Improvement of Routine Test Process of High Voltage Power Capacitors

The capacitor test process at ABB Capacitors in Ludvika must be improved to meet future demands for high voltage products. To find a solution to how to improve the test process, an investigation was performed to establish which parts of the process are used and how they operate. Several parts which can improves the process were identified. One of them was selected to be improved in correlation with the subject, mechanical engineering. Four concepts were generated and decision matrixes were used to systematically select the best concept. By improving the process several benefits has been added to the process. More units are able to be tested and lead time is reduced. As the lead time is reduced the cost for each unit is reduced, workers will work less hours for the same amount of tested units, future work to further improve the process is also identified. The selected concept was concept 1, the sway stop concept. This concept is used to reduce the sway of the capacitors as they have entered the test facility, the box. By improving this part of the test process a time saving of 20 seconds per unit can be achieved, equivalent to 7% time reduction. This can be compared to an additional 1400 units each year.

Module property verification : A method to plan and perform quality verifications in modular architectures

Modular product architectures have generated numerous benefits for companies in terms of cost, lead-time and quality. The defined interfaces and the module’s properties decrease the effort to develop new product variants, and provide an opportunity to perform parallel tasks in design, manufacturing and assembly. The background of this thesis is that companies perform verifications (tests, inspections and controls) of products late, when most of the parts have been assembled. This extends the lead-time to delivery and ruins benefits from a modular product architecture; specifically when the verifications are extensive and the frequency of detected defects is high. Due to the number of product variants obtained from the modular product architecture, verifications must handle a wide range of equipment, instructions and goal values to ensure that high quality products can be delivered. As a result, the total benefits from a modular product architecture are difficult to achieve. This thesis describes a method for planning and performing verifications within a modular product architecture. The method supports companies by utilizing the defined modules for verifications already at module level, so called MPV (Module Property Verification). With MPV, defects are detected at an earlier point, compared to verification of a complete product, and the number of verifications is decreased. The MPV method is built up of three phases. In Phase A, candidate modules are evaluated on the basis of costs and lead-time of the verifications and the repair of defects. An MPV-index is obtained which quantifies the module and indicates if the module should be verified at product level or by MPV. In Phase B, the interface interaction between the modules is evaluated, as well as the distribution of properties among the modules. The purpose is to evaluate the extent to which supplementary verifications at product level is needed. Phase C supports a selection of the final verification strategy. The cost and lead-time for the supplementary verifications are considered together with the results from Phase A and B. The MPV method is based on a set of qualitative and quantitative measures and tools which provide an overview and support the achievement of cost and time efficient company specific verifications. A practical application in industry shows how the MPV method can be used, and the subsequent benefits

Den växande dagligvaruhandeln på internet : En fallstudie om MatHem i Sverige AB

Bakgrund Dagligvaruhandel på internet växer och efterfrågas från fler kunder än någonsin tidigare. De större aktörerna märker att efterfrågan finns och inser att de behöver utöka sina försäljningskanaler, samtidigt som de mindre företagen som varit med och bidragit till denna efterfrågan behöver arbeta för att hålla sina kunder lojala och inte förlora marknadsandelar när marknadssituationen förändras av de stora aktörerna. Den förändrade konkurrenssituationen innebär att företag behöver lägga större fokus på kunden genom strategi och framförallt uppbyggnaden av lojalitet. Syfte Syftet är att få en ökad kunskap om hur ett företag som var tidigt ute på en marknad håller sina kunder lojala i samband med att konkurrenssituationen förändras. Metod För att besvara syftet har en kvalitativ fallstudie om företaget MatHem gjorts, för att slutligen kunna dra en generaliserad slutsats. Där insamling av primärdata och sekundärdata har analyserats för att slutligen nå en slutsats. Slutsats Det undersökta företaget håller sina kunder lojala genom att ha en hög generell kvalitet. Vilket betyder att de har hög kvalitet på produkterna, väl fungerande kundservice, överträffar kundens förväntningar och ett brett sortiment. När konkurrenssituationen förändras har företaget inga speciella strategier för att hålla sina kunder lojala, eftersom att företaget inte ser de andra aktörerna som konkurrenter. Företaget är den dyraste aktören på marknaden, men differentierar sig med ekologiska produkter för att erhålla lojala kunder.