the sake of completion.

Effects of computer reminders on complications of peripheral venous catheters and nurses' adherence to a guideline in paediatric care : a cluster randomised study

BACKGROUND: Reminder systems in electronic patient records (EPR) have proven to affect both health care professionals' behaviour and patient outcomes. The aim of this cluster randomised trial was to investigate the effects of implementing a clinical practice guideline (CPG) for peripheral venous catheters (PVCs) in paediatric care in the format of reminders integrated in the EPRs, on PVC-related complications, and on registered nurses' (RNs') self-reported adherence to the guideline. An additional aim was to study the relationship between contextual factors and the outcomes of the intervention. METHODS: The study involved 12 inpatient units at a paediatric university hospital. The reminders included choice of PVC, hygiene, maintenance, and daily inspection of PVC site. Primary outcome was documented signs and symptoms of PVC-related complications at removal, retrieved from the EPR. Secondary outcome was RNs' adherence to a PVC guideline, collected through a questionnaire that also included RNs' perceived work context, as measured by the Alberta Context Tool. Units were allocated into two strata, based on occurrence of PVCs. A blinded simple draw of lots from each stratum randomised six units to the control and intervention groups, respectively. Units were not blinded. The intervention group included 626 PVCs at baseline and 618 post-intervention and the control group 724 PVCs at baseline and 674 post-intervention. RNs included at baseline were 212 (65.4 %) and 208 (71.5 %) post-intervention. RESULTS: No significant effect was found for the computer reminders on PVC-related complications nor on RNs' adherence to the guideline recommendations. The complication rate at baseline and post-intervention was 40.6 % (95 % confidence interval (CI) 36.7-44.5) and 41.9 % (95 % CI 38.0-45.8), for the intervention group and 40.3 % (95 % CI 36.8-44.0) and 46.9 % (95 % CI 43.1-50.7) for the control. In general, RNs' self-rated work context varied from moderately low to moderately high, indicating that conditions for a successful implementation to occur were less optimal. CONCLUSIONS: The reminders might have benefitted from being accompanied by a tailored intervention that targeted specific barriers, such as the low frequency of recorded reasons for removal, the low adherence to daily inspection of PVC sites, and the lack of regular feedback to the RNs. TRIAL REGISTRATION: Current Controlled Trials ISRCTN44819426.