A simplified heat pump model for use in solar plus heat pump system simulation studies

Solar plus heat pump systems are often very complex in design, with sometimes special heat pump arrangements and control. Therefore detailed heat pump models can give very slow system simulations and still not so accurate results compared to real heat pump performance in a system. The idea here is to start from a standard measured performance map of test points for a heat pump according to EN 14825 and then determine characteristic parameters for a simplified correlation based model of the heat pump. By plotting heat pump test data in different ways including power input and output form and not only as COP, a simplified relation could be seen. By using the same methodology as in the EN 12975 QDT part in the collector test standard it could be shown that a very simple model could describe the heat pump test data very accurately, by identifying 4 parameters in the correlation equation found. © 2012 The Authors.

Computational study of the step size parameter of the subgradient optimization method

The subgradient optimization method is a simple and flexible linear programming iterative algorithm. It is much simpler than Newton's method and can be applied to a wider variety of problems. It also converges when the objective function is non-differentiable. Since an efficient algorithm will not only produce a good solution but also take less computing time, we always prefer a simpler algorithm with high quality. In this study a series of step size parameters in the subgradient equation is studied. The performance is compared for a general piecewise function and a specific p-median problem. We examine how the quality of solution changes by setting five forms of step size parameter.

The impact of big-boxes on local retail : What happens when IKEA comes to town?

The development of large discount retailers, or big-boxes as they are sometimes referred to, are often subject to heated debate and their entry on a market is greeted with either great enthusiasm or dread. For instance, the world’s largest retailer Wal-Mart (Forbes 2014) has a number of anti- and pro-groups dedicated to its being and the event of a Wal-Mart entry tends to be met with protests and campaigns (Decamme 2013) but also welcomed by, for instance, consumers (Davis & DeBonis 2013). Also in Sweden, the entry of a big box is a hot topic and before IKEA’s opening i Borlänge 2013, the first in Sweden in more than five years, great expectations were mixed with worry (Västerbottens-Kuriren 2011).The presence of large scale discount retailers is not, however, a novel phenomenon but a part of a long-term change in retailing that has taken place globally over the past couple of decades (Taylor & Smalling, 2005). As noted by Dawson (2006), the trend in Europe has over the past few decades gone towards an increasing concentration of large firms along with a decrease of smaller firms.This trend is also detectable in the Swedish retail industry. Over the past decade, the retailing industry in Sweden has increased by around 190 Billion SEK, and its share of GDP has risen from 2,7% to 2,9%, while the number of employees have increased from 200 000 to 250 000 (HUI 2013). This growth, however, has not been distributed evenly but rather it has been oriented mainly towards out-of-town retail clusters. Parallel to this development, the number of large retailers has risen at the expense of market shares of smaller independent firms (Rämme et al 2010). Thereby, the presence of large scale retailers is simply part of a changing retail landscape.The effects of this development, where large scale retailing agents relocate shopping to out-of-town shopping areas, have been heavily debated. On the one hand, the big-boxes are accused of displacing independent small retail businesses in the city-centers and the residential areas, resulting in, to some extent, reduced employment opportunities and less availability for the consumers - especially the elderly (Ljungberg et al 2006). In addition, as access to shopping now tends to require some sort of a motorized vehicle, environmental aspects to the discussion have emerged. Ultimately these types of concerns have resulted in calls for regulations against this development (Olsson 2010). On the other hand, the proponents of the new shopping landscape argue that this evolution implies productivity gains, the benefits of lower prices and an increased variety of products (Maican & Orth 2012). Moreover it is argued that it leads to, for instance, better services (such as longer opening hours) and a creative destruction transformation pressure on retailers, which brings about a renewal of city-centerIIretail and services, increasing their attractivity (Bergström 2010). The belief in benefits of a big box entry can be exemplified by the attractivity of IKEA, and the fact that municipalities are prepared to commit to expenses amounting up to hundreds of millions in order to attract the entry of this big-box. Borlänge municipality, for instance, agreed to expenses of about 350 million SEK in order to secure the entry of IKEA, which opened in 2013 (Blomgren 2009).Against this backdrop, the overall effects of large discount retailers become important: Are the economic benefits enough to warrant subsidies or are there, on the contrary, some very compelling grounds for regulations against these types of establishments? In other words; how is overall retail in a region where a store like IKEA enters affected? And how are local retail firms affected?In order to answer these questions, the purpose of this thesis is to study how entry of a big-box retailer affects the entry region. The object of this study is IKEA - one of the world’s largest retailers, with 345 stores, active in over 40 countries and with profits of about 3.3 billion (IKEA 2013; IKEA 2014). By studying the effects of IKEA-entry, both on an aggregated level and on firm level, this thesis intends to find indications of how large discount retail establishments in general can be expected to affect the economic development both in a region overall, but also on the local firm level, something which is of interest to both policymakers as well as the retailing industry in general.The first paper examines the effects of IKEA on retail revenues and employment in the municipalities that IKEA chose to enter between 2000 and 2011; Gothenburg, Haparanda, Kalmar and Karlstad. By means of a matching method we first identify non-entry municipalities that have a similar probability of IKEA entry as the true entry municipalities. Then, using these non-entry municipalities as a control group, the causal effects of IKEA entry can be estimated using a treatment-control approach. We also extend the analysis to examine the spatial impact of IKEA by estimating the effects on retail in neighboring municipalities. It is found that a new IKEA store increases revenues in durable goods trade with 20% in the entry municipality and the number of employees with 17%. Only small, and in most cases statistically insignificant, negative effects were found in neighboring municipalities.It appears that there is a positive net effect on durables retail sales and employment in the entry municipality. However, the analysis is based on data on an aggregated municipality level and thereby it remains unclear if and how the effects vary within the entry municipalities. In addition, the data used in the first study includes the sales and employment of IKEA itself, which could account for the majority of the increases in employment and retail. Thereby the potential spillover effects on incumbent retailers in the entry municipalities cannot be discerned in the first study.IIITo examine effects of IKEA entry on incumbent retail firms, the second paper in this thesis analyses how IKEA entry affects the revenues and employment of local retail firms in three municipalities; Haparanda, Kalmar and Karlstad, which experienced entry by IKEA between 2000 and 2010. In this second study, we exclude Gothenburg due to the fact that big-box entry appears to have weaker effects in metropolitan areas (as indicated by Artz & Stone 2006). By excluding Gothenburg we aim to reduce the geographical heterogeneity in our study. We obtain control municipalities that are as similar as possible to the three entry municipalities using the same method as in the previous study, but including a slightly different set of variables in the selection equation. Using similar retail firms in the control municipalities as our comparison group, we estimate the impact of IKEA entry on revenues and employment for retail firms located at varying distances from the IKEA entry site.The results generated in this study imply that entry by IKEA increases revenues in incumbent retail firms by, on average, 11% in the entry municipalities. In addition, we do not find any significant impact on retail revenues in the city centers of the entry municipalities. However, we do find that retail firms within 1 km of the IKEA experience increases in revenues of about 26%, which indicates large spillover effects in the area nearby the entry site. As expected, this impact decreases as we expand the buffer zone: firms located between 0-2 km experiences a 14% increase and firms in 2-5 km experiences an increase of 10%. We do not find any significant impacts on retail employment.

Design and validation of a sheet metal shearing experimental procedure

Throughout the industrial processes of sheet metal manufacturing and refining, shear cutting is widely used for its speed and cost advantages over competing cutting methods. Industrial shears may include some force measurement possibilities, but the force is most likely influenced by friction losses between shear tool and the point of measurement, and are in general not showing the actual force applied to the sheet. Well defined shears and accurate measurements of force and shear tool position are important for understanding the influence of shear parameters. Accurate experimental data are also necessary for calibration of numerical shear models. Here, a dedicated laboratory set-up with well defined geometry and movement in the shear, and high measurability in terms of force and geometry is designed, built and verified. Parameters important to the shear process are studied with perturbation analysis techniques and requirements on input parameter accuracy are formulated to meet experimental output demands. Input parameters in shearing are mostly geometric parameters, but also material properties and contact conditions. Based on the accuracy requirements, a symmetric experiment with internal balancing of forces is constructed to avoid guides and corresponding friction losses. Finally, the experimental procedure is validated through shearing of a medium grade steel. With the obtained experimental set-up performance, force changes as result of changes in studied input parameters are distinguishable down to a level of 1%.