Experimental study of forces and energies during shearing of steel sheet with angled tools

Shearing is a fast and inexpensive method to cut sheet metal that has been used since the beginning of the industrialism. Consequently, published experimental studies of shearing can be found from over a century back in time. Recent studies, however, are due to the availability of low cost digital computation power, mostly based on finite element simulations that guarantees quick results. Still, for validation of models and simulations, accurate experimental data is a requisite. When applicable, 2D models are in general desirable over 3D models because of advantages like low computation time and easy model formulation. Shearing of sheet metal with parallel tools is successfully modelled in 2D with a plane strain approximation, but with angled tools the approximation is less obvious. Therefore, plane strain approximations for shearing with angled tools were evaluated by shear experiments of high accuracy. Tool angle, tool clearance, and clamping of the sheet were varied in the experiments. The results showed that the measured forces in shearing with angled tools can be approximately calculated using force measurements from shearing with parallel tools. Shearing energy was introduced as a quantifiable measure of suitable tool clearance range. The effects of the shearing parameters on forces were in agreement with previous studies. Based on the agreement between calculations and experiments, analysis based on a plane strain assumption is considered applicable for angled tools with a small (up to 2 degrees) rake angle.

Experimental study of strain fields during shearing of medium and high-strength steel sheet

There is a shortage of experimentally determined strains during sheet metal shearing. These kinds of data are a requisite to validate shearing models and to simulate the shearing process. In this work, strain fields were continuously measured during shearing of a medium and a high strength steel sheet, using digital image correlation. Preliminary studies based on finite element simulations, suggested that the effective surface strains are a good approximation of the bulk strains below the surface. The experiments were performed in a symmetric set-up with large stiffness and stable tool clearances, using various combinations of tool clearance and clamping configuration. Due to large deformations, strains were measured from images captured in a series of steps from shearing start to final fracture. Both the Cauchy and Hencky strain measures were considered, but the difference between these were found negligible with the number of increments used (about 20 to 50). Force-displacement curves were also determined for the various experimental conditions. The measured strain fields displayed a thin band of large strain between the tool edges. Shearing with two clamps resulted in a symmetric strain band whereas there was an extended area with large strains around the tool at the unclamped side when shearing with one clamp. Furthermore, one or two cracks were visible on most of the samples close to the tool edges well before final fracture. The fracture strain was larger for the medium strength material compared with the high-strength material and increased with increasing clearance.

No consensus on gestational diabetes mellitus screening regimes in Sweden : pregnancy outcomes in relation to different screening regimes 2011 to 2012, a cross-sectional study

Background: Although associated adverse pregnancy outcomes, no international or Swedish consensus exists that identifies a cut-off value or what screening method to use for definition of gestational diabetes mellitus. This study investigates the following: i) guidelines for screening of GDM; ii) background and risk factors for GDM and selection to OGTT; and iii) pregnancy outcomes in relation to GDM, screening regimes and levels of OGTT 2 hour glucose values. Methods: This cross-sectional and population-based study uses data from the Swedish Maternal Health Care Register (MHCR) (2011 and 2012) combined with guidelines for GDM screening (2011-2012) from each Maternal Health Care Area (MHCA) in Sweden. The sample consisted of 184, 183 women: 88, 140 in 2011 and 96,043 in 2012. Chi-square and two independent samples t-tests were used. Univariate and multivariate logistic regression analyses were performed. Results: Four screening regimes of oral glucose tolerance test (OGTT) (75 g of glucose) were used: A) universal screening with a 2-hour cut-off value of 10.0 mmol/L; B) selective screening with a 2-hour cut-off value of 8.9 mmol/L; C) selective screening with a 2-hour cut-off value of 10.0 mmol/L; and D) selective screening with a 2-hour cut-off value of 12.2 mmol/L. The highest prevalence of GDM (2.9%) was found with a 2-hour cut-off value of 8.9 mmol/L when selective screening was applied. Unemployment and low educational level were associated with an increased risk of GDM. The OR was 4.14 (CI 95%: 3.81-4.50) for GDM in obese women compared to women with BMI <30 kg/m(2). Women with non-Nordic origin presented a more than doubled risk for GDM compared to women with Nordic origin (OR = 2.24; CI 95%: 2.06-2.43). Increasing OGTT values were associated with increasing risks of adverse pregnancy outcomes. Conclusions: There was no consensus regarding screening regimes for GDM from 2011 through 2012 when four different regimes were applied in Sweden. Increasing levels of OGTT 2-hour glucose values were strongly associated with adverse pregnancy outcomes. Based on these findings, we suggest that Sweden adopts the recent recommendations of the International Association of Diabetes and Pregnancy Study Group (IADPSG) concerning the performance of OGTT and the diagnostic criteria for GDM.

Game Audio in Audio Games : Towards a Theory on the Roles and Functions of Sound in Audio Games

For the past few decades, researchers have increased our understanding of how sound functions within various audio–visual media formats. With a different focus in mind, this study aims to identify the roles and functions of sound in relation to the game form Audio Games, in order to explore the potential of sound when acting as an autonomous narrative form. Because this is still a relatively unexplored research field, the main purpose of this study is to help establish a theoretical ground and stimulate further research within the field of audio games. By adopting an interdisciplinary approach to the topic, this research relies on theoretical studies, examinations of audio games and contact with the audio game community. In order to reveal the roles of sound, the gathered data is analyzed according to both a contextual and a functional perspective. The research shows that a distinction between the terms ‘function’ and ‘role’ is important when analyzing sound in digital games. The analysis therefore results in the identification of two analytical levels that help define the functions and roles of an entity within a social context, named the Functional and the Interfunctional levels. In addition to successfully identifying three main roles of sound within audio games—each describing the relationship between sound and the entities game system, player and virtual environment—many other issues are also addressed. Consequently, and in accordance with its purpose, this study provides a broad foundation for further research of sound in both audio games and video games.

The functions of Japanese Sound Symbolic Words in Different Types of Texts and Their Translation

Though sound symbolic words (onomatopoeia and mimetic words, or giongo and gitaigo in Japanese) exist in other languages, it would not be so easy to compare them to those in Japanese. This is because unlike in Japanese, in many other languages (here we see English and Spanish) sound symbolic words do not have distinctive forms that separate them immediately from the rest of categories of words. In Japanese, a sound symbolic word has a radical (that is based on the elaborated Japanese sound symbolic system), and often a suffix that shows subtle nuance. Together they give the word a distinctive form that differentiates it from other categories of words, though its grammatical functions could vary, especially in the case of mimetic words (gitaigo). Without such an obvious feature, in other languages, it would not be always easy to separate sound symbolic words from the rest. These expressions are extremely common and used in almost all types of text in Japanese, but their elaborated sound symbolic system and possibly their various grammatical functions are making giongo and gitaigo one of the most difficult challenges for the foreign students and translators. Studying the translation of these expressions into other languages might give some indication related to the comparison of Japanese sound symbolic words and those in other languages. Though sound symbolic words are present in many types of texts in Japanese, their functions in traditional forms of text (letters only) and manga (Japanese comics)are different and they should be treated separately. For example, in traditional types of text such as novels, the vast majority of the sound symbolic words used are mimetic words (gitaigo) and most of them are used as adverbs, whereas in manga, the majority of the sound symbolic words used (excluding those appear within the speech bubbles) are onomatopoeias (giongo) and often used on their own (i.e. not as a part of a sentence). Naturally, the techniques used to translate these expressions in the above two types of documents differ greatly. The presentation will focus on i) grammatical functions of Japanese sound symbolic words in traditional types of texts (novels/poems) and in manga works, and ii) whether their features and functions are maintained (i.e. whether they are translated as sound symbolic words) when translated into other languages (English and Spanish). The latter point should be related to a comparison of sound symbolic words in Japanese and other languages, which will be also discussed.

The international marketing strategy of grocery retailers – the strategy of adaptation and standardization

Research question – The research question, that this study attempts to answer, is, what and why grocery retailers, which specifically work with the strategy of standardization, adapt in their marketing mix to the host market. Main adaptations are analyzed with regard to psychic distance in terms of consumer characteristics. Methodology – This study presents a qualitative research design. Secondary data, in-depth interviews and personal observations were used, in order to identify adaptations, which were conducted in a grocery retailer in Germany, which is its home market, and in Sweden, which is considered to be a host market. Findings – The main findings of this research indicate that grocery retailers that specifically work with the strategy of standardization, adopt their core strategy at the host market, in order to keep their economy of scale. However, the standardization strategy may cause negative financial results, which is why adaptations, in order to attract new customers, are required. Conclusively, a mix of both, the adaptation and standardization marketing strategy, has to be utilized.

Guides of the Falu Mine : Perceptions of Differences and Similarities onDomestic and International Visitors

Industrial heritage tourism has been in focus for many academic studies and tourism is an alternative developmental tool for mines and contributes to their economic success. This thesis is about the Falu Mine in Dalarna, Sweden, which has World Heritage status since 2001 and is one of the biggest attractions in the region. Its history and cultural importance are reasons for the importance of preserving the heritage. The Falu Mine is under the management of the Great Copper Mountain Trust and one of their ambitions is to ensure the continuous popularity among domestic and international visitors. In order to gain a better understanding of the visitors and to find strategies to improve performance, a visitor survey has been conducted in the summer of 2011. It is the authors believe that the guides of the Falu Mine have the best available insight and that their perceptions help to add to the understanding about the visitors. Therefore, this thesis aims to explore the perceptions of the guides about their visitors, to investigate how the perceptions correspond to the statistical results and to study if there are any differences between domestic and international visitors. The mixed methods approach will increase the depth and accuracy of the results, by linking qualitative with quantitative data. The results show that differences between domestic and international visitors exist, both proven by interviews with the guides and the visitor survey. These differences occur in the factors, such as level of education of the visitors, group size and number of children in the group, knowledge of the visitors prior to and after the visit, sources of information and the fulfillment of the visitor expectations. The perceptions emphasize how these differences impact the guided tours. The guides of the Falu Mine have to be aware of those differences in order to adjust the tour accordingly, as well as the management of the Falu Mine can use this knowledge in order to identify strategies for improving performance.

Association of soluble tumor necrosis factor receptors 1 and 2 with nephropathy, cardiovascular events, and total mortality in type 2 diabetes

AIMS/HYPOTHESIS: Soluble tumor necrosis factor receptors 1 and 2 (sTNFR1 and sTNFR2) contribute to experimental diabetic kidney disease, a condition with substantially increased cardiovascular risk when present in patients. Therefore, we aimed to explore the levels of sTNFRs, and their association with prevalent kidney disease, incident cardiovascular disease, and risk of mortality independently of baseline kidney function and microalbuminuria in a cohort of patients with type 2 diabetes. In pre-defined secondary analyses we also investigated whether the sTNFRs predict adverse outcome in the absence of diabetic kidney disease. METHODS: The CARDIPP study, a cohort study of 607 diabetes patients [mean age 61 years, 44 % women, 45 cardiovascular events (fatal/non-fatal myocardial infarction or stroke) and 44 deaths during follow-up (mean 7.6 years)] was used. RESULTS: Higher sTNFR1 and sTNFR2 were associated with higher odds of prevalent kidney disease [odd ratio (OR) per standard deviation (SD) increase 1.60, 95 % confidence interval (CI) 1.32-1.93, p < 0.001 and OR 1.54, 95 % CI 1.21-1.97, p = 0.001, respectively]. In Cox regression models adjusting for age, sex, glomerular filtration rate and urinary albumin/creatinine ratio, higher sTNFR1 and sTNFR2 predicted incident cardiovascular events [hazard ratio (HR) per SD increase, 1.66, 95 % CI 1.29-2.174, p < 0.001 and HR 1.47, 95 % CI 1.13-1.91, p = 0.004, respectively]. Results were similar in separate models with adjustments for inflammatory markers, HbA1c, or established cardiovascular risk factors, or when participants with diabetic kidney disease at baseline were excluded (p < 0.01 for all). Both sTNFRs were associated with mortality. CONCLUSIONS/INTERPRETATIONS: Higher circulating sTNFR1 and sTNFR2 are associated with diabetic kidney disease, and predicts incident cardiovascular disease and mortality independently of microalbuminuria and kidney function, even in those without kidney disease. Our findings support the clinical utility of sTNFRs as prognostic markers in type 2 diabetes.