Colorizing Grey Scale Images

The purpose of this thesis is to develop a working methodology to color a grey scale image. This thesis is based on approach of using a colored reference image. Coloring grey scale images has no exact solution till date and all available methods are based on approximation. This technique of using a color reference image for approximating color information in grey scale image is among most modern techniques.Method developed here in this paper is better than existing methods of approximation of color information addition in grey scale images in brightness, sharpness, color shade gradients and distribution of colors over objects.Color and grey scale images are analyzed for statistical and textural features. This analysis is done only on basis of luminance value in images. These features are then segmented and segments of color and grey scale images are mapped on basis of distances of segments from origin. Then chromatic values are transferred between these matched segments from color image to grey scale image.Technique proposed in this paper uses better mechanism of mapping clusters and mapping colors between segments, resulting in notable improvement in existing techniques in this category.

Development of a ESES Solar Thermal Lab on Full Scale System

The main aim of this project is to develop an ESES lab on a full scale system. The solar combisystem used is available most of the time and is only used twice a year to carry out some technical courses. At the moment, there are no other laboratories about combisystems. The experiments were designed in a way to use the system to the most in order to help the students apply the theoretical knowledge in the solar thermal course as well as make them more familiar with solar systems components. The method adopted to reach this aim is to carry out several test sequences on the system, in order to help formulating at the end some educating experiments. A few tests were carried out at the beginning of the project just for the sake of understanding the system and figuring out if any additional measuring equipment is required. The level of these tests sequences was varying from a simple energy draw off or collector loop controller respond tests to more complicated tests, such as the use of the ‘collector’ heater to simulate the solar collector effect on the system. The tests results were compared and verified with the theoretical data wherever relevant. The results of the experiment about the use of the ‘collector’ heater instead of the collector were positively acceptable. Finally, the Lab guide was developed based on the results of these experiments and also the experience gotten while conducting them. The lab work covers the theories related to solar systems in general and combisystems in particular. 

The most severe parkinsonian patients are most improved with duodenal levodopa infusion

Objectives:To find variables correlated to improvement with intraduodenal levodopa/carbidopa infusion (Duodopa) in order to identify potential candidates for this treatment. Two clinical studies comparing Duodopa with oral treatments in patients with advanced Parkinson’s disease have shown significant improvement in percent on-time on a global treatment response scale (TRS) based on hourly and half-hourly clinical ratings and in median UPDRS scores.Methods:Data from study 1 comparing infusion with Sinemet CR (12 patients, Nyholm et al, Clin Neuropharmacol 2003; 26(3): 156-163) and study 2 comparing infusion with individually optimised conventional combination therapies (18 patients, Nyholm et al, Neurology, in press) were used. Measures of severity were defined as total UPDRS score and scores for sections II and III, percent functional on-time and mean squared error of ratings on the TRS and as mean of diary questions about mobility and satisfaction (only study 2). Absolute improvement was defined as difference in severity, and relative improvement was defined as percent absolute improvement/severity on oral treatment. Pearson correlation coefficients between measures of improvement and other variables were calculated.Results:Correlations (r2>0.28, p<0.05) between severity during oral treatment and absolute improvement on infusion were found for: Total UPDRS, UPDRS III and TRS ratings (studies 1 and 2) and for diary question 1 (mobility) and UPDRS II (study 2). Correlation to relative improvement was found for total UPDRS (study 2, r2=0.47). Figure 1 illustrates absolute improvement in total UPDRS vs. total UPDRS during oral treatment (study 2).Conclusion:Correlating different measures of severity and improvement revealed that patients with more severe symptoms were most improved and that the relation between severity and improvement was linear within the studied groups. The result, which was reproducible between two clinical studies, could be useful when deciding candidates for the treatment.

Acupuncture with manual and electrical stimulation for labour pain : a longitudinal randomised controlled trial

Background: Acupuncture is commonly used to reduce pain during labour despite contradictory results. The aim of this study is to evaluate the effectiveness of acupuncture with manual stimulation and acupuncture with combined manual and electrical stimulation (electro-acupuncture) compared with standard care in reducing labour pain. Our hypothesis was that both acupuncture stimulation techniques were more effective than standard care, and that electro-acupuncture was most effective.  Methods: A longitudinal randomised controlled trial. The recruitment of participants took place at the admission to the labour ward between November 2008 and October 2011 at two Swedish hospitals. 303 nulliparous women with normal pregnancies were randomised to: 40 minutes of manual acupuncture (MA), electro-acupuncture (EA), or standard care without acupuncture (SC). Primary outcome: labour pain, assessed by Visual Analogue Scale (VAS). Secondary outcomes: relaxation, use of obstetric pain relief during labour and post-partum assessments of labour pain. The sample size calculation was based on the primary outcome and a difference of 15 mm on VAS was regarded as clinically relevant, this gave 101 in each group, including a total of 303 women.  Results: Mean estimated pain scores on VAS (SC: 69.0, MA: 66.4 and EA: 68.5), adjusted for: treatment, age, education, and time from baseline, with no interactions did not differ between the groups (SC vs MA: mean difference 2.6, 95% confidence interval [CI] -1.7-6.9 and SC vs EA: mean difference 0.6 [95% CI] -3.6-4.8). Fewer number of women in the EA group used epidural analgesia (46%) than women in the MA group (61%) and SC group (70%) (EA vs SC: odds ratio [OR] 0.35; [95% CI] 0.19-0.67).  Conclusions: Acupuncture does not reduce women's experience of labour pain, neither with manual stimulation nor with combined manual and electrical stimulation. However, fewer women in the EA group used epidural analgesia thus indicating that the effect of acupuncture with electrical stimulation may be underestimated. These findings were obtained in a context with free access to other forms of pain relief.

Photovoltaic System Design for a Contaminated Area in Falun – Comparison of South and East- West Layout

In this thesis the solar part of a large grid-connected photovoltaic system design has been done. The main purpose was to size and optimize the system and to present figures helping to evaluate the prospective project rationality, which can potentially be constructed on a contaminated area in Falun. The methodology consisted in PV market study and component selection, site analysis and defining suitable area for solar installation; and system configuration optimization based on PVsyst simulations and Levelized Cost of Energy calculations. The procedure was mainly divided on two parts, preliminary and detailed sizing. In the first part the objective was complex, which included the investigation of the most profitable component combination and system optimization due to tilt and row distance. It was done by simulating systems with different components and orientations, which were sized for the same 100kW inverter in order to make a fair comparison. For each simulated result a simplified LCOE calculation procedure was applied. The main results of this part show that with the price of 0.43 €/Wp thin-film modules were the most cost effective solution for the case with a great advantage over crystalline type in terms of financial attractiveness. From the results of the preliminary study it was possible to select the optimal system configuration, which was used in the detailed sizing as a starting point. In this part the PVsyst simulations were run, which included full scale system design considering near shadings created by factory buildings. Additionally, more complex procedure of LCOE calculation has been used here considered insurances, maintenance, time value of money and possible cost reduction due to the system size. Two system options were proposed in final results; both cover the same area of 66000 m2. The first one represents an ordinary South faced design with 1.1 MW nominal power, which was optimized for the highest performance. According to PVsyst simulations, this system should produce 1108 MWh/year with the initial investment of 835,000 € and 0.056 €/kWh LCOE. The second option has an alternative East-West orientation, which allows to cover 80% of occupied ground and consequently have 6.6 MW PV nominal power. The system produces 5388 MWh/year costs about 4500,000 € and delivers electricity with the same price of 0.056 €/kWh. Even though the EW solution has 20% lower specific energy production, it benefits mainly from lower relative costs for inverters, mounting and annual maintenance expenses. After analyzing the performance results, among the two alternatives none of the systems showed a clear superiority so there was no optimal system proposed. Both, South and East-West solutions have own advantages and disadvantages in terms of energy production profile, configuration, installation and maintenance. Furthermore, the uncertainty due to cost figures assumptions restricted the results veracity.

Children's Vocabulary Development : The role of parental input, vocabulary composition and early communicative skills

The aim of this thesis is to examine the early vocabulary development of a sample of Swedish children in relation to parental input and early communicative skills. Three studies are situated in an overall description of early language development in children. The data analyzed in the thesis was collected within a larger project at Stockholm University (SPRINT- “Effects of enhanced parental input on young children’s vocabulary development and subsequent literacy development” [VR 2008-5094]). Data analysis was based on parental report via SECDI, the Swedish version of the MacArthur-Bates Communicative Development Inventories, and audio recordings. One study examined parental verbal interaction characteristics in three groups of children with varying vocabulary size at 18 months. The stability of vocabulary development at 18 and 24 months was investigated in a larger study, with focus on children’s vocabulary composition and grammatical abilities. The third study examined interrelations among early gestures, receptive and productive vocabulary, and grammar measured with M3L, i.e. three longest utterances, from 12 to 30 months. Overall results of the thesis highlight the importance of early language development. Variability in different characteristics in parental input is associated with variability in child vocabulary size. Children with large early vocabularies exhibit the most stability in vocabulary composition and the earliest grammatical development. Children’s vocabulary composition may reflect individual stylistic variation. Use of early gestures is associated differentially with receptive and productive vocabulary. Results of the thesis have implications for parents, child- and healthcare personnel, as well as researchers and educational practitioners. The results underscore the importance of high quality in adult-child interaction, with rich input fine-tuned to children’s developmental levels and age, together with high awareness of early language development.

High female mortality resulting in herd collapse in free-ranging domesticated reindeer (Rangifer tarandus tarandus) in Sweden

Reindeer herding in Sweden is a form of pastoralism practised by the indigenous Sami population. The economy is mainly based on meat production. Herd size is generally regulated by harvest in order not to overuse grazing ranges and keep a productive herd. Nonetheless, herd growth and room for harvest is currently small in many areas. Negative herd growth and low harvest rate were observed in one of two herds in a reindeer herding community in Central Sweden. The herds (A and B) used the same ranges from April until the autumn gathering in October-December, but were separated on different ranges over winter. Analyses of capture-recapture for 723 adult female reindeer over five years (2007-2012) revealed high annual losses (7.1% and 18.4%, for herd A and B respectively). A continuing decline in the total reindeer number in herd B demonstrated an inability to maintain the herd size in spite of a very small harvest. An estimated breakpoint for when herd size cannot be kept stable confirmed that the observed female mortality rate in herd B represented a state of herd collapse. Lower calving success in herd B compared to A indicated differences in winter foraging conditions. However, we found only minor differences in animal body condition between the herds in autumn. We found no evidence that a lower autumn body mass generally increased the risk for a female of dying from one autumn to the next. We conclude that the prime driver of the on-going collapse of herd B is not high animal density or poor body condition. Accidents or disease seem unlikely as major causes of mortality. Predation, primarily by lynx and wolverine, appears to be the most plausible reason for the high female mortality and state of collapse in the studied reindeer herding community.