15 resultados para Hot hands

em Dalarna University College Electronic Archive


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The purpose of this evaluation is to develop a framework that will help in planning and implementing the mobile sport exhibition, increase visitor satisfaction and aid At Bristol in building successful exhibits. The evaluation mainly focuses on visitor interaction with exhibits. It is believed that learning does occur in science centres and museums. The evaluation will therefore find out if learning occurs in the Sports exhibition and if so, the nature of the learning outcomes. The evaluation also discusses advantages and disadvantages of travelling exhibitions and identifies the characteristics of good exhibits that form the basis of the framework.From the results, an indication is that children make the larger proportion of visitors to Sportastic. Their age ranges, under 10 and 10 to 15 years constituted 21% and 30% respectively. The three most enjoyed exhibits are the Sprint Challenge (running), BATAK (test your reaction and Hot Shots (football). Visitors say these exhibits are enjoyed because they are fun, competitive, entertaining, interactive and hands-on. Skateboard Challenge and Skeleton Bob are among the exhibits least enjoyed since they are reported to be boring and uncomfortable to use. The learning outcomes from the exhibits are; increased knowledge about balancing, reaction, pulse and strength.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Helstångsborr och konstång kallas bergborrverktyg, som tillverkas av sexkantiga stänger med inre hål för ledning av spolvatten. Dessa spolhål är klädda med ferritiskt rostfritt stål. Innan valsning borras ett centrerat hål i stålämnet som ska valsas. I det borrade hålet appliceras ett rör av ferritiskt rostfritt stål och i det röret skjuts en manganstålskärna in. Efter valsning dras kärnan ut och ett spolhål med invändigt foder av rostfritt stål bildas. Under uppvärmningen och valsningen av stålämnet sker normalt en koldiffusion från manganstålskärnan till det rostfria fodret. Fodrets syfte är att skydda spolhålets yta mot erosion och korrosion.Syftet med arbetet var att hitta en metod som garanterar uppkolning av det invändiga fodret, samt att utreda vad uppkolningen betyder för den mekaniska hållfastheten i stängerna. Ett laboratorieförsök visade att det var bra, med avseende på uppkolning, att blanda stearat i kärnbestrykningsmedlet. Kärnbestrykningsmedlet penslas på manganstålskärnan innan den förs in i stålämnet som ska valsas, dess syfte är att minska friktionen vid kärnutdragningen efter valsning.Ett försök utfördes i valsverket med stearat i kärnbestrykningsmedlet. En grundlig undersökning utfördes på två hetor som valsats med stearat-bestrykningsmedel, samt på en traditionellt tillverkad heta för att ha som referens. Hetorna kapades till provstänger om 1,5 m, totalt undersöktes 55 st.Utvärderingen av verksförsöket visade att stängernas kvalitet blir tillräckligt bra om ingenting oförutsett händer i produktionen, oavsett om koltillskott är tillsatt i bestrykningsmedlet eller inte. Arbetet gav inte en garanterande metod, men visade att stängerna normalt håller hög kvalitet.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This thesis has been done in ROM (Royal Ontario Museum) located in Toronto Canada. It focuses on learning in two parts of the museum. It tries to find out how much each part is effective in terms of learning. Studies have been done in the Digital gallery, which has been equipped with digital video projector and workstation that allows visitors to interact with the collections in 2 or 3 dimensional spaces while they are watching the presenting film. The rest of the study was in Hands-on laboratory, which allows students to examine artifacts and discuss their findings .The method was used in this research is Concept mapping .In Digital gallery, 24 schools surveys in the form of pre-post- test by help of the concept mapping method has been done. In Hands-on laboratory, 12 schools have been studied by using the combination of interviewing and written pre post-test of concept mapping.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Syftet med denna systematiska litteraturstudie var att beskriva faktorer som påverkade uppkomsten av hot och våld inom psykiatrin. Till resultatet har författarna använt sig av tjugoen vetenskapliga artiklar som hämtats ur Högskolan dalarnas databaser ELIN, Academic Search Elite samt Cinahl. Sökord i olika kombinationer har använts för att få fram relevant litteratur till studien. De sökord som användes var violence, nursing, mental health nurses, aggressive patients, aggressive behaviour, psychiatric units, patients, factors, prevention, aggression, nurses, psychiatric, management, psychiatry och causes. Även manuell sökning i tidskrifter har gjorts. Artiklarna skulle vara publicerade tidigast år 2000 om inte tidigare studier ansågs innehålla relevant fakta för studien. Granskning av artiklarna genomfördes med hjälp av granskningsmallar. Resultatet visade att bemötandet av patienter inom psykiatrisk vård var av stor betydelse för om hotfulla och våldsamma incidenter skulle inträffa. Att som vårdpersonal försöka förstå anledningen till den uppkomna situationen kunde leda till att dessa situationer kunde undvikas. Patienterna upplevde ofta att personalen inte lyssnade och detta var en vanlig orsak till att våldsamma incidenter uppstod. Vårdpersonalen ansåg istället att patientens sjukdom var orsaken till uppkomsten av hot och våld. På avdelningar där patienter med paranoida och psykotiska tendenser var intagna ökade risken för våldsamma situationer. Patienterna upplevde ofta tiden på den psykiatriska avdelningen som långtråkig och det påverkade stämningen. Både vårdpersonal och patienter ansåg att mer aktiviteter skulle minska aggressionen på avdelningen.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Inom friidrottens löpgrenar kan man idag se vid de stora galorna att det finns en person som har till uppgift att springa före övriga deltagare och springa i en viss fart som har beställts antingen av arrangörerna eller någon löpare. Denna person kallas för "hare" vars huvuduppgift är att se till att ett visst tempo hålls under loppet. Men vad har detta fenomen för effekt på idrottens värde? Detta arbete ger en beskrivning av fenomenet "haren" både ur historiskt perspektiv samt hur det ser ut i nutida läge. Genom diverse teorier om vad som skapar värde inom idrott och hur idrott bör utföras för att uppfattas som mer "äkta" har fenomenet sedan analyserats för att bestämma om fenomenet är något positivt eller negativt för idrottens värde. Prestationer är något som ska genomföras på egen hand och idrottaren skall besitta de resurser som krävs för att kunna genomföra ett lopp helt på egen hand och kunna hantera både interna och externa påfrestningar. Att inte veta vem som kommer att vinna är den ovisshet som skapar spänning och därmed värde inom idrott. Med haren har man eliminerat denna ovisshet för att i stället få spänning genom att fokusera loppen på att slå rekord. Detta sätt att skapa prestationer har en mycket negativ påverkan på idrottens värde vilket får en detaljerad analys i detta arbete.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Hot rolling process is heat input process. The heat energy in hot rolled steel coils can be utilized. At SSAB Strip Product Borlänge when the hot rolled steel coils came out of the hot rolling mill they are at the temperature range of 500°C to 800°C. Heat energy contained by the one hot rolled steel coil is about 1981Kwh whereas the total heat energy for the year 2008 is 230 GWh/year.The potential of heat is too much but the heat dissipation rate is too slow. Different factors on which heat dissipation rate depends are discussed.Three suggestions are proposed to collect the waste heat from hot rolled steel coils.The 2nd proposal in which water basin is suggested would help not only to collect the waste heat but to decrease in the cooling time.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

2004, the SSR, Akademikerförbundet, made a study on the threats and violence as a social secretary in the municipal social services are exposed in their occupation of the "social secretary of threats and violence at work" (T-110192), conducted by Temo ab. We have chosen to use the study on a smaller scale and then made contact with five municipalities in the middle of Sweden to investigate social secretaries experiences of threats and violence. Using the cross-sectional design and a convenience sample, we have gained access to data from 56 people. From a sociological perspective, we have chosen to use Norbert Elias theory of universal configuration and interdependence, and Michel Foucault’s theories concerning power search explanation for the existence of threats and violent situations in the contact between social workers and their clients.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Using a physically based model, the microstructural evolution of Nb microalloyed steels during rolling in SSAB Tunnplåt’s hot strip mill was modeled. The model describes the evolution of dislocation density, the creation and diffusion of vacancies, dynamic and static recovery through climb and glide, subgrain formation and growth, dynamic and static recrystallization and grain growth. Also, the model describes the dissolution and precipitation of particles. The impeding effect on grain growth and recrystallization due to solute drag and particles is accounted for. During hot strip rolling of Nb steels, Nb in solid solution retards recrystallization due to solute drag and at lower temperatures strain-induced precipitation of Nb(C,N) may occur which effectively retard recrystallization. The flow stress behavior during hot rolling was calculated where the mean flow stress values were calculated using both the model and measured mill data. The model showed that solute drag has an essential effect on recrystallization during hot rolling of Nb steels.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The surface failure characteristics of different work roll materials, i.e. High Speed Steel, High Chromium Iron and Indefinite Chill Iron, used in the finishing stands of a hot strip mill have been investigated using stereo microscopy, 3D optical profilometry, scanning electron microscopy and energy dispersive X-ray spectroscopy. The results show that the surface failure mechanisms of work rolls for hot rolling are very complex, involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation. Despite the differences in chemical composition and microstructure, the tribological response of the different work roll materials was found to be strongly dependent on the material microstructure and especially the presence and distribution of microstructural constituents, such as the different carbide phases and graphite (in the case of Indefinite Chill Iron). Cracking and chipping of the work roll surfaces, both having a negative impact on work roll wear, are strongly influenced by the presence of carbides, carbide networks and graphite in the work roll surface. Consequently, the amount of carbide forming elements as well as the manufacturing process must be controlled in order to obtain an optimised microstructure and a predictable wear rate.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pedagogues in the borderland of their social task: dealing with family law proceedings, threats and violence Drawing upon an explorative study of family law proceedings from a school perspective, the aim of this paper is to examine the school staff’s strategies for solving or coping with problematic situations in this context. Gendered conflicts between adults and violence are extreme cases for pedagogues in school and preschool. How do the staff cope with their own and the children’s vulnerability? Based upon interviews with 22 informants, the staff’s strategies are outlined and discussed in relation to organizational and professional circumstances and intersecting social relations of power. An analytical construction of six types of proactive and reactive strategies, ranging from distance keeping to normalization of own exposure, is utilized in the analysis. Findings suggest that the staff’s strategies to handle challenging events in this context vary with the parent’s gender, class position and ethnicity. Further, it is argued that creating a sense of safety and promoting learning among the children may be obstructed by lack of support from the school’s organization, demands on staff to perform customer oriented attitudes towards parents and lack of clarity concerning the limits of the social task. Conflicts between the organization and profession on the one hand and the educational and the social task on the other hand, are thus illuminated. In conclusion, a further aim of this article is to contribute to broader discussions on men’s violence against women and children – in families as well as in workplaces and in the intersection between these two areas. 

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Increase in work related violence. A reflection of changes in working conditions? An analysis based on the Swedish Work Environment surveys. Victim surveys from Sweden show that the proportion reporting exposure to work related violence has increased. On the basis of the Swedish Work Environment surveys 1991–2005 this article focuses on the following questions: What kind of situations and working conditions are related to workplace violence? And, has the number of employees exposed to these working conditions increased parallel to the rise of reported workplace violence? Logistic regression analysis shows that some situations and working conditions are indeed related tothe risk of violence. To some extent exposure to these working conditions co-varies with exposure to violence. This result is more prominent for women than for men. Further research is needed to understand how changes in working conditions affect the risk of violence and the development thereof, not least from a gender perspective. Even so, changes in working conditions can not alone explain the increase of reported workplace violence in Sweden during this period. It seems that the influence of changed working conditions offers an interesting complement to criminological theories of broadened definitions and decreasing tolerance against violence in problematizing how an increase in reported workplace violence should and could be understood.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Denna studie har till syfte att beskriva tre lärares erfarenheter av digitala hjälpmedel inom sfi-undervisningen med fokus riktat på iPad. Studien är kvalitativ och ger svar på frågor kring lärarnas erfarenhet av litteracitetsutveckling, motivation och det individuella arbetet i klassrummet. Metoden omfattas av intervjuer som bygger på tre frågeställningar. Hur upplever lärarna litteracitetsutveckling och motivation hos de studerande vid användning av iPad och ett annat digitalt hjälpmedel? Hur ser lärarna på de enskilda studenternas behov vid användning av iPad och ett annat digitalt hjälpmedel? Vilken utveckling ser lärarna med iPad i framtida perspektiv? . Resultatet har analyserats och diskuterats i relation till tidigare forskning kring litteracitet, digitala hjälpmedel i undervisningen samt en rapport om iPad i skolan. I den första frågeställningen är lärarna överens om att litteracitetsutvecklingen med iPad relateras till vilken nivå de studerande uppnått. Ju lägre skriftspråksutvecklingsnivå ju lämpligare är språkinlärning med iPad som digitalt hjälpmedel. Detta på grund av dess enkla användarvänlighet. Lärarna anser också att enkelheten och den snabba responsen som de studerande får har en motiverande effekt. De som uppnår en högre skriftspråksutvecklingsnivå i svenska och som behöver mer utvecklande skrivövningar använder i föreliggande undersökning dator. I andra frågan diskuteras den individuella aspekten kring användning av iPad. De tre lärarna i studien anser att iPaden är ett bra verktyg och de har positiva erfarenheter om de studerandes individuella arbete och kan på ett enkelt sätt tillgodose individuella önskemål och behov hos de studerande. I den tredje frågan diskuteras iPad i ett framtida perspektiv. De tre lärarna ser iPaden som ett bra verktyg i en vidare utveckling av sfi. De menar att Skolverkets krav tillgodoses på ett lämpligt sätt med detta digitala hjälpmedel.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This article is an analysis of the story of the killing of Ḥusayn b. ʿAlī at Karbalāʾ in 61/680, as it is presented by Abū Jaʿfar Muḥammad b. Jarīr al-Ṭabarī (d. 310/923). The main argument is that the notion of the divine covenant, which permeates the Qur’an, constitutes a framework through which al-Ṭabarī views this event. The Qur’anic idea of the covenant is read in structural/thematic continuity with the Hebrew Bible account of the covenant between Yahweh and the Hebrew people, which has, in turn, been traced back in its basic form to Late Bronze Era treaties between rulers and their vassals.   The present study focusses on four speeches ascribed to Ḥusayn during the encounter he and his group had with the vanguard of the Kūfan army led by al-Ḥurr. These are analysed in accordance with their use of Qur’anic covenant vocabulary. They are also categorised within the broader framework of the eight standard characteristics of Ancient West Asian and Biblical covenants, as presented by George Mendenhall and Gary Herion, which have recently been developed in a Qur’anic context by Rosalind Ward Gwynne. This article argues that al-Ṭabarī’s Karbalāʾ narrative presents the pact of loyalty to Ḥusayn as a clear extension of the divine covenant.