Syskonplaceringens betydelse för locus of control

Skillnader mellan förstfödda och senarefödda är ett vanligt undersökningsobjekt, där välkända stereotyper finns. Förstfödda anses vara mer målinriktade, konservativa, ansvarstagande och kravfyllda, medan senarefödda ofta påstås vara tvungna att bryta mönster och är därför mer rebelliska och öppna för nya erfarenheter. Syftet med föreliggande studie var att undersöka syskonplaceringens påverkan på sättet att attribuera orsakerna till händelser och prestationer. Rotters locus of control-skala användes i en Internetbaserad enkät, till vilken en öppen annonsering nyttjades. Studien använde en inomfamiljsdesign och begränsandes till att omfatta en traditionell kärnfamilj med biologiska föräldrar och enbart helsyskon. Hypotesen att förstfödda oftare än senarefödda styrs av inre locus of control kunde godtas. Resultatet visades i första hand gälla förstfödda män. Resultaten tros till största delen bero på föräldrarnas uppfostringsstil och olika ansvarsfördelning mellan syskon.

Locus of Controls inverkan på strategier för konflikthantering i kärleksrelationer

Syftet var att undersöka om personers Locus of Control påverkar deras konflikthanteringsstrategier i kärleksrelationer. Hypoteserna var: H1: Det finns skillnader mellan personer med extern och intern Locus of Control när det gäller vilka typer av strategier de använder för att hantera kärleksrelationsproblem. H2: Personer med intern Locus of Control har större benägenhet att använda sig av relationskonflikthanteringsstrategin Kompromiss i sina kärleksrelationer. H3: Kvinnor påverkas mer än män av Locus of Control när det gäller vilka typer av strategier de använder för att hantera kärleksrelationsproblem. Deltagarna var 172 studenter. Data insamlades med en webbenkät innehållande svenska versioner av Rotters I-E skala och RPCS. Resultatet visade en signifikant skillnad mellan personer med intern och extern Locus of Control i tre konflikthanteringsstrategier: Kompromiss, Underkastelse och Undvikande. Vidare använde personer med intern Locus of Control Kompromiss mer. Personer med extern Locus of Control använde Underkastelse och Undvikande mer. Skillnaderna fanns bara bland kvinnorna. Samtliga hypoteser kunde därmed godtas. Undersökningen visade att Locus of Control är en möjlig anledning till varför personer använder sig av vissa typer av konflikthanteringsstrategier i kärleksrelationer.

Internal validity of the Swedish Maternal Health Care Register

Background: The Swedish Maternal Health Care Register (MHCR) is a national quality register that has been collecting pregnancy, delivery, and postpartum data since 1999. A substantial revision of the MHCR resulted in a Web-based version of the register in 2010. Although MHCR provides data for health care services and research, the validity of the MHCR data has not been evaluated. This study investigated degree of coverage and internal validity of specific variables in the MHCR and identified possible systematic errors. Methods: This cross-sectional observational study compared pregnancy and delivery data in medical records with corresponding data in the MHCR. The medical record was considered the gold standard. The medical records from nine Swedish hospitals were selected for data extraction. This study compared data from 878 women registered in both medical records and in the MHCR. To evaluate the quality of the initial data extraction, a second data extraction of 150 medical records was performed. Statistical analyses were performed for degree of coverage, agreement and correlation of data, and sensitivity and specificity. Results: Degree of coverage of specified variables in the MHCR varied from 90.0% to 100%. Identical information in both medical records and the MHCR ranged from 71.4% to 99.7%. For more than half of the investigated variables, 95% or more of the information was identical. Sensitivity and specificity were analysed for binary variables. Probable systematic errors were identified for two variables. Conclusions: When comparing data from medical records and data registered in the MHCR, most variables in the MHCR demonstrated good to very good degree of coverage, agreement, and internal validity. Hence, data from the MHCR may be regarded as reliable for research as well as for evaluating, planning, and decision-making with respect to Swedish maternal health care services.

Pendlingens påverkan på KASAM

Många hushåll och individer har i dagens samhälle tvingats börja pendla till sina arbeten bl.a. på grund av en förändrad arbetsmarknad. Syftet med föreliggande studie var att se om individer som pendlar regelbundet har ett lägre KASAM. Utgångspunkten var att individer med en mer extern kontrollokus ofta har lägre KASAM och att pendling hypotetiskt sett bör påverka individen lokus i en extern riktning. Sammanlagt 27 försökspersoner i åldrarna 22 – 50 år undersöktes med hjälp av KASAM test och I-E test. Deltagarna togs med bekvämlighetsurval från ett nordiskt flygbolag i Sverige, där 13 personer pendlande till arbetet och 14 var bosatta på arbetsorten, vilket visade att KASAM var signifikant lägre på 5 % nivå för de pendlande individerna, samt att kontrollokus var signifikant mer externt, också på 5 % nivå. Vidare forskning bör fokusera på individer från andra branscher för att se om resultaten är allmänna.

The Evolution of a Responsibility to Protect in Africa : The African Unions Emerging Peace and Security Regime

The thesis focuses on, and tries to evaluate, the role that the African Union (AU) plays in protecting the peace and security on the African continent. The thesis takes an interdisciplinary approach to the topic by both utilizing international relations and international law theories. The two disciplines are combined in an attempt to understand the evolution of the AU’s commitment to the pragmatist doctrine: responsibility to protect (R2P). The AU charter is considered to be the first international law document to cover R2P as it allows the AU to interfere in the internal affairs of its member states. The R2P doctrine was evolved around the notion of a need to arrive at a consensus in regard to the right to intervene in the face of humanitarian emergencies. A part of the post-Cold War shift in UN behaviour has been to support local solutions to local problems. Hereby the UN acts in collaboration with regional organizations, such as the AU, to achieve the shared aspirations to maintain international peace and security without getting directly involved on the ground. The R2P takes a more holistic and long-term approach to interventions by including an awareness of the need to address the root causes of the crisis in order to prevent future resurrections of conflicts. The doctrine also acknowledges the responsibility of the international community and the intervening parties to actively participate in the rebuilding of the post-conflict state. This requires sustained and well planned support to ensure the development of a stable society.While the AU is committed to implementing R2P, many of the AU’s members are struggling, both ideologically and practically, to uphold the foundations on which legitimate intervention rests, such as the protection of human rights and good governance. The fact that many members are also among the poorest countries in the world adds to the challenges facing the AU. A lack of human and material resources leads to a situation where few countries are willing, or able, to support a long-term commitment to humanitarian interventions. Bad planning and unclear mandates also limit the effectiveness of the interventions. This leaves the AU strongly dependent on regional powerbrokers such as Nigeria and South Africa, which in itself creates new problems in regard to the motivations behind interventions. The current AU charter does not provide sufficient checks and balances to ensure that national interests are not furthered through humanitarian interventions. The lack of resources within the AU also generates worries over what pressure foreign nations and other international actors apply through donor funding. It is impossible for the principle of “local solutions for local problems? to gain ground while this donor conditionality exists.The future of the AU peace and security regime is not established since it still is a work in progress. The direction that these developments will take depends on a wide verity of factors, many of which are beyond the immediate control of the AU.

Supervision as control system : the design of supervision as a regulatory instrument in the social services sector in Sweden

In this article, the prevailing official view of supervision as a regulatory instrument is examined as it applies to the social services sector in Sweden. The study is based on a comparison of the views expressed on the design of supervision as a regulatory instrument by two government commissions, the Supervision Commission and the Commission on Supervision within the Social Services (UTIS), and on the positions taken by the Government regarding the definitions of the concept of supervision proposed by these commissions. The view of supervision as a regulatory instrument expressed in these policy documents is analysed with the help of a theoretical framework describing the components, their functions and the governance characteristics of control systems. In the framework separate interrelated characteristics of the components are identified and summarized into two models of control systems. The analysis shows that supervision in the Swedish social services sector can be described in terms of both a disciplinary and non-disciplinary system. By its system theoretical basis and the identification of interrelated characteristics the study contributes to a broadened understanding of the construction and functions of supervision as a regulatory instrument and of how supervision within the Swedish social sector is meant to be designed.

Design and application of experimental methods for steel sheet shearing

Shearing is the process where sheet metal is mechanically cut between two tools. Various shearing technologies are commonly used in the sheet metal industry, for example, in cut to length lines, slitting lines, end cropping etc. Shearing has speed and cost advantages over competing cutting methods like laser and plasma cutting, but involves large forces on the equipment and large strains in the sheet material. The constant development of sheet metals toward higher strength and formability leads to increased forces on the shearing equipment and tools. Shearing of new sheet materials imply new suitable shearing parameters. Investigations of the shearing parameters through live tests in the production are expensive and separate experiments are time consuming and requires specialized equipment. Studies involving a large number of parameters and coupled effects are therefore preferably performed by finite element based simulations. Accurate experimental data is still a prerequisite to validate such simulations. There is, however, a shortage of accurate experimental data to validate such simulations. In industrial shearing processes, measured forces are always larger than the actual forces acting on the sheet, due to friction losses. Shearing also generates a force that attempts to separate the two tools with changed shearing conditions through increased clearance between the tools as result. Tool clearance is also the most common shearing parameter to adjust, depending on material grade and sheet thickness, to moderate the required force and to control the final sheared edge geometry. In this work, an experimental procedure that provides a stable tool clearance together with accurate measurements of tool forces and tool displacements, was designed, built and evaluated. Important shearing parameters and demands on the experimental set-up were identified in a sensitivity analysis performed with finite element simulations under the assumption of plane strain. With respect to large tool clearance stability and accurate force measurements, a symmetric experiment with two simultaneous shears and internal balancing of forces attempting to separate the tools was constructed. Steel sheets of different strength levels were sheared using the above mentioned experimental set-up, with various tool clearances, sheet clamping and rake angles. Results showed that tool penetration before fracture decreased with increased material strength. When one side of the sheet was left unclamped and free to move, the required shearing force decreased but instead the force attempting to separate the two tools increased. Further, the maximum shearing force decreased and the rollover increased with increased tool clearance. Digital image correlation was applied to measure strains on the sheet surface. The obtained strain fields, together with a material model, were used to compute the stress state in the sheet. A comparison, up to crack initiation, of these experimental results with corresponding results from finite element simulations in three dimensions and at a plane strain approximation showed that effective strains on the surface are representative also for the bulk material. A simple model was successfully applied to calculate the tool forces in shearing with angled tools from forces measured with parallel tools. These results suggest that, with respect to tool forces, a plane strain approximation is valid also at angled tools, at least for small rake angles. In general terms, this study provide a stable symmetric experimental set-up with internal balancing of lateral forces, for accurate measurements of tool forces, tool displacements, and sheet deformations, to study the effects of important shearing parameters. The results give further insight to the strain and stress conditions at crack initiation during shearing, and can also be used to validate models of the shearing process.