Paper dimensional stability in sheet-fed offset printing : Papperets dimensionsstabilitet i en arkoffsetpress

In offset printing, dampening solution is used to create a good balance in the process. If too much water is transferred to the paper, the sheet can change its size between the printing units, due to water absorption, and cause a problem with the colour register. This phenomenon is usually referred to as fanout. In this degree project, an investigation was made to see if the paper dimensions changed through its way in the sheet-fed printing process. The instrument Luchs Register Measuring Systems (Lynx) was used, and a method for measuring if the paper changed its dimensions with this instrument, was developed. Paper qualities with three different grammages were used, 90, 130 and 250 gsm. This investigation showed that all paper qualities changed their size with widening in the gripper edge in the range of 10 - 70 µm and in the trailing edge the increase was 10 - 130 µm. The elongations of the papers were in the range of 10- 300 µm. The papers with lowest grammage changed more than the heavier. To see if the print had been affected of the widening and elongation, print quality parameters like relative contrast, dot gain and mottle were correlated with the Lynx data from the sheets. The group of papers that gave correlations were in 130 gsm. The sheets had visual doubling and the combined standard deviation from the Lynx marks K3, K5 and K21 correlated with dot gain. When the variations increased so did the dot gain and this indicates that the doubling was due to the widening. There was also a correlation between the standard deviation from K3 and Mottle. The sheets widened with an average of 30 µm in the gripper edge and since there probably were doubling due to widening it also affected the Mottle values. What the widening depends on is hard to tell. Since widening was so small, it could be due to water absorption, papers being ironed out or maybe the sheets have been flattened out. It probably needs a more detailed investigation to find out what causes the widening. Further investigations about how print quality is affected by the register accuracy of a printing machine should include a print form with measuring areas close to the Lynx marks. The measuring areas should contain fine hairlines, negative text printed with at least two colours and some pictures to evaluate together with standard measuring should give a good knowledge about the subject.

Influence of hardwood, softwoodand fractionated pulp in a stratifiedthree-layered fine paper : Lövved, barrved och fraktionerad massa ochdess inverkan på ett treskiktat finpapper

Four different trials of stratified three-layered fine paper, of sulphate pulp, were performed to investigate if stratified fine fraction or fibres from birch can improve the properties of a paper compared to a reference sheet. All trials had five different scenarios and each scenario was calendered with different linear load. All sheets had a grammage of 80 g/m2.In the first trial, the paper contained birch, pine and filler of calciumcarbonate (marble), and was manufactured with the pilot paper machine XPM and the stratified headbox Formator at RCF (Stora Enso Research Center in Falun). The furnish consisted of 75% birch and 25% pine.The second trial contained coated sheets with paper from trial one as the base paper. The coating slip contained calciumcarbonate and clay and the amount was approximately 10-12 g/m2.The third trial, also with birch and pine but without filler, was performed at STFI (Skogsindustrins Tekniska Forskningsinstitut in Stockholm) with the laboratory scaled paper machine StratEx and the stratified headbox AQ-vanes. The furnish consisted of 75% birch and 25% pine, except for one scenario which contained of 75% pine and 25% birch.The last trial contained fractionated pulp of birch and pine and was performed at STFI. 50% was fine fraction and 50% was coarse fraction.This test does not show any clear benefits of making stratified sheets of birch and pine when it comes to properties such as bending stiffness, tensile index and surface smoothness. The retention can be improved with birch in the surface plies. It is possible that the formation can be improved with birch in the surface plies and pine in the middle ply. It is also possible that fine fraction in the surface plies and coarse fraction in the middle ply can improve both surface smoothness and bending stiffness. The results in this test are shown with confidence intervals which points out the difficulties of analysing sheets manufactured with a pilot paper machine or a laboratory scaled paper machine.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Populärmusik i TV-reklam : En kvalitativ undersökning av musiken som betydelsebärande teckensystem

This paper examines a popular music song (Heartbeats by Jose Gonzalez) as a sign system in television advertising. The study was conducted through qualitative questionnaires in connection to an audio-visual method of analysis called Masking. The method facilitates the analysis of isolated parts in the audio-visual spectrum by masking/hiding parts of the audio-visual totality.The survey had seven respondents where a hermeneutic epistemological approach was used. For the analysis Cooper's theory of brand identity (Practical and Symbolic Attitudes to Buying Brands) was used together with an interaction model for music in audio-visual advertising called "Modes of music-image interaction”. The results showed that the music was associated with values as genuine, honest, responsibility, purity, independence and innovation. The music's symbolic values helped to position the brand in a lifestyle context. The music also helped to express the target group’s identity and attitudes by being innovative and independent. It also enhanced the perception of the visual colour rendition in the film. In general the television advertisement perceived more positive and entertaining when the music was present. In other words the music's social and cultural position contributed to raise the film's credibility. A deeper social and cultural value was created in the movie through resonance between symbolic values of the music and symbolic values of the film.

Sustainability & Consumer behavior towards Sustainability in Norway and Sweden

AimSustainability has become an important factor to consider while buying goods and services. People are being more conscious toward environmental impacts of products and services. This attitude has motivated many businesses to develop their production in contact with sustainability. The aim of this paper is to investigate different consumer behaviors toward sustainability in general and in relation to vehicles in Norway and Sweden.ApproachThe project has been embarked by dividing it into two tasks.1. Analyzing past, present and future development, growth and importance of sustainability concept. Describe the role of Government authorities in Norway and Sweden to promote sustainable consumption.2. Investigating important factors of consumer behaviors which influence their buying decision toward sustainable products in general and in relation to sustainable vehicles. Highlight the role of vehicle manufacturing companies to promote sustainable consumption.MethodA research has been conducted in order to explore consumer behavior toward sustainability in Norway and Sweden. Research is based on Document study and primary research which include questionnaire survey with consumers and interviews with vehicle dealers. In addition an expert inquiry is conducted to light up consumer intensions in Norway and Sweden toward sustainability.ResultsThe result of investigation has been revealed in shape of analyses and conclusion at the end. A comparison has been made between primary research and secondary research and findings are overlapping. Sustainable vehicles are being more popular among consumers in Norway and Sweden. Consumption trends are changing over time and environmental friendly attitudes are more developing among Swedish consumers as compared to Norwegian.

"Selling/Buying"

The article belongs to the field of lexical semantics studies, associated with describing the Russian linguistic world-image. The work focuses on the universal situation of purchase and sale as reflected in the Russian language.

Decisions with Impact on Energy Reduction Opportunities : Swedish manufacturers and buyers of new single-family houses

This article discusses some of the complexities of human decision-making. It aims, in particular, at relating the nature of decision-making to the illusory dichotomies of change and stability, individual actions and cultural sharing. Serving as an illustration to the discussion of the article is ongoing fieldwork in contexts of buying, selling and constructing pre-fabricated detached houses in the central Sweden, and the very specific question of how decisions to install one kind of heating-system rather than another come about. A common reductionism is to narrow down the understanding of decisions about heating systems and energy consumption to conscious choices made by individual householders. I have asked myself whether, on the contrary, anyone actually makes such decisions at all. Perhaps some of these decisions are merely outcomes of interaction between different individuals with their respective responsibilities and focuses of interest.

The Concept of ’Selling/Buying’ in the Russian Linguistic Picture of the World : from standard to sub-standard

The thesis belongs to the field of lexical semantics studies, associated with describing the Russian linguistic world-image. The research focuses on the universal situation of purchase and sale as reflected in the Russian lexical standard and sub-standard. The work deals also with subjects related to the sphere of social linguistics: the social stratification of the language, the structure of sub-standard, etc. The thesis is a contribution to the description of the Russian linguistic world-image as well as to the further elaboration of the conceptional analysis method. The results are applicable in teaching Russian as a foreign language, particularly in lexis and Russian culture and mentality studies.

Forskningscirklar - en arena där lärares syn på vad deras arbete resulterar i kan utmanas. : Paper presented at NFPS:s conference in Copenhagen 7-9 March, 2003

Lärare kan i första hand antas bilda sig sin uppfattning om resultatet av sitt arbete genom vad de kan observera av det som sker med deras elever. Vad har då denna erfarenhetsbaserade kunskap för betydelse för hur de uppfattar sitt arbete? I Sverige har t ex forskningscirklar använts i skolan, där lärare arbetar tillsammans med forskare, för att bearbeta frågeställningar som lärare möter i sin vardag. Kan forskningscirklar då vara ett sätt att utmana lärares syn på vilka resultat som deras arbete leder till?Från dessa utgångspunkter förefaller det vara relevant att ställa frågan om dessa sk forskningscirklar också kan vara en mötesplats där lärares syn på vilka resultat som deras arbete leder till utmanas? Följande frågeställning formuleras:• På vilken utsträckning kan forskningscirklar fungera som ett sätt att öppna nya infallsvinklar på hur lärare ser på resultatet av sitt arbete?

Are schools able to bring sense into pupils' lives? - an experiment to use Antonovsky's concept sense of coherence from a school perspective. : Paper presented at the ENIRDEM conference in Kilkenny, Ireland 26th-29th September, 2002

Young people now spend a longer and longer period of their lives at school then ever before. Not always because that they want to, but because society has nothing else to offer. The situation in many schools may also, in different aspects, be seen as highly problematic. Andersson (2001) has, for example, found in a large longitudinal study - The Life Project – that schools seem to be adapted to the needs of only a minority of the students - around 30%. On the other hand school is badly adjusted to the requirements of another 30 %. This group of students often find school meaningless, uninteresting and boring. For these students school is mostly a waste of time. In such circumstances, it seems natural that society has a responsibility to offer young people a meaningful time at school, both here and now and to prepare them for a future live as adults, not only as a part of the work force.As a part of departure I briefly describe the model that Antonovsky has developed and try to use it in a school context instead. I have here, of course, no possibility to make a deeper analysis of a complex problem such as this.In Antonovsky’s spirit, using a salutogenic perspective, instead of asking ourselves why do pupils fail or perhaps also not like being at school we have to ask, instead: What it is that makes pupils successful? From this background the purpose of this paper is to discuss some aspects of how pupils may use different strategies to handle their school situation in a proper way.