Important Parameters in Designing and Presenting Exhibits and Planetarium Programs in Science Centers : A Visitor-Based Framework

This dissertation proposes an initial framework for designing and presenting exhibits in science centers and to recommend methods for improving the educational role of planetariums in science centers.

MODELLING AND FORECASTING INFLATION RATES IN GHANA: AN APPLICATION OF SARIMA MODELS

Ghana faces a macroeconomic problem of inflation for a long period of time. The problem in somehow slows the economic growth in this country. As we all know, inflation is one of the major economic challenges facing most countries in the world especially those in African including Ghana. Therefore, forecasting inflation rates in Ghana becomes very important for its government to design economic strategies or effective monetary policies to combat any unexpected high inflation in this country. This paper studies seasonal autoregressive integrated moving average model to forecast inflation rates in Ghana. Using monthly inflation data from July 1991 to December 2009, we find that ARIMA (1,1,1)(0,0,1)12 can represent the data behavior of inflation rate in Ghana well. Based on the selected model, we forecast seven (7) months inflation rates of Ghana outside the sample period (i.e. from January 2010 to July 2010). The observed inflation rate from January to April which was published by Ghana Statistical Service Department fall within the 95% confidence interval obtained from the designed model. The forecasted results show a decreasing pattern and a turning point of Ghana inflation in the month of July.

TCA Evaluation : Lab Measurements, Modelling and System Simulations

The study reported here is part of a large project for evaluation of the Thermo-Chemical Accumulator (TCA), a technology under development by the Swedish company ClimateWell AB. The studies concentrate on the use of the technology for comfort cooling. This report concentrates on measurements in the laboratory, modelling and system simulation. The TCA is a three-phase absorption heat pump that stores energy in the form of crystallised salt, in this case Lithium Chloride (LiCl) with water being the other substance. The process requires vacuum conditions as with standard absorption chillers using LiBr/water. Measurements were carried out in the laboratories at the Solar Energy Research Center SERC, at Högskolan Dalarna as well as at ClimateWell AB. The measurements at SERC were performed on a prototype version 7:1 and showed that this prototype had several problems resulting in poor and unreliable performance. The main results were that: there was significant corrosion leading to non-condensable gases that in turn caused very poor performance; unwanted crystallisation caused blockages as well as inconsistent behaviour; poor wetting of the heat exchangers resulted in relatively high temperature drops there. A measured thermal COP for cooling of 0.46 was found, which is significantly lower than the theoretical value. These findings resulted in a thorough redesign for the new prototype, called ClimateWell 10 (CW10), which was tested briefly by the authors at ClimateWell. The data collected here was not large, but enough to show that the machine worked consistently with no noticeable vacuum problems. It was also sufficient for identifying the main parameters in a simulation model developed for the TRNSYS simulation environment, but not enough to verify the model properly. This model was shown to be able to simulate the dynamic as well as static performance of the CW10, and was then used in a series of system simulations. A single system model was developed as the basis of the system simulations, consisting of a CW10 machine, 30 m2 flat plate solar collectors with backup boiler and an office with a design cooling load in Stockholm of 50 W/m2, resulting in a 7.5 kW design load for the 150 m2 floor area. Two base cases were defined based on this: one for Stockholm using a dry cooler with design cooling rate of 30 kW; one for Madrid with a cooling tower with design cooling rate of 34 kW. A number of parametric studies were performed based on these two base cases. These showed that the temperature lift is a limiting factor for cooling for higher ambient temperatures and for charging with fixed temperature source such as district heating. The simulated evacuated tube collector performs only marginally better than a good flat plate collector if considering the gross area, the margin being greater for larger solar fractions. For 30 m2 collector a solar faction of 49% and 67% were achieved for the Stockholm and Madrid base cases respectively. The average annual efficiency of the collector in Stockholm (12%) was much lower than that in Madrid (19%). The thermal COP was simulated to be approximately 0.70, but has not been possible to verify with measured data. The annual electrical COP was shown to be very dependent on the cooling load as a large proportion of electrical use is for components that are permanently on. For the cooling loads studied, the annual electrical COP ranged from 2.2 for a 2000 kWh cooling load to 18.0 for a 21000 kWh cooling load. There is however a potential to reduce the electricity consumption in the machine, which would improve these figures significantly. It was shown that a cooling tower is necessary for the Madrid climate, whereas a dry cooler is sufficient for Stockholm although a cooling tower does improve performance. The simulation study was very shallow and has shown a number of areas that are important to study in more depth. One such area is advanced control strategy, which is necessary to mitigate the weakness of the technology (low temperature lift for cooling) and to optimally use its strength (storage).

The Survivability of Swedish Emergency Management Related Research Centers and Academic Programs : A Preliminary Sociology of Science Analysis

The Survivability of Swedish Emergency Management Related Research Centers and Academic Programs: A Preliminary Sociology of Science Analysis Despite being a relatively safe nation, Sweden has four different universities supporting four emergency management research centers and an equal and growing number of academic programs. In this paper, I discuss how these centers and programs survive within the current organizational environment. The sociology of science or the sociology of scientific knowledge perspectives should provide a theoretical guide. Yet, scholars of these perspectives have produced no research on these related topics. Thus, the population ecology model and the notion of organizational niche provide my theoretical foundation. My data come from 26 interviews from those four institutions, the gathering of documents, and observations. I found that each institution has found its own niche with little or no competition – with one exception. Three of the universities do have an international focus. Yet, their foci have minimal overlap. Finally, I suggest that key aspects of Swedish culture, including safety, and a need aid to the poor, help explain the extensive funding these centers and programs receive to survive. 

Environmental Objectives, Cost Efficiency, and Multivariate Stochastic Control

This paper is concerned with the cost efficiency in achieving the Swedish national air quality objectives under uncertainty. To realize an ecologically sustainable society, the parliament has approved a set of interim and long-term pollution reduction targets. However, there are considerable quantification uncertainties on the effectiveness of the proposed pollution reduction measures. In this paper, we develop a multivariate stochastic control framework to deal with the cost efficiency problem with multiple pollutants. Based on the cost and technological data collected by several national authorities, we explore the implications of alternative probabilistic constraints. It is found that a composite probabilistic constraint induces considerably lower abatement cost than separable probabilistic restrictions. The trend is reinforced by the presence of positive correlations between reductions in the multiple pollutants.

Literacy Practices in and out of School in Karagwe : The case of primary school literacy education in rural Tanzania

This study has investigated the question of relation between literacy practices in and out of school in rural Tanzania. By using the perspective of linguistic anthropology, literacy practices in five villages in Karagwe district in the northwest of Tanzania have been analysed. The outcome may be used as a basis for educational planning and literacy programs. The analysis has revealed an intimate relation between language, literacy and power. In Karagwe, traditional élites have drawn on literacy to construct and reconstruct their authority, while new élites, such as individual women and some young people have been able to use literacy as one tool to get access to power. The study has also revealed a high level of bilingualism and a high emphasis on education in the area, which prove a potential for future education in the area. At the same time discontinuity in language use, mainly caused by stigmatisation of what is perceived as local and traditional, such as the mother-tongue of the majority of the children, and the high status accrued to all that is perceived as Western, has turned out to constitute a great obstacle for pupils’ learning. The use of ethnographic perspectives has enabled comparisons between interactional patterns in schools and outside school. This has revealed communicative patterns in school that hinder pupils’ learning, while the same patterns in other discourses reinforce learning. By using ethnography, relations between explicit and implicit language ideologies and their impact in educational contexts may be revealed. This knowledge may then be used to make educational plans and literacy programmes more relevant and efficient, not only in poor post-colonial settings such as Tanzania, but also elsewhere, such as in Western settings.