Al-Mahdi - Gestalt och budskap : En litteraturstudie jämförande sudanesisk Mahdi och indisk Mahdi inom islam

Followers of three world religions, Judaism, Christianity and Islam are waiting for the Messiah. Muslims are even waiting for aspiritual leader al-Mahdi. Two different persons claimed the title of al-Mahdi, at the end of the nineteenth century. Theyappeared almost at the same time, at the totally different places of the earth, with a completely different message and underthe rule of the British colonial power. The aim of the study is to compare the both religious figures, Mirza Ghulam Ahmadfrom India and Muhammad Ahmad from Sudan regarding their different messages, to illustrate the social, political andreligious factors that lead to the entirely different profile and image of these two men and how their organizations havedeveloped after their death up till today. The result shows that the Sudanese Mahdi Muhammad Ahmad claimed hisMahdiship in the year 1881. He became a political leader in a time when Sudan was under the rule of a colonial power. Hetook advantage of the religion for personal purposes and tried to liberate his native country Sudan. The contemporaryMuslim clergy criticized him for his claim because the content of the Hadith traditions did not support his claim ofMahdiship. He maintained his sole right for the interpretation of religion and of the laws of Sharia. He made changes even inthe chief pillars of Islam by asserting that Jehad with sword was more imperative than the pilgrimage journey to Mecca. Heasserted that the Prophet Muhammad himself had entrusted him to launch the holy war against the non-believers. He hadimmense ambitions which were never fulfilled since he suddenly died four years after his claim for Mahdiship, in June 1885.This day his followers are organized as a political party in Sudan with a modest roll in the Sudanese politics. The IndianMahdi Mirza Ghulam Ahmad claimed in 1889 to be Mahdi, Mujaddid, Muhaddas, Messiah and a Prophet at a time of socialand political peace, though Islam as a religion was firmly pushed by the Hindu and Christian missionaries. He had no politicalambitions at all and was utterly loyal to the British colonial power. His mission was to crush the Cross and to demonstrateIslam’s excellence over all the religions of the world through overwhelming arguments. He proclaimed that Jesus was humanand a Prophet and not the son of God. Jesus survived from the cross and died a natural death after he had lived for manyyears. Ahmad claimed that God had commanded him to put stop to the religious wars. The contemporary Muslim clergyblamed him for being an imposter, melancholic and hypochondriac who had self invented the divine revelations. He died year1908, nineteen years after his claim and the communion he found is established today in more than hundred countries of theworld. Reasons for the breakdown of mission of the Sudanese Mahdi were that his objectives were political and he challengedthe colonial power with the sword. Another decisive factor was his sudden death merely four years after the beginning of hismission. Reasons for the success of Indian Mahdi were that his objectives were purely religious and he was wholly loyal to theforeign government. He survived nineteen years after the beginning of his mission which made it possible for him to create acommunion based on solid grounds. His followers continued on the same path and never engaged in local politics where everthey lived. For further studies it will be of great interest to study the life of Mirza Ghulam Ahmad and objectively examine thearguments he presented in support of his divine appointment. Furthermore it is enriching to study the organization andactivities of the Ahmadiyya Muslim community to explore if they are in accordance with the basic principles of Ahmad.

A GUI for online presentation of steel and steelmaking ladle temperature data and simulation.

Continuous casting is a casting process that produces steel slabs in a continuous manner with steel being poured at the top of the caster and a steel strand emerging from the mould below. Molten steel is transferred from the AOD converter to the caster using a ladle. The ladle is designed to be strong and insulated. Complete insulation is never achieved. Some of the heat is lost to the refractories by convection and conduction. Heat losses by radiation also occur. It is important to know the temperature of the melt during the process. For this reason, an online model was previously developed to simulate the steel and ladle wall temperatures during the ladle cycle. The model was developed as an ODE based model using grey box modeling technique. The model’s performance was acceptable and needed to be presented in a user friendly way. The aim of this thesis work was basically to design a GUI that presents steel and ladle wall temperatures calculated by the model and also allow the user to make adjustments to the model. This thesis work also discusses the sensitivity analysis of different parameters involved and their effects on different temperature estimations.

Production and Delivery (Optimization of production system and reliability)

This thesis is done to solve two issues for Sayid Paper Mill Ltd Pakistan. Section one deals with a practical problem arise in SPM that is cutting a given set of raw paper rolls of known length and width, and a set of product paper rolls of known length (equal to the length of raw paper rolls) and width, practical cutting constraints on a single cutting machine, according to demand orders for all customers. To solve this problem requires to determine an optimal cutting schedule to maximize the overall cutting process profitability while satisfying all demands and cutting constraints. The aim of this part of thesis is to develop a mathematical model which solves this problem.Second section deals with a problem of delivering final product from warehouse to different destinations by finding shortest paths. It is an operational routing problem to decide the daily routes for sending trucks to different destination to deliver their final product. This industrial problem is difficult and includes aspect such as delivery to a single destination and multiple destinations with limited resources. The aim of this part of thesis is to develop a process which helps finding shortest path.

Patientens kunskap om parodontit före och efter icke kirurgisk parodontal behandling utförd av tandhygienist : En kvantitativ studie

Parodontit är en kronisk inflammatorisk sjukdom, som orsakas av patogena bakterier som fäster på tändernas ytor, där de bildar plack. Sjukdomen kan förebyggas genom god munhygien. Syftet med studien var att beskriva och jämföra parodontit relateradkunskap och dess relation till munhygiensvanor hos patienter före och 1-år efter icke kirurgisk parodontal behandling utförd av tandhygienist samt jämföra om det föreligger någon skillnad i kunskap efter behandling mellan två olika munhälsoundervisningsprogram. Ett ytterligare syfte var att beskriva om det föreligger någon skillnad i kunskap om parodontit med avseende på ålder, kön och utbildningsnivå. Studien var en beskrivande, jämförande studie med kvantitativ ansats och en del av en experimentell tvågruppsstudie.Urvalet bestod av 113 individer, 60 kvinnor och 53 män, i åldern 20-65 år som var remitteras till en specialistklinik i parodontologi. Av de 113 studiedeltagarna randomiserades 57 personer till ett individuell skräddarsydd munhälsoundervisningsprogram och 56 personer till ett standardiserat munhälsoundervisningsprogram. Ett frågeformulär med 11 påståenden gällande kunskap om parodontit och ett påstående om tandborstfrekvens samt ett påstående om approximalrengörning användes.Resultatet visade att patienterna hade mer kunskap efter icke kirurgisk parodontal behandling, men det fanns ingen skillnad mellan undervisningsprogrammen. Inget samband påvisades mellan kunskap om parodontit och utbildningsnivå, kön och ålder. Studien visar att både individuellt skräddarsydd munhälsoundervisning och standard munhälsoundervisning ledar till en ökad kunskap om parodontit mellan deltagarna.

INVENTORY CONTROL SYSTEM : Optimization of production system and reliability

The main idea of this research to solve the problem of inventory management for the paper industry SPM PVT limited. The aim of this research was to find a methodology by which the inventory of raw material could be kept at minimum level by means of buffer stock level.The main objective then lies in finding the minimum level of buffer stock according to daily consumption of raw material, finding the Economic Order Quantity (EOQ) reorders point and how much order will be placed in a year to control the shortage of raw material.In this project, we discuss continuous review model (Deterministic EOQ models) that includes the probabilistic demand directly in the formulation. According to the formula, we see the reorder point and the order up to model. The problem was tackled mathematically as well as simulation modeling was used where mathematically tractable solution was not possible.The simulation modeling was done by Awesim software for developing the simulation network. This simulation network has the ability to predict the buffer stock level based on variable consumption of raw material and lead-time. The data collection for this simulation network is taken from the industrial engineering personnel and the departmental studies of the concerned factory. At the end, we find the optimum level of order quantity, reorder point and order days.

Use Multilevel Graph Partitioning Scheme to solve traveling salesman problem

The traveling salesman problem is although looking very simple problem but it is an important combinatorial problem. In this thesis I have tried to find the shortest distance tour in which each city is visited exactly one time and return to the starting city. I have tried to solve traveling salesman problem using multilevel graph partitioning approach.Although traveling salesman problem itself very difficult as this problem is belong to the NP-Complete problems but I have tried my best to solve this problem using multilevel graph partitioning it also belong to the NP-Complete problems. I have solved this thesis by using the k-mean partitioning algorithm which divides the problem into multiple partitions and solving each partition separately and its solution is used to improve the overall tour by applying Lin Kernighan algorithm on it. Through all this I got optimal solution which proofs that solving traveling salesman problem through graph partition scheme is good for this NP-Problem and through this we can solved this intractable problem within few minutes.Keywords: Graph Partitioning Scheme, Traveling Salesman Problem.

Sustainability & Consumer behavior towards Sustainability in Norway and Sweden

AimSustainability has become an important factor to consider while buying goods and services. People are being more conscious toward environmental impacts of products and services. This attitude has motivated many businesses to develop their production in contact with sustainability. The aim of this paper is to investigate different consumer behaviors toward sustainability in general and in relation to vehicles in Norway and Sweden.ApproachThe project has been embarked by dividing it into two tasks.1. Analyzing past, present and future development, growth and importance of sustainability concept. Describe the role of Government authorities in Norway and Sweden to promote sustainable consumption.2. Investigating important factors of consumer behaviors which influence their buying decision toward sustainable products in general and in relation to sustainable vehicles. Highlight the role of vehicle manufacturing companies to promote sustainable consumption.MethodA research has been conducted in order to explore consumer behavior toward sustainability in Norway and Sweden. Research is based on Document study and primary research which include questionnaire survey with consumers and interviews with vehicle dealers. In addition an expert inquiry is conducted to light up consumer intensions in Norway and Sweden toward sustainability.ResultsThe result of investigation has been revealed in shape of analyses and conclusion at the end. A comparison has been made between primary research and secondary research and findings are overlapping. Sustainable vehicles are being more popular among consumers in Norway and Sweden. Consumption trends are changing over time and environmental friendly attitudes are more developing among Swedish consumers as compared to Norwegian.

Brand Awareness among Customers : A case study of ICA-Kvantum

This research paper has been prepared by Bachelor students from Dalarna University in Borlänge. The project is centered on a case study of ICA – Kvantum and its brand awareness among customers. The purpose of this study is to find out that which measures can help ICA-Kvantum to create brand awareness among its current and potential customers by looking in to the importance of information of its offerings and use of effective communication tools to convey this information. Further, to recommend them what they need to do, to increase brand awareness among their customers with the help of managerial implications. The research question was formulated as what actions could be seen effective for ICA-Kvantum to maintain or improve brand awareness among its current and potential customers.The project was created with the help of theoretical concepts of brand awareness, brand loyalty, perceived quality, consumer decision model, integrated marketing communication approach and strategic planning process. These theories were applied in this thesis in order to find out the most effective communication measures to maintain or improve brand awareness among current and potential customers of ICA-Kvantum.The primary and secondary data was collected. Primary data was gathered through the survey among ICA-Kvantum customers in the front of the store in Borlänge. The personal interview with manager was conducted in the office of ICA-Kvantum store located in Borlänge. Secondary data was gathered from textbooks, academic journals, theses and websites.The empirical findings have been presented in detail and then analyzed with the help of theoretical concepts. The analysis and further results from survey and interview focused on importance of information, marketing communication tools, brand awareness and loyalty, perceived quality and implementation of strategic planning process. Moreover, the main weaknesses and strengths of ICA-Kvantun have been evaluated. The conclusion including short summary of analysis and its results have been provided at the end. Each weakness of issues related to brand awareness i.e. importance of information, effectiveness of marketing communication tools and strengths and weaknesses of ICA-Kvantum discussed in the paper, has been pointed out along with solutions and managerial implications.

Colorizing Grey Scale Images

The purpose of this thesis is to develop a working methodology to color a grey scale image. This thesis is based on approach of using a colored reference image. Coloring grey scale images has no exact solution till date and all available methods are based on approximation. This technique of using a color reference image for approximating color information in grey scale image is among most modern techniques.Method developed here in this paper is better than existing methods of approximation of color information addition in grey scale images in brightness, sharpness, color shade gradients and distribution of colors over objects.Color and grey scale images are analyzed for statistical and textural features. This analysis is done only on basis of luminance value in images. These features are then segmented and segments of color and grey scale images are mapped on basis of distances of segments from origin. Then chromatic values are transferred between these matched segments from color image to grey scale image.Technique proposed in this paper uses better mechanism of mapping clusters and mapping colors between segments, resulting in notable improvement in existing techniques in this category.

Identification of cause of impairment in spiral drawings, using non-stationary feature extraction approach

Parkinson’s disease is a clinical syndrome manifesting with slowness and instability. As it is a progressive disease with varying symptoms, repeated assessments are necessary to determine the outcome of treatment changes in the patient. In the recent past, a computer-based method was developed to rate impairment in spiral drawings. The downside of this method is that it cannot separate the bradykinetic and dyskinetic spiral drawings. This work intends to construct the computer method which can overcome this weakness by using the Hilbert-Huang Transform (HHT) of tangential velocity. The work is done under supervised learning, so a target class is used which is acquired from a neurologist using a web interface. After reducing the dimension of HHT features by using PCA, classification is performed. C4.5 classifier is used to perform the classification. Results of the classification are close to random guessing which shows that the computer method is unsuccessful in assessing the cause of drawing impairment in spirals when evaluated against human ratings. One promising reason is that there is no difference between the two classes of spiral drawings. Displaying patients self ratings along with the spirals in the web application is another possible reason for this, as the neurologist may have relied too much on this in his own ratings.

Hand Gesture Detection & Recognition System

The project introduces an application using computer vision for Hand gesture recognition. A camera records a live video stream, from which a snapshot is taken with the help of interface. The system is trained for each type of count hand gestures (one, two, three, four, and five) at least once. After that a test gesture is given to it and the system tries to recognize it.A research was carried out on a number of algorithms that could best differentiate a hand gesture. It was found that the diagonal sum algorithm gave the highest accuracy rate. In the preprocessing phase, a self-developed algorithm removes the background of each training gesture. After that the image is converted into a binary image and the sums of all diagonal elements of the picture are taken. This sum helps us in differentiating and classifying different hand gestures.Previous systems have used data gloves or markers for input in the system. I have no such constraints for using the system. The user can give hand gestures in view of the camera naturally. A completely robust hand gesture recognition system is still under heavy research and development; the implemented system serves as an extendible foundation for future work.

Do crude oil price changes affect economic growth of India, Pakistan and Bangladesh? : A multivariate time series analysis

This paper analyzes empirically the effect of crude oil price change on the economic growth of Indian-Subcontinent (India, Pakistan and Bangladesh). We use a multivariate Vector Autoregressive analysis followed by Wald Granger causality test and Impulse Response Function (IRF). Wald Granger causality test results show that only India’s economic growth is significantly affected when crude oil price decreases. Impact of crude oil price increase is insignificantly negative for all three countries during first year. In second year, impact is negative but smaller than first year for India, negative but larger for Bangladesh and positive for Pakistan.

An analysis of linkage between foreign direct investment and GDP per Capita in Pakistan : A time series analysis

This study aims to investigate the relation between foreign direct investment (FDI) and per capita gross domestic product (GDP) in Pakistan. The study is based on a basic Cobb-Douglas production function. Population over age 15 to 64 is used as a proxy for labor in the investigation. The other variables used are gross capital formation, technological gap and a dummy variable measuring among other things political stability. We find positive correlation between GDP per capita in Pakistan and two variables, FDI and population over age 15 to 64. The GDP gap (gap between GDP of USA and GDP of Pakistan) is negatively correlated with GDP per capita as expected. Political instability, economic crisis, wars and polarization in the society have no significant impact on GDP per capita in the long run.