Real time video segmentation for recognising paint marks on bad wooden railway sleepers

Wooden railway sleeper inspections in Sweden are currently performed manually by a human operator; such inspections are based on visual analysis. Machine vision based approach has been done to emulate the visual abilities of human operator to enable automation of the process. Through this process bad sleepers are identified, and a spot is marked on it with specific color (blue in the current case) on the rail so that the maintenance operators are able to identify the spot and replace the sleeper. The motive of this thesis is to help the operators to identify those sleepers which are marked by color (spots), using an “Intelligent Vehicle” which is capable of running on the track. Capturing video while running on the track and segmenting the object of interest (spot) through this vehicle; we can automate this work and minimize the human intuitions. The video acquisition process depends on camera position and source light to obtain fine brightness in acquisition, we have tested 4 different types of combinations (camera position and source light) here to record the video and test the validity of proposed method. A sequence of real time rail frames are extracted from these videos and further processing (depending upon the data acquisition process) is done to identify the spots. After identification of spot each frame is divided in to 9 regions to know the particular region where the spot lies to avoid overlapping with noise, and so on. The proposed method will generate the information regarding in which region the spot lies, based on nine regions in each frame. From the generated results we have made some classification regarding data collection techniques, efficiency, time and speed. In this report, extensive experiments using image sequences from particular camera are reported and the experiments were done using intelligent vehicle as well as test vehicle and the results shows that we have achieved 95% success in identifying the spots when we use video as it is, in other method were we can skip some frames in pre-processing to increase the speed of video but the segmentation results we reduced to 85% and the time was very less compared to previous one. This shows the validity of proposed method in identification of spots lying on wooden railway sleepers where we can compromise between time and efficiency to get the desired result.

Paper dimensional stability in sheet-fed offset printing : Papperets dimensionsstabilitet i en arkoffsetpress

In offset printing, dampening solution is used to create a good balance in the process. If too much water is transferred to the paper, the sheet can change its size between the printing units, due to water absorption, and cause a problem with the colour register. This phenomenon is usually referred to as fanout. In this degree project, an investigation was made to see if the paper dimensions changed through its way in the sheet-fed printing process. The instrument Luchs Register Measuring Systems (Lynx) was used, and a method for measuring if the paper changed its dimensions with this instrument, was developed. Paper qualities with three different grammages were used, 90, 130 and 250 gsm. This investigation showed that all paper qualities changed their size with widening in the gripper edge in the range of 10 - 70 µm and in the trailing edge the increase was 10 - 130 µm. The elongations of the papers were in the range of 10- 300 µm. The papers with lowest grammage changed more than the heavier. To see if the print had been affected of the widening and elongation, print quality parameters like relative contrast, dot gain and mottle were correlated with the Lynx data from the sheets. The group of papers that gave correlations were in 130 gsm. The sheets had visual doubling and the combined standard deviation from the Lynx marks K3, K5 and K21 correlated with dot gain. When the variations increased so did the dot gain and this indicates that the doubling was due to the widening. There was also a correlation between the standard deviation from K3 and Mottle. The sheets widened with an average of 30 µm in the gripper edge and since there probably were doubling due to widening it also affected the Mottle values. What the widening depends on is hard to tell. Since widening was so small, it could be due to water absorption, papers being ironed out or maybe the sheets have been flattened out. It probably needs a more detailed investigation to find out what causes the widening. Further investigations about how print quality is affected by the register accuracy of a printing machine should include a print form with measuring areas close to the Lynx marks. The measuring areas should contain fine hairlines, negative text printed with at least two colours and some pictures to evaluate together with standard measuring should give a good knowledge about the subject.

Varumärkning för småföretag

In this degree project a study of the importance of a graphic identity to companies has been done. A questionnaire among small companies in Dalarna has beenmade. From this, three sets of graphic profile-program have been formed andthese are suitable for new companies. Finally a practical application has been made on Greenfield in Mora, a graphic profile has been designed.To cause an identity is to prove that someone or something exists by individualizingand distinguish. Every individual or company has its qualities or charasteristics.The way to a desirable identity is going by a corporate identity-program that containsthe companies strategies, people, products, buildings, trademarks, graphic design. To create an identity a well considered strategy is needed, where all members of the company are involved. This will lead to a positive image and means for an efficient market communication. The identity of the company is that the company wish what the company/product will stand for, but the image is what the market think about the company/product. The surrounding worldwill be convinced that the company is a reliable producer or deliverer. The companyvill also be regarded as useful and responsable, profitable as an object or partner and a good place of work.Today, trademarking is the most important carrier of identity for a company. A trademark, like a word, a picture or a slogan, will distinguish a product from theothers. What is needed to build up a strong trademark? How can a trade markbe developed to an advantage?To get a lot of people in the same direction clear guidlines are needed. Usually you focused on graphic design, especially the symbols and marks of the companies.The results are presented on a graphic profile, documented in a graphic manual.

Färg och missfärgning hos sågad björk : - Variation samt effekter av avverkningstidpunkt, lagring av timmer och torkning av sågad vara

Variation i björkvirkets färg beror på art, läge i träd, ursprung och lagringstid. Vårtbjörk har en mörkare färg än glasbjörk, men livligare struktur och glans. Timmer hugget under tillväxtsäsongen bör sågas färskt eller lagras högst en månad. Vid brädgårdstorkning är god luftcirkulation och skydd för väta och direkt solljus väsentligt. Strövirkets färskhet är av stor betydelse för att undvika fuktfärgning av virket.Variation in birch colours depend on species, position in tree, origin and the storage period. White birch is darker than hairy birch but with a lively structure and shine. During vegetation period timber storage exceeding one month should be avoided. Air circulation, protection from rain and direct sunlight are essential for yard drying. Freshness of stickers used for stacking is important to avoid water marks on wood surface.

Dissonant Voices : Philosophy, Children's Literature, and Perfectionist Education

Dissonant Voices has a twofold aspiration. First, it is a philosophical treatment of everyday pedagogical interactions between children and their elders, between teachers and pupils. More specifically it is an exploration of the possibilities to go on with dissonant voices that interrupt established practices – our attunement – in behaviour, practice and thinking. Voices that are incomprehensible or expressions that are unacceptable, morally or otherwise. The text works on a tension between two inclinations: an inclination to wave off, discourage, or change an expression that is unacceptable or unintelligible; and an inclination to be tolerant and accept the dissonant expression as doing something worthwhile, but different. The second aspiration is a philosophical engagement with children’s literature. Reading children’s literature becomes a form of philosophising, a way to explore the complexity of a range of philosophical issues. This turn to literature marks a dissatisfaction with what philosophy can accomplish through argumentation and what philosophy can do with a particular and limited set of concepts for a subject, such as ethics. It is a way to go beyond philosophising as the founding of theories that justify particular responses. The philosophy of dissonance and children’s literature becomes a way to destabilise justifications of our established practices and ways of interacting. The philosophical investigations of dissonance are meant to make manifest the possibilities and risks of engaging in interactions beyond established agreement or attunements. Thinking of the dissonant voice as an expression beyond established practices calls for improvisation. Such improvisations become a perfectionist education where both the child and the elder, the teacher and the student, search for as yet unattained forms of interaction and take responsibility for every word and action of the interaction. The investigation goes through a number of picture books and novels for children such as Harry Potter, Garmann’s Summer, and books by Shaun Tan, Astrid Lindgren and Dr. Seuss as well narratives by J.R.R. Tolkien, Henrik Ibsen, Jane Austen and Henry David Thoreau. These works of fiction are read in conversation with philosophical works of, and inspired by, Ludwig Wittgenstein and Stanley Cavell, their moral perfectionism and ordinary language philosophy.