Paper dimensional stability in sheet-fed offset printing : Papperets dimensionsstabilitet i en arkoffsetpress

In offset printing, dampening solution is used to create a good balance in the process. If too much water is transferred to the paper, the sheet can change its size between the printing units, due to water absorption, and cause a problem with the colour register. This phenomenon is usually referred to as fanout. In this degree project, an investigation was made to see if the paper dimensions changed through its way in the sheet-fed printing process. The instrument Luchs Register Measuring Systems (Lynx) was used, and a method for measuring if the paper changed its dimensions with this instrument, was developed. Paper qualities with three different grammages were used, 90, 130 and 250 gsm. This investigation showed that all paper qualities changed their size with widening in the gripper edge in the range of 10 - 70 µm and in the trailing edge the increase was 10 - 130 µm. The elongations of the papers were in the range of 10- 300 µm. The papers with lowest grammage changed more than the heavier. To see if the print had been affected of the widening and elongation, print quality parameters like relative contrast, dot gain and mottle were correlated with the Lynx data from the sheets. The group of papers that gave correlations were in 130 gsm. The sheets had visual doubling and the combined standard deviation from the Lynx marks K3, K5 and K21 correlated with dot gain. When the variations increased so did the dot gain and this indicates that the doubling was due to the widening. There was also a correlation between the standard deviation from K3 and Mottle. The sheets widened with an average of 30 µm in the gripper edge and since there probably were doubling due to widening it also affected the Mottle values. What the widening depends on is hard to tell. Since widening was so small, it could be due to water absorption, papers being ironed out or maybe the sheets have been flattened out. It probably needs a more detailed investigation to find out what causes the widening. Further investigations about how print quality is affected by the register accuracy of a printing machine should include a print form with measuring areas close to the Lynx marks. The measuring areas should contain fine hairlines, negative text printed with at least two colours and some pictures to evaluate together with standard measuring should give a good knowledge about the subject.

Ink-Jet Printing of Color Optical Filters for LCD Applications

At the age of multi-media, portable electronic devices such as mobile phones, personal digital assistant and handheld gaming systems have increased the demand for high performance displays with low cost production. Inkjet printing color optical filters (COF) for LCD applications seem to be an interesting alternative to decrease the production costs. The advantage of inkjet printing technology is to be fast, accurate, easy to run and cheaper than other technologies. In this master thesis work, we used various disciplines such as optical microscopy, rheology, inkjet printing, profilometering and colorimetry. The specific aim of the thesis was to investigate the feasibility of using company-A pigment formulation in inkjet production of COF for active matrix LCD applications. Ideal viscosity parameters were determined from 10 to 20mPa·s for easy inkjet printing at room temperature. The red pigments used are fully dispersed into the solvent and present an excellent homogenous repartition after printing. Thickness investigations revealed that the printed COF were equal or slightly thicker than typically manufactured ones. The colorimetry investigations demonstrated color coordinates very close to the NTSC red standard. LED backlighting seems to be a valuable solution to combine with the printed COF regarding to the spectrum and color analysis. The results on this thesis will increase the understanding of inkjet printing company-A pigments to produce COF for LCD applications.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Studie av web to print samt kartläggning av kunders behov för tillämpning av systemet CiPublisher

Customers put their printing suppliers to severe claims for shorter production time and faster deliveries.Printers always look for new solutions to increase the satisfaction of their customers. Oneexample of such a solution is web to print, where the customers book their printed matters atInternet.The solution involves design of printed matter by using templates that are made unique for thecustomer's printed matter. Web to print is suitable for reiterated printed matters. By using templatesthe customer doesn´t have to redo their layout for every new edition. Bromma tryck AB hasinvested the system CiPublisher, which is applied for the customer to make their printed matter atInternet.The purpose of the examination work is to investigate the needs of the customers of Brommatryck for a web to print solution and how such a system should be adapted.The result shows that the customer who is in need of a web to print solution wish such a system tobe easy managed and also usable. The customer inquiry also shows that most of the customers primarydesire for start using such a solution is that it will save time and also simplify the process formanufacturing of printing matters.

Färgperception och grafisk profilering av Hedemora Assistansservie

An inquiring study of literature has been conducted, about the human colour perception (theimpression of colours). The colour has been examined, both as conscious and subconscious signal,and reasons for it’s influence have been exammed.The practical parts of the degree project have been carried out in active collaboration with thecustomer, The Association Hedemora Assistansservice (HASS), which offers handicapped persons astimulating spare time by personal assistance. A graphical profile-programme and an informationfolderhave been produced, easy received by both handicapped (with defective vision) and normallysighted persons. The graphical profile-programme was made in collaboration with the customer.Concerning the information-folder HASS took the main responsibility for the choice of photographswhile layout, text writing, colour-reproduction, original-production and connecting printing workswere made independently. The customer has shown engagement and interest and had a lot of opinionsabout the degree project, of which have been paid attention.

Werv Magazine : layout och koncept av ett nytt livsstilsmagasin för tjejer inom brädsporter.

Currently there is no Swedish boardsport magazine for women. In this degree project a prototype of a new lifestyle magazine for women in boardsports has been created. Through a magazine study and a targetgroup survey we have found a magazine concept and suggestions for the magazine content. A digital 96-page prototype has been created. The feedback from Anders Neuman-Östberg, the experienced editor in chief of the Swedish boardsport magazine Transistion gives the project report the needed credibility.The overall response from all the people involved in the making of this prototype has been positive. We can see a market demand for a magazine like Werv and hope that we can find a way to publish it in the future. In this degree project we haven't looked into the economic sustainability and therefore we can't say if it's feasible. Further investigations are needed before Werv can be published.

Printing colour hard proofs using EFI Colorproof XF v. 3.1 and Photoshop CS3, and production substrates.

EFI Colorproof XF was found to be more convenient from a user’s aspect, and had features which are covered in the ISO 12647-7 standard (e.g. the ability to simulate screening and print margin information), which Photoshop CS3 lacked. None of the proofing systems distinguished itself in a clear way from the other; sometimes, on certain substrates, Photoshop CS3 produced most accurate colours, sometimes EFI Colorproof XF did. Further investigations need to be carried out to tell more exactly which system produce most accurate colours. Only 6 out of 34 simulation-combinations had colours within the tolerances in the standard. The result also shows that the production substrates should not be used as proofing substrates. Instead the proofing papers especially made for ink jet should be used to obtain more colour-accurate prints.

Photovoltaic System Design for a Contaminated Area in Falun – Comparison of South and East- West Layout

In this thesis the solar part of a large grid-connected photovoltaic system design has been done. The main purpose was to size and optimize the system and to present figures helping to evaluate the prospective project rationality, which can potentially be constructed on a contaminated area in Falun. The methodology consisted in PV market study and component selection, site analysis and defining suitable area for solar installation; and system configuration optimization based on PVsyst simulations and Levelized Cost of Energy calculations. The procedure was mainly divided on two parts, preliminary and detailed sizing. In the first part the objective was complex, which included the investigation of the most profitable component combination and system optimization due to tilt and row distance. It was done by simulating systems with different components and orientations, which were sized for the same 100kW inverter in order to make a fair comparison. For each simulated result a simplified LCOE calculation procedure was applied. The main results of this part show that with the price of 0.43 €/Wp thin-film modules were the most cost effective solution for the case with a great advantage over crystalline type in terms of financial attractiveness. From the results of the preliminary study it was possible to select the optimal system configuration, which was used in the detailed sizing as a starting point. In this part the PVsyst simulations were run, which included full scale system design considering near shadings created by factory buildings. Additionally, more complex procedure of LCOE calculation has been used here considered insurances, maintenance, time value of money and possible cost reduction due to the system size. Two system options were proposed in final results; both cover the same area of 66000 m2. The first one represents an ordinary South faced design with 1.1 MW nominal power, which was optimized for the highest performance. According to PVsyst simulations, this system should produce 1108 MWh/year with the initial investment of 835,000 € and 0.056 €/kWh LCOE. The second option has an alternative East-West orientation, which allows to cover 80% of occupied ground and consequently have 6.6 MW PV nominal power. The system produces 5388 MWh/year costs about 4500,000 € and delivers electricity with the same price of 0.056 €/kWh. Even though the EW solution has 20% lower specific energy production, it benefits mainly from lower relative costs for inverters, mounting and annual maintenance expenses. After analyzing the performance results, among the two alternatives none of the systems showed a clear superiority so there was no optimal system proposed. Both, South and East-West solutions have own advantages and disadvantages in terms of energy production profile, configuration, installation and maintenance. Furthermore, the uncertainty due to cost figures assumptions restricted the results veracity.

Layout och typografi i vetenskapliga artiklar : En kartläggning av konventioner gällande grafisk formgivning inom matematik, medicin och utbildningsvetenskap

En deskriptiv visuell innehållsanalys genomfördes med en korpus bestående av vetenskapliga artiklar från 30 topprankade tidskrifter jämnt fördelade på de tre disciplinerna matematik, medicin och utbildningsvetenskap, med syfte att undersöka om det fanns ett samband mellan tidskrifternas disciplintillhörighet och den grafiska formgivningen. Kartläggningen omfattade layout (bl.a. sidformat, spalter, marginalstorlek, användning av grafiska element, placering av tabeller, figurer och pagina) och typografiskt utseende hos titel, rubriker, brödtext och abstrakt (t.ex. teckenstorlek, textjustering, teckengrovlek, typsnitt, färg och radavstånd). Resultaten visar att disciplinerna använde olika men även gemensamma konventioner i sitt grafiska utseende. Matematik uppvisade enkelspaltig layout med liten typografisk variation, genomgående användning av typsnitt från familjen Transitional eller Transitional/Didone för hela dokumentet, avsaknad av kulört färg och sällan användning av grafiska element. Medicin uppvisade större variation med användning av kulört färg, icke-centrerad typografi med både sansseriff- och seriff-typsnitt, grafiska element och ramar som förstärker det ofta använda dubbelspaltiga gridsystemet. Utbildningsvetenskap uppvisade en grafisk design som återfanns i båda disciplinerna, men påminde mest om matematik till utseendet. Kodbok ingår i sin helhet som bilaga. Uppsatsen i sig är delvis formgiven med utgångspunkt i de erhållna resultaten.